kern/132722: [ath] Wifi ath0 associates fine with AP, but DHCP or IP does not work

[Matthias Apitz]

El día Thursday, March 19, 2009 a las 08:44:29AM -0700, Sam Leffler escribió:

> Matthias Apitz wrote:
> >El día Tuesday, March 17, 2009 a las 11:56:24AM -0700, Sam Leffler 
> >escribió:
> >
> >  
> >>His setup is static key wep; not wpa so I don't think wpa_supplicant is 
> >>the issue.
> >>
> >>Matthias, your tcpdump of the dhclient packets isn't usable; please try:
> >>
> >>tcpdump -i ath0 -n -y IEEE802_11_RADIO
> >>
> >>I reviewed the driver to the code in HEAD and the only difference in the 
> >>crypto area should not matter in this case.  It's possible wme is 
> >>somehow enabled and causing problems but the ifconfig output doesn't 
> >>indicate that.
> >>
> >>If you can find out the model of ap that might be helpful.  
> >>Unfortunately the best thing to try is HEAD.
> >>...

I'm going to build a HEAD kernel now with

# cd /usr
# mv src/sys src/sys.RELENG_7
# setenv CVSROOT :pserver:anoncvs at anoncvs.tw.FreeBSD.org:/home/ncvs
# cvs checkout src/sys
...

I've checked the FreeBSD handbook about SVN / CVS and it reads that all
changes in SVN are back ported to CVS trees... just to make sure, is that
reality?

Thx

	matthias

-- 
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <matthias.apitz at oclc.org> - w http://www.oclc.org/ http://www.UnixArea.de/