mpd and vlan

[Mihai Tanasescu]

Ganbold wrote:
> Mihai Tanasescu wrote:
>> Sorry for asking as a follow-up to your question...but do you have a 
>> working config for MPD and pptp.
>>
>>
>> I'm desperately trying to get mine to work...but mpd refuses to 
>> listen to connections on my interface (it starts, it gives no errors, 
>> it loads the pptp1 config, I can access its console, etc).
>>
>>
>>
>>
>>
>>
> Something like:
>
> default:
>    load pptp0
>    load pptp1
>
> pptp0:
>    new -i ng0 pptp0 pptp0
>    set ipcp ranges 192.168.1.2/32 192.168.5.1/24
>    load pptp_standard
>
> pptp1:
>    new -i ng1 pptp1 pptp1
>    set ipcp ranges 192.168.1.2/32 192.168.5.2/24
>    load pptp_standard
>
> pptp_standard:
>
>        set iface idle 0
>        set iface disable on-demand
>        set iface disable proxy-arp
>        set iface enable tcpmssfix
>        set iface mtu 1500
>        set iface route default
>        set iface enable radius-session
>
>        set bundle no multilink
>        set bundle disable multilink
>        set bundle enable compression
>        set bundle max-logins 3
>        set bundle enable radius-acct
>        set bundle enable radius-auth
>
> #        set link type pptp
>        set link no pap
>        set link enable chap
>        set link keep-alive 10 60
>        set link max-redial -1
>        set link yes acfcomp protocomp
>        set link mtu 1460
>        set link latency 0
>
>
>    set ipcp dns 192.168.1.1 192.168.0.1
>    set ipcp yes vjcomp
>
>        set ccp yes mppc
>        set ccp yes mpp-e40
>
>
>
> mpd.links
> ---------------------------------------
> pptp0:
>        set link type pptp
>        set pptp self 192.168.1.1
>        set pptp enable incoming
>        set pptp disable originate
> pptp1:
>        set link type pptp
>        set pptp self 192.168.1.1
>        set pptp enable incoming
>        set pptp disable originate
>
>        set ccp yes mpp-e128
>        set ccp yes mpp-stateless
>
>        set pptp self 192.168.1.1
>        set pptp enable incoming
>        set pptp disable originate
>
> ###############
>
>    set radius timeout 10
>    set radius config /usr/local/etc/mpd/radius.conf
>    set radius retries 3
>
> I tested it a long ago with mpd-3.18. It worked at that time.
>
> hth,
>
> Ganbold
>
>

Thanks,

Now it works...got to figure out what I was missing.