Info required for MLFR testing

[Julian Elischer]

ASHA GOWDA wrote:

>Hi ,
>
>For testing  MLFR application in the MLFR to FR
>direction, we are sending IP over PPP Packet through
>Adtech Multi Layer ports.
>We need to make some changes in the PPP Header to be
>used for MLFR Traffic.
>  
>

does mlfr require ppp?
why not just use mlppp?

>Can we know the changes to be made for the same(like
>PID to be used nad seq no....)?
>Our test setup is like this :
>
>Our Target Machine was connected on one side to Adtech
>OC -12 Port and the other side was connected to Multi
>Layer OC-12 Port.
>
>  
>
You should probably write a netgraph-capable driver for the card, as teh 
frame relay
drivers etc are all netgraph and it will probably make it easier for you 
if you do this.

>Multi Layer Port of Adtech was used for MLFR side(MLFR
>to FR side) and general OC-12 Port of Adtech was used
>FR side(FR to MLFR side)
>  
>

you don't say what release of FreeBSD you are doing this on... (or even 
if it IS freeBSD you are using)

>Thanks in advance!!!!!
>Asha.
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam?  Yahoo! Mail has the best spam protection around 
>http://mail.yahoo.com 
>_______________________________________________
>freebsd-net at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-net
>To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>  
>