MPD Multiple PPPoE to same ISP

[Thodoris S.]

I am trying to make Multiple PPPoE Connections to the Same ISP for
Load Balancing  reasons
my mpd.conf is:
default:
        load adsl0
        load adsl1
        load adsl2

adsl0:
        new -i ng0 pppoe0 pppoe0
        set iface route default
        set iface disable on-demand
        set iface idle 0
        set bundle disable multilink
        set bundle authname "***"
        set bundle password "***"
        set bundle no noretry
        set link keep-alive 10 60
        set link max-redial 0
        set link no acfcomp protocomp
        set link disable pap chap
        set link accept chap
        set link mtu 1492
        set ipcp yes vjcomp
        set ipcp ranges 0.0.0.0/0.0.0.0/0
        set ipcp enable req-pri-dns
        set ipcp enable req-sec-dns
        open

adsl1:
        new -i ng1 pppoe1 pppoe1
        set iface route default
        set iface disable on-demand
        set iface idle 0
        set bundle disable multilink
        set bundle authname "***"
        set bundle password "***"
        set bundle no noretry
        set link keep-alive 10 60
        set link max-redial 0
        set link no acfcomp protocomp
        set link disable pap chap
        set link accept chap
        set link mtu 1492
        set ipcp yes vjcomp
        set ipcp ranges 0.0.0.0/0.0.0.0/0
        set ipcp enable req-pri-dns
        set ipcp enable req-sec-dns
        open

adsl2:
        new -i ng2 pppoe2 pppoe2
        set iface route default
        set iface disable on-demand
        set iface idle 0
        set bundle disable multilink
        set bundle authname "***"
        set bundle password "***"
        set bundle no noretry
        set link keep-alive 10 60
        set link max-redial 0
        set link no acfcomp protocomp
        set link disable pap chap
        set link accept chap
        set link mtu 1492
        set ipcp yes vjcomp
        set ipcp ranges 0.0.0.0/0.0.0.0/0
        set ipcp enable req-pri-dns
        set ipcp enable req-sec-dns
        open

And mpd.links is:
pppoe0:
        set link type pppoe
        set pppoe iface em0
        set pppoe service "we"
        set pppoe enable originate
        set pppoe disable incoming

pppoe1:
        set link type pppoe
        set pppoe iface em1
        set pppoe service "we1"
        set pppoe enable originate
        set pppoe disable incoming

pppoe2:
        set link type pppoe
        set pppoe iface bce1
        set pppoe service "we2"
        set pppoe enable originate
        set pppoe disable incoming

The problem is tha only one (the first logged in) ng interface gets ip
assigned to it, all others assigned to lo0 interface
and when i am trying to NAT them with PF it gives me this error:
/etc/pf.conf:26: could not parse host specification

im giving you ifconfig and netstat -nr

ifconfig:
[root at emperor ~]# ifconfig
bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
	ether 00:1e:c9:db:24:7f
	inet 192.168.0.1 netmask 0xfffffff8 broadcast 192.168.0.7
	media: Ethernet autoselect (1000baseTX <full-duplex>)
	status: active
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
	ether 00:15:17:78:fd:56
	inet 192.168.101.1 netmask 0xffffff00 broadcast 192.168.101.255
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
	ether 00:15:17:78:fb:41
	inet 192.168.102.1 netmask 0xffffff00 broadcast 192.168.102.255
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
bce1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
	ether 00:1e:c9:db:24:7d
	inet 192.168.103.1 netmask 0xffffff00 broadcast 192.168.103.255
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
	inet6 ::1 prefixlen 128
	inet 127.0.0.1 netmask 0xff000000
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33204
ng0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric
0 mtu 1492
	inet 11.11.11.11 --> 12.12.12.2 netmask 0xffffffff
ng1: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric
0 mtu 1492
ng2: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric
0 mtu 1492

nestat -nr:
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            192.168.0.2      UGS         0    13812   bce0
192.168.0.0/29   link#1             UC          0        0   bce0
12.12.12.2       11.11.11.11       UH          0        0    ng0
33.33.33.33       lo0                UHS         0     4797    lo0
22.22.22.22        lo0                UHS         0     1370    lo0
11.11.11.11       lo0                UHS         0        0    lo0
127.0.0.1          127.0.0.1          UH          0        0    lo0
192.168.101.0/24   link#2             UC          0        0    em0
192.168.102.0/24   link#3             UC          0        0    em1
192.168.103.0/24   link#4             UC          0        0   bce1


Can you help me please

Thanks in advance
Stamatopoulos Theodoros