CURRENT Intel ICH5 (82801EB) errors

[Andrew Bliznak]

On 11/17/05, Pyun YongHyeon <pyunyh at gmail.com> wrote:
> On Thu, Nov 17, 2005 at 10:49:20AM +0300, Andrew Bliznak wrote:
>  > On 11/17/05, Pyun YongHyeon <pyunyh at gmail.com> wrote:
>  > > On Wed, Nov 16, 2005 at 01:53:25PM +0300, Andrew Bliznak wrote:
>  > >  > Just for information
>  > >  >
>  > >  > FreeBSD beef.xxxxxx.com 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Tue Nov 15
>  > >  > 13:03:12 EET 2005
>  > >  > andrew at pyvo.xxxxxx.com:/usr/home/andrew/C/obj/usr/home/andrew/C/src/sys/GENERIC
>  > >  >  i386
>  > >  >
>  > >  > from dmesg:
>  > >  > ---
>  > >  > Nov 15 17:02:31 beef kernel: pcm0: <Intel ICH5 (82801EB)> port
>  > >  > 0xd000-0xd0ff,0xe100-0xe13f mem
>  > >  > 0xf8201000-0xf82011ff,0xf8202000-0xf82020ff irq 17 at device 31.5 on
>  > >  > pci0
>  > >  > Nov 15 17:02:31 beef kernel: pcm0: unable to initialize the card
>  > >  > Nov 15 17:02:31 beef kernel: device_attach: pcm0 attach returned 6
>  > >
>  > > How about attached patch?
>  >
>  > No luck, rebuild module and reload
>  > ---
>  > Nov 17 09:37:50 beef kernel: pcm0: <Intel ICH5 (82801EB)> port
>  > 0xd000-0xd0ff,0xe100-0xe13f mem
>  > 0xf8201000-0xf82011ff,0xf8202000-0xf82020ff irq 17 at device 31.5 on
>  > pci0
>  > Nov 17 09:37:50 beef kernel: pcm0: primary codec not ready!pcm0:
>  > unable to initialize the card
>  > Nov 17 09:37:50 beef kernel: device_attach: pcm0 attach returned 6
>  > ---
>  >
>  > Will try late with reboot, thanks anyway.
>  >
>
> Hmm, then try this one. It just ignores PCR bit.

Rebuild, reload. This time much better, and I hear sound from speakers
( debug.bootverbose 0->1)
---
Nov 17 11:07:08 beef kernel: pci0: driver added
Nov 17 11:07:08 beef kernel: found->    vendor=0x8086, dev=0x24d3, revid=0x02
Nov 17 11:07:08 beef kernel: bus=0, slot=31, func=3
Nov 17 11:07:08 beef kernel: class=0c-05-00, hdrtype=0x00, mfdev=0
Nov 17 11:07:08 beef kernel: cmdreg=0x0001, statreg=0x0280,
cachelnsz=0 (dwords)Nov 17 11:07:08 beef kernel: lattimer=0x00 (0 ns),
mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
Nov 17 11:07:08 beef kernel: intpin=b, irq=17
Nov 17 11:07:08 beef kernel: pci0:31:3: reprobing on driver added
Nov 17 11:07:08 beef kernel: found->    vendor=0x8086, dev=0x24d5, revid=0x02
Nov 17 11:07:08 beef kernel: bus=0, slot=31, func=5
Nov 17 11:07:08 beef kernel: class=04-01-00, hdrtype=0x00, mfdev=0
Nov 17 11:07:08 beef kernel: cmdreg=0x0007, statreg=0x0290,
cachelnsz=0 (dwords)Nov 17 11:07:08 beef kernel: lattimer=0x00 (0 ns),
mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
Nov 17 11:07:08 beef kernel: intpin=b, irq=17
Nov 17 11:07:08 beef kernel: powerspec 2  supports D0 D3  current D0
Nov 17 11:07:08 beef kernel: pci0:31:5: reprobing on driver added
Nov 17 11:07:08 beef kernel: pcm0: <Intel ICH5 (82801EB)> port
0xd000-0xd0ff,0xe100-0xe13f mem
0xf8201000-0xf82011ff,0xf8202000-0xf82020ff irq 17 at device 31.5 on
pci0
Nov 17 11:07:08 beef kernel: pcm0: [MPSAFE]
Nov 17 11:07:08 beef kernel: pcm0: primary codec not ready!
Nov 17 11:07:08 beef kernel: pcm0: <C-Media Electronics CMI9739 AC97
Codec (id = 0x434d4961)>
Nov 17 11:07:08 beef kernel: pcm0: Soft PCM volume
Nov 17 11:07:08 beef kernel: pcm0: Codec features 5 bit master volume,
no 3D Stereo Enhancement
Nov 17 11:07:08 beef kernel: pcm0: Primary codec extended features
double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC,
reserved 4
Nov 17 11:07:08 beef kernel: pcm0: ac97 codec dac ready count: 0
Nov 17 11:07:08 beef kernel: pcm0: sndbuf_setmap 1e1cd000, 4000;
0xdee25000 -> 1e1cd000
Nov 17 11:07:08 beef kernel: pcm0: sndbuf_setmap 1d934000, 4000;
0xdee29000 -> 1d934000
Nov 17 11:07:08 beef kernel: pcm0: measured ac97 link rate at 47999
Hz, will use 48000 Hz

> --
> Regards,
> Pyun YongHyeon
>
>
>