Dynamode USB NIC

[Giles Williams]

hmm ok.

erm being a bit of a noob - any chance you could explain how to do this?

Thanks,
Giles.

On 4 Aug 2007, at 17:30, Bjoern A. Zeeb wrote:

> On Sat, 4 Aug 2007, Giles Williams wrote:
>
> Hi,
> Cc:ing net@ again
>
>
>> Thanks for getting back to me!
>>
>> I've looked, and udav is loaded, I already tried that a while  
>> back. Execing usbdevs -v gives:
>>
>> bsdbox# usbdevs -v
>> Controller /dev/usb0:
>> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),  
>> Intel(0x0000), rev 1.00
>> port 1 addr 2: full speed, power 144 mA, config 1, Davicom CO., LTD 
>> (0x9601), DM9601 USB NNC(0x0a46), rev 1.01
>> port 2 powered
>
> For FreeBSD HEAD sources it looks like this:
>
> ...
> } udav_devs [] = {
>         /* Corega USB-TXC */
>         {{ USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB_TXC }, 0},
>         /* ShanTou ST268 USB NIC */
>         {{ USB_VENDOR_SHANTOU, USB_PRODUCT_SHANTOU_ST268 }, 0},
> #if 0
>         /* DAVICOM DM9601 Generic? */
>         /*  XXX: The following ids was obtained from the data  
> sheet.  */
>         {{ 0x0a46, 0x9601 }, 0},
> #endif
> };
> ...
>
> As you can see, you ID is disabled with the #if 0. It seems it was
> that way since the very first version. I cannot say what it's the way
> it is.
>
> You could try to change it to #if 1 and recompile and see if it
> panics or works...
>
> -- 
> Bjoern A. Zeeb                                 bzeeb at Zabbadoz  
> dot NeT
> Software is harder than hardware  so better get it right the first  
> time.