Device not configured

[Hansa]

Trying to setup my pvr-500 and come this far.

# pvr250-setchannel 2160.00
ioctl( tfd, BT848_GAUDIO ) failed.: Device not configured
ioctl( tfd, TVTUNER_SETFREQ ) failed.: Device not configured

Can someone tell me whats the next thing to do?

# pciconf -l -v
cxm0 at pci2:8:0:  class=0x040000 card=0xe8070070 chip=0x00164444 rev=0x01
hdr=0x00
    vendor   = 'Conexant Inc (Was: Globespan, ICompression Inc)'
    device   = 'iTVC16/CX23416 MPEG Codec'
    class    = multimedia
    subclass = video
cxm1 at pci2:9:0:  class=0x040000 card=0xe8170070 chip=0x00164444 rev=0x01
hdr=0x00
    vendor   = 'Conexant Inc (Was: Globespan, ICompression Inc)'
    device   = 'iTVC16/CX23416 MPEG Codec'
    class    = multimedia
    subclass = video

# dmesg
cxm0: <Conexant iTVC16 MPEG Coder> mem 0xdc000000-0xdfffffff irq 16 at
device 8.0 on pci2
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
second(radio) tuner 101
tuner code 91
tuner_type = 3
cxm0: Philips FQ1216ME MK3 tuner
<2>cxm 0-0000: loaded /lib/modules/v4l-cx25840.fw firmware (14264 bytes)
<2>cxm debug 0-0000: decoder set input (0)
<2>cxm debug 0-0000: now setting Tuner input
<2>cxm debug 0-0000: set audio input (0)
<2>cxm debug 0-0000: set audio input (0)
cxm0: Eeprom PAL
<2>tda 0-0000: switching to v4l2
<2>tda 0-0000: configure for: PAL-BG
<2>tda 0-0000: writing: b=0xd4 c=0x70 e=0x09
<2>tda 0-0000: read: 0xce
<2>tda 0-0000:   after power on : no
<2>tda 0-0000:   afc            : -187.5 kHz [min]
<2>tda 0-0000:   fmif level     : low
<2>tda 0-0000:   afc window     : in
<2>tda 0-0000:   vfi level      : high
<2>cxm 0-0000: Video signal:              not present
<2>cxm 0-0000: Detected format:           NTSC-M
<2>cxm 0-0000: Detected audio mode:       forced mode
<2>cxm 0-0000: Detected audio standard:   forced audio standard
<2>cxm 0-0000: Audio muted:               no
<2>cxm 0-0000: Audio microcontroller:     running
<2>cxm 0-0000: Configured audio standard: A2-BG
<2>cxm 0-0000: Configured audio mode:     undefined
<2>cxm 0-0000: Specified standard:        PAL-BDGHI
<2>cxm 0-0000: Specified input:           Tuner
<2>cxm 0-0000: Specified audio input:     Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode:      stereo
<2>cxm 0-0000: Selected 65 MHz format:    system DK
<2>cxm 0-0000: Selected 45 MHz format:    chroma
cxm0: [GIANT-LOCKED]
cxm0: encoder firmware version 0x2050032
cxm1: <Conexant iTVC16 MPEG Coder> mem 0xd8000000-0xdbffffff irq 17 at
device 9.0 on pci2
cxm_iic1: <Conexant iTVC15 / iTVC16 I2C controller> on cxm1
iicbb1: <I2C bit-banging driver> on cxm_iic1
iicbus1: <Philips I2C bus> on iicbb1 master-only
second(radio) tuner 101
tuner code 91
tuner_type = 3
cxm1: Philips FQ1216ME MK3 tuner
<2>cxm 0-0000: loaded /lib/modules/v4l-cx25840.fw firmware (14264 bytes)
<2>cxm debug 0-0000: decoder set input (0)
<2>cxm debug 0-0000: now setting Tuner input
<2>cxm debug 0-0000: set audio input (0)
<2>cxm debug 0-0000: set audio input (0)
cxm1: Eeprom PAL
<2>tda 0-0000: switching to v4l2
<2>tda 0-0000: configure for: PAL-BG
<2>tda 0-0000: writing: b=0xd4 c=0x70 e=0x09
<2>tda 0-0000: read: 0x4e
<2>tda 0-0000:   after power on : no
<2>tda 0-0000:   afc            : -187.5 kHz [min]
<2>tda 0-0000:   fmif level     : low
<2>tda 0-0000:   afc window     : in
<2>tda 0-0000:   vfi level      : low
<2>cxm 0-0000: Video signal:              not present
<2>cxm 0-0000: Detected format:           NTSC-M
<2>cxm 0-0000: Detected audio mode:       forced mode
<2>cxm 0-0000: Detected audio standard:   forced audio standard
<2>cxm 0-0000: Audio muted:               no
<2>cxm 0-0000: Audio microcontroller:     running
<2>cxm 0-0000: Configured audio standard: A2-BG
<2>cxm 0-0000: Configured audio mode:     undefined
<2>cxm 0-0000: Specified standard:        PAL-BDGHI
<2>cxm 0-0000: Specified input:           Tuner
<2>cxm 0-0000: Specified audio input:     Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode:      stereo
<2>cxm 0-0000: Selected 65 MHz format:    system DK
<2>cxm 0-0000: Selected 45 MHz format:    chroma
cxm1: [GIANT-LOCKED]
cxm1: encoder firmware version 0x2050032
device cxm0 opened
device cxm0 opened
device cxm0 opened
device cxm0 opened
<2>cxm 0-0000: Video signal:              present
<2>cxm 0-0000: Detected format:           PAL-BDGHI
<2>cxm 0-0000: Detected audio mode:       forced mode
<2>cxm 0-0000: Detected audio standard:   forced audio standard
<2>cxm 0-0000: Audio muted:               no
<2>cxm 0-0000: Audio microcontroller:     running
<2>cxm 0-0000: Configured audio standard: A2-BG
<2>cxm 0-0000: Configured audio mode:     undefined
<2>cxm 0-0000: Specified standard:        PAL-BDGHI
<2>cxm 0-0000: Specified input:           Tuner
<2>cxm 0-0000: Specified audio input:     Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode:      stereo
<2>cxm 0-0000: Selected 65 MHz format:    system DK
<2>cxm 0-0000: Selected 45 MHz format:    chroma
device cxm0 opened
<2>cxm 0-0000: Video signal:              present
<2>cxm 0-0000: Detected format:           PAL-BDGHI
<2>cxm 0-0000: Detected audio mode:       forced mode
<2>cxm 0-0000: Detected audio standard:   forced audio standard
<2>cxm 0-0000: Audio muted:               no
<2>cxm 0-0000: Audio microcontroller:     running
<2>cxm 0-0000: Configured audio standard: A2-BG
<2>cxm 0-0000: Configured audio mode:     undefined
<2>cxm 0-0000: Specified standard:        PAL-BDGHI
<2>cxm 0-0000: Specified input:           Tuner
<2>cxm 0-0000: Specified audio input:     Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode:      stereo
<2>cxm 0-0000: Selected 65 MHz format:    system DK
<2>cxm 0-0000: Selected 45 MHz format:    chroma
device cxm0 opened
device cxm0 opened

Best regards,

Hansa