Please don't tell me this is a "WIntuner" (my winmodem memories
keep hunting me...:-)
Mark Jayson Alvarez
markjayson.alvarez at gmail.com
Tue Nov 7 14:13:48 UTC 2006
Hi,
just purchased an ultra-cheap PCI TV Tuner, Leadtek WinFast TV2000 XP
RM and couldn't make it to work.
There were only 17 matches when you search the freebsd-multimedia
archive for "winfast"... been reading it over and over again and I
couldn't get any closer to my goal.
The box:
FreeBSD 6.2-PRERELEASE
Sysctl:
hw.bt848.slow_msp_audio: -1
hw.bt848.format: 0
hw.bt848.reverse_mute: -1
hw.bt848.tuner: 15
hw.bt848.card: 14
I tried using kbtv:
Hardware Info:
Bktr module: Loaded
Capture chip: BrookTree 878
Card name: Leadtek Winfast TV 2000 <sysctl:14>
-huh!? I thought it was 15 says bktr (4)
Tuner type: LG TP18PSB12P PAL <sysctl:15> - as
according to this:
http://lists.freebsd.org/mailman/htdig/freebsd-multimedia/2005-August/002521.html
I'm leaving here in the Philippines
The tv tuner's surface doesn't really say anything about it's tuner
type. It just have a sticker with "Winfast TV2000 XP RM" and "NTSC"
selected on the checkbox..
The chipset is definitely a Conexant Fusion 878.
I tried xawtv... played with different values to no avail.
$xawtv -hwscan
This is xawtv-3.95, running on FreeBSD/i386 (6.2-PRERELEASE)
looking for available devices
port 57-88
type : Xvideo, image scaler
name : NV Video Blitter
/dev/bktr0: OK [ -device /dev/bktr0 ]
type : bktr
flags: overlay capture tuner
However, upon launching xawtv, I got these:
$xawtv
This is xawtv-3.95, running on FreeBSD/i386 (6.2-PRERELEASE)
Warning: Cannot convert string
"-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
Xlib: extension "GLX" missing on display ":0.0".
I removed bktr_load="YES" from /boot/loader.conf, rebooted the machine
sysctl were also gone it was detected as:
Leadtek Winfast TV 2000, Philips FR1236 NTSC FM tuner.
Perhaps you can get something from the verbose dmesg:
bktr_mem: memory holder loaded
pci0: driver added
found-> vendor=0x8086, dev=0x27da, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=23
pci0:31:3: reprobing on driver added
pci1: driver added
found-> vendor=0x109e, dev=0x036e, revid=0x11
bus=1, slot=1, func=0
class=04-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=21
powerspec 2 supports D0 D3 current D0
pci1:1:0: reprobing on driver added
bktr0: <BrookTree 878> mem 0xbfffe000-0xbfffefff irq 21 at device 1.0 on pci1
bktr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xbfffe000
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 59
bktr0: [GIANT-LOCKED]
brooktree0: PCI bus latency is 64.
bktr0: buffer size 3555328, addr 0x1a000000
bktr0: GPIO is 0x003ff502
bktr0: subsystem 0x107d 0x6609
bktr0: Leadtek Winfast TV 2000, Philips FR1236 NTSC FM tuner.
found-> vendor=0x109e, dev=0x0878, revid=0x11
bus=1, slot=1, func=1
class=04-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=21
powerspec 2 supports D0 D3 current D0
pci1:1:1: reprobing on driver added
pci2: driver added
pci3: driver added
pci4: driver added
found-> vendor=0x10de, dev=0x0160, revid=0xa1
bus=4, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci4:0:0: reprobing on driver added
tun0: bpf attached
Is this some sort of like winmodem issue?? I noticed that a lot people
are complaining about not making their tv tuner to work. Any idea why?
Thanks
More information about the freebsd-multimedia
mailing list