FreeBSD 8.2-STABLE and Hauppauge PVR-350

[Mike Tancsa]

On 8/23/2011 1:02 PM, Frank Volf wrote:
> 
> Hi,
> 
> Has anybody succeeded in watching TV on a FreeBSD 8.2-STABLE system with
> an Hauppauge PVR-350 card?

I bought mine so long ago. Not sure if its the 250 or 350, but I use it
on RELENG_8 64bit here in Canada on Rogers Cable.

cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf8000000-0xfbffffff irq 16 at
device 0.0 on pci4
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
cxm0: Philips FM1236 tuner
cxm0: SAA7115 rev 1 video decoder
cxm0: MSP4448G-A2 audio decoder
cxm0: IR Remote
cxm0: [GIANT-LOCKED]
cxm0: [ITHREAD]
cxm0: encoder firmware version 0x2050032
cxm0: decoder firmware version 0x2020023

cxm0 at pci0:4:0:0:        class=0x040000 card=0x40000070 chip=0x08034444
rev=0x01 hdr=0x00
    vendor     = 'Conexant Inc (Was: Globespan, ICompression Inc)'
    device     = 'iTVC15/CX23415 MPEG Codec'
    class      = multimedia
    subclass   = video
    bar   [10] = type Prefetchable Memory, range 32, base 0xf8000000,
size 67108864, enabled
    cap 01[44] = powerspec 2  supports D0 D3  current D0

0(cage)# pvr250-setchannel -t 33
0(cage)# dd if=/dev/cxm0 of=/tmp/cnn.mpg count=2000
1997+3 records in
1998+1 records out
1023424 bytes transferred in 1.586878 secs (644929 bytes/sec)
0(cage)# file /tmp/cnn.mpg
cnn.mpg: MPEG sequence, v2, program multiplex
0(cage)#

	---Mike
-- 
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada   http://www.tancsa.com/