ipfw2 question

[. at babolo.ru]

[ Charset ISO-8859-4 unsupported, converting... ]
> hello,
> i'm solving such a problem:
> router with 3 eth i-faces:
> 
> em0(vlan10)
>                     (vlan1000)fxp0
> em1(vlan11)
> 
> I need to split traffic into two pipes
> pipe1 from vlan10 to vlan1000
> pipe2 from vlan11 to vlan1000
> 
> fxp side supplys traffic to many different subnets
> em0 is trunk to the world networks
> em1 is trunk to the national networks
> so I cannot write these rules in IP level....
> 
> doing it in the following way doesn't works...
> ipfw add pipe1 pass all from any to any via vlan10 in recv vlan1000
> ipfw add pipe1 pass all from any to any via vlan10 out xmit vlan1000
ipfw add pipe 1 ip from any to any out recv vlan10 xmit vlan1000
ipfw add pipe 2 ip from any to any out recv vlan11 xmit vlan1000

or may be better (not exact your ask)

ipfw add pipe 1 ip from any to any in recv vlan10
ipfw add pipe 2 ip from any to any in recv vlan11