At 07:47 AM 9/9/2009, Barney Cordoba wrote:
> www.sentex.net/mike > > > > > > The 8241GI may not be able to
> handle full gigabit flows if > its only > wired at 32-bit 33Mhz,
> which is only capable of bursting to > 1Gb/s. With > a single NIC
> it likely just fine, but it a bridged or > firewall type > config
> you may just be seeing bus failures. > > Barney I meant
> 82541EI...Same answer.
Both of the NICs on this motherboard are wired in. I will see if
there is a spare pcie slot and try a different em nic. Its also a
single nic. No bridge or forwarding as all the packets are destined
to the machine itself.
---Mike
>_______________________________________________
>freebsd-net at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-net
>To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike