re0: RealTek 8168/8111B: no carrier

[Alexander Shikoff]

On Wed, Nov 07, 2007 at 09:24:30AM +0900, Pyun YongHyeon wrote:
>  > > # pciconf -lv
>  > > [...]
>  > > re0 at pci0:3:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x01 hdr=0x00
>  > >     vendor     = 'Realtek Semiconductor'
>  > >     device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
>  > >     class      = network
>  > >     subclass   = ethernet
>  > > [...]
>  > 
>  > Further investigation... It seems that re(4) driver does not
>  > support auto-negotiation correctly. If I manually set media to 100baseTX and 
>  > bring up interface with 'ifconfig re0 up' then it works.
>  > 
> 
> Would you show me more information for link partner(i.e. FreeBSD 6.2 box)?

Yes, of course:

FreeBSD 6.2-STABLE			7.0-BETA2
	rl0	<===================>	   re0

rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xfa000000-0xfa0000ff irq 21 at device 1.0 on pci2
miibus0: <MII bus> on rl0
rl0: Ethernet address: 00:e0:7d:db:ca:98
rl0: link state changed to UP

# pciconf -lv
rl0 at pci2:1:0:   class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
    class      = network
    subclass   = ethernet

-- 
Kind Regards,	Alexander Shikoff
minotaur at crete.org.ua
Mob.: +380 67 946 31 49