testers for bge(4) needed (possible fix for ASF + hang)
Bjoern A. Zeeb
bzeeb-lists at lists.zabbadoz.net
Tue Oct 13 20:45:08 UTC 2009
Hi,
this is believed to fix hangs upon boot when the interfaces are
configured and ASF is enabled. As seen in the PRs, this is often
observed on HP servers.
In case you have a bge machine not affected by that it owuld be really
helpful if you could test the change anyway to assure this doesn't
break any of the several dozen chip revisions we couldn't test.
The patch is also fetchable from
http://people.freebsd.org/~bz/20091011-01-bge-asf.diff
In case it doesn't apply to your older version of the driver cleanly
let me know and I'll do a patch for your version as well.
In case you find a regression with that let me know immediately with:
uname -mr; dmesg | grep bge ; pciconf -lv | grep ^bge
Thanks a lot.
/bz
--
Bjoern A. Zeeb It will not break if you know what you are doing.
---------- Forwarded message ----------
Date: Tue, 13 Oct 2009 20:22:12 +0000 (UTC)
From: Bjoern A. Zeeb <bz at FreeBSD.org>
To: src-committers at freebsd.org, svn-src-all at freebsd.org,
svn-src-head at freebsd.org
Subject: svn commit: r198049 - head/sys/dev/bge
Author: bz
Date: Tue Oct 13 20:22:12 2009
New Revision: 198049
URL: http://svn.freebsd.org/changeset/base/198049
Log:
Immediately after clearing a pending callout that didn't make it due
to the lock we hold, disable interrupts, and announce to the firmware
that we are shutting down. Especially do this before disabling blocks.
This makes some types of machines with asf enabled no longer hang upon
boot, when we start configuring the interface.
PR: i386/96382, kern/100410, kern/122252, kern/116328
Reported by: erwin
Hardware provided by: TDC A/S
Reviewed by: stas
Tested by: stas
Modified:
head/sys/dev/bge/if_bge.c
Modified: head/sys/dev/bge/if_bge.c
==============================================================================
--- head/sys/dev/bge/if_bge.c Tue Oct 13 20:21:17 2009 (r198048)
+++ head/sys/dev/bge/if_bge.c Tue Oct 13 20:22:12 2009 (r198049)
@@ -4270,6 +4270,16 @@ bge_stop(struct bge_softc *sc)
callout_stop(&sc->bge_stat_ch);
+ /* Disable host interrupts. */
+ BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR);
+ bge_writembx(sc, BGE_MBX_IRQ0_LO, 1);
+
+ /*
+ * Tell firmware we're shutting down.
+ */
+ bge_stop_fw(sc);
+ bge_sig_pre_reset(sc, BGE_RESET_STOP);
+
/*
* Disable all of the receiver blocks.
*/
@@ -4309,16 +4319,6 @@ bge_stop(struct bge_softc *sc)
BGE_CLRBIT(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE);
}
- /* Disable host interrupts. */
- BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR);
- bge_writembx(sc, BGE_MBX_IRQ0_LO, 1);
-
- /*
- * Tell firmware we're shutting down.
- */
-
- bge_stop_fw(sc);
- bge_sig_pre_reset(sc, BGE_RESET_STOP);
bge_reset(sc);
bge_sig_legacy(sc, BGE_RESET_STOP);
bge_sig_post_reset(sc, BGE_RESET_STOP);
More information about the freebsd-net
mailing list