inter pro wireless problems

[dima]

I can report even more regression with the most recent version (0409) :(

My 2915 seems to work with RELENG_6_0 only. Not always though. Sometimes I had to reboot to make it associated. Plus the outgoing traffic problem.

I could only associate several times with older versions of RELENG_6. Well, at least the card was able to scan the channels. The scans were not very stable as all the channels where allowed. After typing
# ifconfig iwi0 chanlist 6
the scans became almost stable (more than 80% success). But only occasional association anyway.

I installed the most recent version today. Driver and firmware has initialized as usual. But I can't see my AP at all.

Sorry, I don't have time to debug your patches now. Here comes excerpt from /var/log/messages with debug on if this would help:


iwi0: ieee80211_next_scan: chan 165->1
iwi0: begin active scan in auto mode, scangen 107915
ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 1
iwi0: ieee80211_free_allnodes_locked: free all nodes in scan table
iwi0: ieee80211_next_scan: chan 1->2
iwi0: received probe_resp from 00:11:95:94:63:96 rssi 82
[iwi0:00:11:95:94:63:96] discard probe_resp frame, for off-channel 6
iwi0: received beacon from 00:11:95:94:63:96 rssi 82
[iwi0:00:11:95:94:63:96] discard beacon frame, for off-channel 6
ieee80211_cancel_scan: end active scan
iwi0: iwi0: notify scan done
iwi0: ieee80211_end_scan: no scan candidate
ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 2
iwi0: ieee80211_next_scan: chan 2->3
iwi0: begin active scan in auto mode, scangen 107916
ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 3
iwi0: ieee80211_free_allnodes_locked: free all nodes in scan table
iwi0: ieee80211_next_scan: chan 3->4
iwi0: received probe_resp from 00:11:95:94:63:96 rssi 82
[iwi0:00:11:95:94:63:96] discard probe_resp frame, for off-channel 6
iwi0: received beacon from 00:11:95:94:63:96 rssi 80
[iwi0:00:11:95:94:63:96] discard beacon frame, for off-channel 6
iwi0: ieee80211_cancel_scan: end active scan
iwi0: iwi0: notify scan done
iwi0: ieee80211_end_scan: no scan candidate
ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 4
iwi0: ieee80211_next_scan: chan 4->5
iwi0: begin active scan in auto mode, scangen 107917
ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 5
iwi0: ieee80211_free_allnodes_locked: free all nodes in scan table
iwi0: ieee80211_next_scan: chan 5->6
iwi0: ieee80211_cancel_scan: end active scan
iwi0: iwi0: notify scan done
iwi0: ieee80211_end_scan: no scan candidate
ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 6
iwi0: ieee80211_next_scan: chan 6->7
iwi0: begin active scan in auto mode, scangen 107918
ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 7
iwi0: ieee80211_free_allnodes_locked: free all nodes in scan table
iwi0: ieee80211_next_scan: chan 7->8
received probe_resp from 00:11:95:94:63:96 rssi 82
[iwi0:00:11:95:94:63:96] discard probe_resp frame, for off-channel 6
iwi0: received beacon from 00:11:95:94:63:96 rssi 82
[iwi0:00:11:95:94:63:96] discard beacon frame, for off-channel 6
iwi0: ieee80211_cancel_scan: end active scan
iwi0: iwi0: notify scan done
iwi0: ieee80211_end_scan: no scan candidate