tvheadend installed - now what?

[Torfinn Ingolfsen]

On Sat, 15 Feb 2014 13:10:36 +0100
Bernhard Fröhlich <decke at bluelife.at> wrote:

> 
> I am not sure about dvb-c but I had to enable "full mux reception" for the
> adapter too to get it scanning properly.

OK, I changed "full mux reception" from "auto" to "on", then I saved config. Nothing much changed
 - there are no lines in the debug log at the bottom.
I also tried disabling and enabling the interface, which only gives
Feb 15 14:44:40.571 dvb: Adapter "Sony CXD2820R" Disabled
Feb 15 14:44:47.162 dvb: Adapter "Sony CXD2820R" Enabled
in the debug log.

> I know that it can be frustrating if no muxes and services show up because
> it does not tell you anything why it doesn't work. The only thing that
> provides more info is the debug output on the bottom of the webinterface
> which needs to be enabled manually.

Ah, I found "enable debug log output" - thanks!
-- 
Torfinn Ingolfsen <torfinn.ingolfsen at getmail.no>