Problem with IBM NetXtreme 1000-T GigaEthernet Adapter
Senandung Mendonan
mendonan at gmail.com
Mon Aug 21 09:09:51 UTC 2006
David,
On 8/19/06, David Christensen <davidch at broadcom.com> wrote:
>
> > I tried to use a FE version of the switch (Cisco Catalyst
> > C3750), and a
> > single-port version of the said NIC, with the same results
> > (auto detect
> > fails, and can only live with intermittent forced 100baseTX
> > full-duplex).
>
> There isn't a single port version of the 5704, it must be a different
> controller (maybe the 5703?). Which one is it exactly?
You are right: the single-port version is actually the 5703. Here's
the dmesg output for this particular one:-
pci5: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1100> mem 0xdcff0000-0xdc
ffffff irq 48 at device 1.0 on pci5
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge0: Ethernet address: 00:10:18:16:43:d6
> Do either the
> LOM devices or the add-in boards support remote management (such as
> Serial-over-LAN or IPMI)? If so does disabling the feature change the
> problem?
No idea on this one. Where do I usually disable this -- in the BIOS I presume?
> If you could attach a dump of dmesg that shows the messages from the
> driver that might help too.
Here's the dmesg for the dual-port version:-
pci5: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
0xdcff0000-0xdcffffff irq 48 at device 1.0 on pci5
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:10:18:11:2a:0d
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
0xdcfe0000-0xdcfeffff irq 49 at device 1.1 on pci5
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:10:18:11:2a:0a
Thanks.
>
> > --mendonan
> > "Yang mimpikan secangkir kopi panas dengan selimut.."
> > (Dreaming of a cup of hot coffee, and a blanket..")
> > _______________________________________________
> > freebsd-net at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-net
> > To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
> >
> >
>
>
--
--mendonan
"Yang mimpikan secangkir kopi panas dengan selimut.."
(Dreaming of a cup of hot coffee, and a blanket..")
More information about the freebsd-net
mailing list