Marvell/SysKonnect YukonII source code available
Norikatsu Shigemura
nork at FreeBSD.org
Tue Jan 24 06:14:03 PST 2006
On Tue, 24 Jan 2006 11:19:05 +0100
Andre Oppermann <andre at freebsd.org> wrote:
> Marvell/SysKonnect made the source code to the YukonII chips available
> today under a BSD license:
> http://people.freebsd.org/~andre/mykbsd60x86-8.12.1.3-src.tgz
> I haven't tested the driver yet and I don't know if it available directly
> from the their website already.
> Many thanks to Gerald and Frank at SysKonnect for working with us and
> making this possible!
Good works!! I confirmed it on 6.0R-p2, but I didn't test.
# mkdir /usr/src/sys/dev/myk
# cd /usr/src/sys/dev/myk
# tar xvf mykbsd60x86-8.12.1.3-src.tgz
# make clean all
:
# kldload ./if_myk.ko
# dmesg
:
myk0: <Marvell 88E8050 Gigabit Ethernet Controller, Ver. 8.12.1.3> port 0xa800-0xa8ff mem 0xff720000-0xff723fff irq 17 at device 0.0 on pci4
myk0: Ethernet address: 00:13:20:b4:85:66
# ifconfig myk0
myk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=2b<RXCSUM,TXCSUM,VLAN_MTU,JUMBO_MTU>
ether 00:13:20:b4:85:66
media: Ethernet autoselect
status: no carrier
More information about the freebsd-net
mailing list