FreeBSD 6.0 release,
Paul
reverselogic at gmail.com
Fri Dec 30 18:52:16 PST 2005
I've just installed FreeBSD 6.0 Release yesterday, I've spend the last
two days trying to resolve a networking problem, the problem is this:
when I try and connect to a domain or an IP for that matter, it takes
several minutes for it to connect + receive the content. It doesn't
seem to effect all addresses though, I've had no problems connecting
to ftp://ftp.freebsd.org to download software etc., nor have I had any
problems connecting to domains inside my LAN.
As far as I can tell, it isn't a dns problem because I can ping
without any problems.
I would really appreciate any advice anybody can give me. I've
included some information below which may help diagnose the problem.
Thanks,
Paul
// uname -a
FreeBSD darkstar.home 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov 3
09:36:13 UTC 2005
root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC i386
// ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::210:b5ff:fede:6e8b%rl0 prefixlen 64 scopeid 0x1
inet 192.168.0.102 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:10:b5:de:6e:8b
media: Ethernet autoselect (10baseT/UTP)
status: active
plip0: flags=108851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT>
mtu 1500
inet 0.0.0.0 --> 255.255.255.255 netmask 0xff000000
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
// dmesg | grep rl0
rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0x1000-0x10ff mem
0x40000000-0x400000ff irq 16 at device 8.0 on pci2
miibus0: <MII bus> on rl0
rl0: Ethernet address: 00:10:b5:de:6e:8b
More information about the freebsd-net
mailing list