re0: Unknown H/W revision: 0x28000000 device_attach: re0 attach returned 6

[Andrew Tulloch]

I've just installed from the FreeBSD 7.1-BETA1 iso and get the
following when the re driver attempts to attach to the two onboard
NICs found on a Gigabyte GA-EX58-UD5 motherboard:

re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit
Ethernet> port 0x9e00-0x9eff mem
0xfd3ff000-0xfd3fffff,0xfd3f8000-0xfd3fbfff irq 16 at device 0.0 on
pci8
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00100000
re0: Unknown H/W revision: 0x28000000
device_attach: re0 attach returned 6
pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib9
re1: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit
Ethernet> port 0x8e00-0x8eff mem
0xfd1ff000-0xfd1fffff,0xfd1f8000-0xfd1fbfff irq 17 at device 0.0 on
pci9
re1: Chip rev. 0x28000000
re1: MAC rev. 0x00100000
re1: Unknown H/W revision: 0x28000000
device_attach: re1 attach returned 6

pciconf -lvc extract:
re0 at pci0:8:0:0:	class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x03 hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
    class      = network
    subclass   = ethernet
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit
    cap 10[70] = PCI-Express 2 endpoint IRQ 0
    cap 11[ac] = MSI-X supports 4 messages in map 0x20
    cap 03[cc] = VPD
re1 at pci0:9:0:0:	class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x03 hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
    class      = network
    subclass   = ethernet
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit
    cap 10[70] = PCI-Express 2 endpoint IRQ 0
    cap 11[ac] = MSI-X supports 4 messages in map 0x20
    cap 03[cc] = VPD


Is there any simple patch I can apply to get the driver to attach,
assuming it should work?

Thanks,
Andrew