Firewall with RFC1918 transfer network
Andre Rein
ar at g23.org
Thu Aug 7 00:56:02 PDT 2003
Hi,
I set up a Firewall for our official Network and use a RFC1918 conform
transfer network to communicate to the router.
Here are my interfaces:
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.55.74 netmask 0xfffffffc broadcast 192.168.55.75
fxp1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet 195.226.65.125 netmask 0xffffffc0 broadcast 195.226.65.127
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.0.0.126 netmask 0xffffff00 broadcast 10.0.0.255
My routing table:
default 192.168.55.73 UGSc 1 822551 fxp0
10/24 link#3 UC 2 0 vr0
10.0.0.65 00:50:ba:fb:dc:13 UHLW 1 42895 vr0 473
10.0.0.254 00:60:b0:6b:08:f3 UHLW 1 1428 vr0 694
127.0.0.1 127.0.0.1 UH 0 2904 lo0
192.168.55.72/30 link#1 UC 3 0 fxp0
192.168.55.73 00:0c:ce:6c:de:53 UHLW 1 0 fxp0 1023
192.168.55.74 00:60:b0:67:e8:01 UHLW 0 2 lo0
192.168.55.75 ff:ff:ff:ff:ff:ff UHLWb 0 4 fxp0
195.226.65.64 ff:ff:ff:ff:ff:ff UHLWb 0 53 fxp1 =>
195.226.65.64/26 link#2 UC 19 0 fxp1
195.226.65.65 00:60:97:b8:7f:89 UHLW 0 48419 fxp1 1098
195.226.65.66 00:60:97:b8:7f:89 UHLW 0 133 fxp1 160
195.226.65.67 00:60:97:b8:7f:89 UHLW 0 6 fxp1 161
....
fxp1 fxp0
|DMZ|--------|Firewall|-------------|Router|-----------|INET|
|
|
| vr0
|
|
-
back network
_
Everything works fine from my official network to the outside and from the
outside to my onet, except the firewall itself.She uses the ip
192.168.55.74 to communicate to the outside.
Is there any way to tell her that she have to use her oip 195.226.65.125
from fxp1?
greetings
Andre Rein
--
"And some greetings from the Toaster"
More information about the freebsd-net
mailing list