CARP on FreeBSD 7,2

[Sam Wan]

The following command also failed:

test:~ # ifconfig carp1 vhid 1 pass password 192.168.2.144/24 up
ifconfig: ioctl (SIOCAIFADDR): Can't assign requested address

>
> Hi,
>
> I tried to setup CARP in FreeBSD 7.2, but seems not able to assign IP to
> the carp interfaces.
>
> Here is my rc.conf file:
>
> hostname="test.ip6.com.au"
> ifconfig_fxp0="inet 192.168.1.248  netmask 255.255.255.0"
> sshd_enable="YES"
>
> pf_enable="YES"
> pf_rules="/etc/pf.anti-spam.conf"
> pf_flags=""
> pflog_enable="YES"
> pflog_logfile="/var/log/pflog"
> pflog_program="/sbin/pflogd"
> pflog_flags=""
> pfsync_enable="NO"
> pfsync_syncdev=""
> pfsync_ifconfig=""
>
> cloned_interfaces="carp1"
> ifconfig_carp1="up 24.214.165.129/25 vhid 2 pass privatepassword"
>
>
> test:~ # ifconfig
> fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         options=8<VLAN_MTU>
>         ether 00:13:20:65:ad:bd
>         inet 192.168.1.248 netmask 0xffffff00 broadcast 192.168.1.255
>         media: Ethernet autoselect (100baseTX <full-duplex>)
>         status: active
> plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu
> 1500
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
>         inet6 ::1 prefixlen 128
>         inet 127.0.0.1 netmask 0xff000000
> pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33204
> pfsync0: flags=0<> metric 0 mtu 1460
>         syncpeer: 224.0.0.240 maxupd: 128
> carp1: flags=9<UP,LOOPBACK> metric 0 mtu 1500
>         carp: INIT vhid 1 advbase 1 advskew 50
>
> What have I missed?
>
> Thanks
>
>
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>
>