bridging ath

[Michael K. Smith - Adhost]

> 
> Andrew Thompson wrote:
> > On Wed, Sep 26, 2007 at 04:07:00PM -1000, Randy Bush wrote:
> >> current i386 thinkpad t41
> >>
> >> ifconfig_lo0="inet 127.0.0.1/8"
> >> cloned_interfaces="bridge0"
> >> ifconfig_bridge0="inet 192.168.0.3/24 addm em0 addm ath0 up"
> >> ifconfig_em0="up"
> >> ifconfig_ath0="ssid rgnet up"
> >> defaultrouter="192.168.0.1"
> >>
> >> with ether plugged in, i can ping it.  unplug ether and no ping
over
> >> ath0.  other hosts are on same ssid and working.
> >
> > I will try to reproduce this in the weekend. Just to make sure, you
> are
> > pinging 192.168.0.3 from a remote wireless node connected to ath0,
> and
> > unplugging em0 causes this to fail?
> 
> connect both wireless and ether.  it is pingable. disconnect ether.
no
> can ping.
> 
> reduce to
>   ifconfig_ath0="inet 192.168.0.3/24 ssid rgnet up"
> with no em0, bridge, ... and it is pingable.
> 
> randy
> 

Just to be sure...

net.inet.ip.forwarding=1
net.link.ether.bridge.enable=1
net.link.ether.bridge.config=em0,ath0