Sangoma A301?

[Kurt Buff]

Alex,

Your reminder about clear channel got me going.

I think I've got this thing configured - the wancfg program isn't
completely intuitive, but it's pretty good, and after banging around
in it, I think I've got it configured.

We're awaiting cable pull for the coax, about 200 ft from demarc to
server room, and then circuit turn-up and addressing, etc., from the
ISP.

I've configured the card with some RFC1918 addresses so that I could
complete the configuration.

ifconfig reveals those addresses on the wag1 interface after reboot,
and the messages on console indicate goodness too, so I think I'm good
to go. The ISP says the protocol will be Cisco HDLC, so that's what I
configured it with.

I know I'll have more questions later, but for now this looks like success.

Thanks,

Kurt

On Mon, Mar 17, 2008 at 11:36 PM, Alex Feldman <alex at sangoma.com> wrote:
> Hi Kurt,
>
>  We support DS3 card but only clear channel. We don't have fractional DS3
>  support.
>
>  Did u try to load this card? Does it recognize by kernel?
>
>  If you have any questions, please feel free to contact me.
>
>  Alex
>  Sangoma Technologies
>
>
>
>
>  -----Original Message-----
>  From: owner-freebsd-net at freebsd.org [mailto:owner-freebsd-net at freebsd.org]
>  On Behalf Of Kurt Buff
>  Sent: March 17, 2008 5:17 PM
>  To: freebsd-net at freebsd.org
>  Subject: Sangoma A301?
>
>  I've just received mine, and am trying to get FreeBSD 6.3 Release to
>  recognize it.
>
>  The application for this card is a fractional DS3 circuit that we're
>  getting installed soon, and the box will eventually manage multiple
>  links with BGP.
>
>  I've been reading the docs from the Sangoma web site, and while they
>  talk about FreeBSD installation/diagnostics/configuration/etc., they
>  don't mention either the A301 or DS3 circuits.
>
>  I've installed the wanpipe software (3.2.1), but am at this point lost
>  in the thickets of the sparse documentation. Before I send off a
>  message to their tech support, does anyone have words of wisdom for
>  me?
>
>
>  Thanks,
>
>  Kurt
>  _______________________________________________
>  freebsd-net at freebsd.org mailing list
>  http://lists.freebsd.org/mailman/listinfo/freebsd-net
>  To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>
>