em(4)/82571eb: fifo not dma'ed to host memory
Jack Vogel
jfvogel at gmail.com
Tue Jul 24 16:25:51 UTC 2007
Hmmm, this looks like a bug, I will look more closely today.
Sorry I have not been able to be more active with your problem,
but things have been hectic with product launches and my own
internal bug fixing. I will try to get this turned around quickly
Patrick.
Jack
On 7/24/07, Patrick Oeschger <paketix at bluewin.ch> wrote:
> OK - found the problem
> the driver in 6.2-RELEASE has different code in em_identify_hardware
> my hardware needs the memory access and bus master bits getting set by
> the driver
> beginning with 6.2-RELEASE this gets only set if PCIM_CMD_BUSMASTEREN is
> *not set* and PCIM_CMD_MEMEN is *set* - it seems the 82571EB has both
> parameters *not set* after init
> is this a bug? feature? typo?
>
> --- /root/em/if_em.c.61 Mon Jul 23 12:17:35 2007
> +++ if_em.c.62 Tue Jul 24 13:04:11 2007
> static void
> -em_identify_hardware(struct adapter * adapter)
> +em_identify_hardware(struct adapter *adapter)
> {
> device_t dev = adapter->dev;
>
> /* Make sure our PCI config space has the necessary stuff set */
> adapter->hw.pci_cmd_word = pci_read_config(dev, PCIR_COMMAND, 2);
> - if (!((adapter->hw.pci_cmd_word & PCIM_CMD_BUSMASTEREN) &&
> - (adapter->hw.pci_cmd_word & PCIM_CMD_MEMEN))) {
> - printf("em%d: Memory Access and/or Bus Master bits were not set!
> \n",
> - adapter->unit);
> + if ((adapter->hw.pci_cmd_word & PCIM_CMD_BUSMASTEREN) == 0 &&
> + (adapter->hw.pci_cmd_word & PCIM_CMD_MEMEN)) {
> + device_printf(dev, "Memory Access and/or Bus Master bits "
> + "were not set!\n");
> adapter->hw.pci_cmd_word |=
> (PCIM_CMD_BUSMASTEREN | PCIM_CMD_MEMEN);
> - pci_write_config(dev, PCIR_COMMAND, adapter->hw.pci_cmd_word, 2)
> ;
> + pci_write_config(dev, PCIR_COMMAND,
> + adapter->hw.pci_cmd_word, 2);
> }
>
> > thanks for your feedback jack - i tried the MSI stuff as first task this
> > morning
> > the interface init'ed without a problem and did not complain about MSI
> > what i like most is that no IRQ is assigned now, everything seems to get
> > handled in a TASKQ (IRQs were quite weird sometimes when having a bunch of
> > interfaces...)
> >
> > but now the bad news: even with MSI it is not possible to recv any frames
> > what makes me curious is, that the head pointer for receive fifo is *not*
> > counting up after receiving a frame (good_packets counter incrementing)
> > as far as i understand the 82571EB chipset manual, recv head counter inc
> > is done in hardware after receiving a good_packet and having dma'ed it to
> > host memory
> > from if_em.c/em_process_receive_interrupts:
> > * This routine executes in interrupt context. It replenishes
> > * the mbufs in the descriptor and sends data which has been
> > * dma'ed into host memory to upper layer.
> >
> > i did a quick test to check this on 6.1-RELENG by inserting a return
> > at the top of em_process_receive_interrupts (see diff)
> > register RDH0 is still incrementing for each good_packet received - even
> > without receive interrupts being processed at the driver level
> >
> > freebsd61# sysctl dev.em.0.debug_info=1
> > dev.em.0.debug_iemnfo: 0:-1 Adapter hardware address = 0xc4b7c928
> > em0: CTRL = 0x81c0241 RCTL = 0x8002
> > em0: RDBAH0 = 0x0 RDBAL0 = 0x3e0ff000
> > em0: RDLEN0 = 0x1000 RDH0 = 0x3
> > em0: RDT0 = 0xff RXDCTL = 0x10000
> >
> > ...so IMHO this increment (and also dma transfer to host memory) is done
> > in hardware - RDH0 is not counting up when running under 7.0-CURRENT...
> >
> > erroneous init of chipset?
> > anyone else running 7.0-CURRENT on a 82571EB pci express chipset?
> >
> > TIA for any help on this
> > pat
> >
> > details for dmesg/if_stats/diff:
> >
> > pcib9: <PCI-PCI bridge> irq 19 at device 11.0 on pci2
> > pcib9: secondary bus 9
> > pcib9: subordinate bus 9
> > pcib9: I/O decode 0x6000-0x6fff
> > pcib9: memory decode 0xfd700000-0xfd7fffff
> > pcib9: prefetched decode 0xfce00000-0xfcefffff
> > pci9: <PCI bus> on pcib9
> > pci9: physical bus=9
> > found-> vendor=0x8086, dev=0x105e, revid=0x06
> > bus=9, slot=0, func=0
> > class=02-00-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=255
> > powerspec 2 supports D0 D3 current D0
> > MSI supports 1 message, 64 bit
> > map[10]: type Memory, range 32, base 0, size 17, memory disabled
> > map[14]: type Memory, range 32, base 0, size 17, memory disabled
> > map[18]: type I/O Port, range 32, base 0, size 5, port disabled
> > found-> vendor=0x8086, dev=0x105e, revid=0x06
> > bus=9, slot=0, func=1
> > class=02-00-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=b, irq=255
> > powerspec 2 supports D0 D3 current D0
> > MSI supports 1 message, 64 bit
> > map[10]: type Memory, range 32, base 0, size 17, memory disabled
> > map[14]: type Memory, range 32, base 0, size 17, memory disabled
> > map[18]: type I/O Port, range 32, base 0, size 5, port disabled
> > em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> at device
> > 0.0 on pci9
> > pcib9: em0 requested memory range 0xfd700000-0xfd7fffff: good
> > pcib2: em0 requested memory range 0xfd700000-0xfd7fffff: good
> > pcib1: em0 requested memory range 0xfd700000-0xfd7fffff: good
> > em0: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at 0xfd700000
> > em0: attempting to allocate 1 MSI vectors (1 supported)
> > msi: routing MSI IRQ 256 to vector 49
> > em0: using IRQ 256 for MSI
> > em0: bpf attached
> > em0: Ethernet address: 00:10:f3:0c:5b:2a
> > em0: [FILTER]
> > pci9: <network, ethernet> at device 0.1 (no driver attached)
> >
> > freebsd61# diff -u sys/dev/em/if_em.c.orig sys/dev/em/if_em.c
> > --- sys/dev/em/if_em.c.orig Wed Jul 18 07:32:53 2007
> > +++ sys/dev/em/if_em.c Wed Jul 18 07:48:42 2007
> > @@ -277,6 +277,11 @@
> >
> > INIT_DEBUGOUT("em_probe: begin");
> >
> > + // prevent init of all em(4) devices except pci9/0/0
> > + if(pci_get_bus(dev) != 0x09 || pci_get_slot(dev) != 0x00 ||
> > + pci_get_function(dev) != 0x00)
> > + return (ENXIO);
> > +
> > pci_vendor_id = pci_get_vendor(dev);
> > if (pci_vendor_id != EM_VENDOR_ID)
> > return(ENXIO);
> > @@ -2906,6 +2911,8 @@
> > u_int8_t eop = 0;
> > u_int16_t len, desc_len, prev_len_adj;
> > int i;
> > +
> > + return;
> >
> > /* Pointer to the receive descriptor being examined. */
> > struct em_rx_desc *current_desc;
> >
> > On Tue, Jul 17, 2007 at 09:17:36AM -0700, Jack Vogel wrote:
> > > As an experiment, search in if_em.c for 'msix' look at the logic there.
> > > If the adapter is 82575 it will use msix, but the else clause has it
> > > use msi ONLY if its '>82571', change that to >=82571 and let's
> > > see if maybe using MSI will help you with your problems as I'm
> > > pretty confident its interrupt related.
> > >
> > > I had intended on making this change shortly anyway, my tests
> > > have shown the 571 to work fine this way.
> > >
> > > Let me know of the results.
> > >
> > > Jack
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>
More information about the freebsd-net
mailing list