mpd, MS-vpn and growing confusion.

[Michael Bretterklieber]

Hi,

On Wed, 8 Oct 2003, Peter Cornelius wrote:
> My mpd.conf (slightly anonymized ;-)):
>
> vpn:
> 	new -i ng0 vpn vpn0
> 	set iface disable on-demand
> 	set iface addrs 172.16.26.129 172.16.26.127
> 	set iface idle 0
> 	#### disconnect the client after 8 hours
> 	set iface session 28800
> 	set iface route 172.16.26.0/16
> 	set bundle disable multilink
> 	set bundle authname "nt-domain\\user"
> 	set link yes acfcomp protocomp
> 	set link no pap
> 	set link yes chap
if you are using mpd in client mode, then please don't use "yes" or
"enable", just use accept:
set link no pap chap
set link accept chap

> 	set link mtu 1460
> 	#### If remote machine is NT you need this..
> 	set link enable no-orig-auth
> 	set link keep-alive 61 753
> 	set ipcp yes vjcomp
> 	set ipcp ranges 172.16.26.129/16 172.16.26.127/16
> 	#### The five lines below enable Microsoft Point-to-Point encryption
> 	#### (MPPE) using the ng_mppc(8) netgraph node type.
> 	set bundle enable compression
> 	set ccp yes mppc
> 	set ccp yes mpp-e40
> 	set ccp yes mpp-e56
> 	set ccp yes mpp-e128
> 	set bundle enable crypt-reqd
> 	set ccp yes mpp-stateless


> 	set ccp yes mpp-compress
> 	set ccp yes stac
I assume you removed already these two lines.

after trying this can you please send a recent mpd.log?

bye,
--
------------------------------- ----------------------------------
Michael Bretterklieber          - http://www.bretterklieber.com
A-Quadrat Automation GmbH       - http://www.a-quadrat.at
Tel: ++43-(0)3172-41679         - GSM: ++43-(0)699 12861847
------------------------------- ----------------------------------
"...the number of UNIX installations has grown to 10, with more
expected..." - Dennis Ritchie and Ken Thompson, June 1972