Routing Wireless cards to the internet

[Staticblackz]

I control the upstream network, it is also running ospf so basically I
need a sample configuration or something along those lines for zebra
or some other ospfd daemon.

On Thu, 15 Jul 2004 16:02:20 -0400, Chuck Swiger <cswiger at mac.com> wrote:
> 
> 
> Staticblackz wrote:
> > Ok I have a setup I have an ethernet port connected to or network and
> > then to the internet and I have 2 atheros card pluged in with hostap
> > mode on so they are access points I need to route those interfaces and
> > the ip subnet behind each one to the internet each interface has a /26
> > bit ( 64 ip ) block and the first availble ip assigned to it assigned
> > to the card I need to route those to the internet....I tried with
> > zebra and ospf but had no luck....I really need some help here
> 
> Have you enabled "sysctl net.inet.ip.forwarding"?
> 
> Does your upstream network connection know about the IP blocks you are setting
> up and have made provisions to route the traffic for them, or should you also
> consider using NAT?
> 
> --
> -Chuck
> 
>