PCTV problem

[S.N.Grigoriev]

Hi,

I've recently purchased a Pinnacle PCTV Pro PCI card.
In accordance with the FreeBSD handbook this card is
supported by the bktr(4) driver. But all my attempts
to use it have been unsuccessful: I've always got
something like colorized snow on the top part of the
program's window.

I would like to know if there is a way to fix my problem.

My configuration is:

FreeBSD v.6.0 RELEASE (amd64)
nVidia nForce4-based motherborad
3dfx VooDoo4 4500 PCI video card

Kernel config:

options		BKTR_NEW_MSP34XX_DRIVER
options		BKTR_USE_FREEBSD_SMBUS
options		BKTR_USE_PLL
device		smbus
device		iicbus
device		iicbb
device		ic
device		iic
device		iicsmb
device		smb
device		bktr
------------------------------------

dmesg info:

bktr0: <BrookTree 878> mem 0xe8001000-0xe8001fff irq 19 at device 7.0 on pci1
bktr0: [GIANT-LOCKED]
smbus0: <System Management Bus> on bktr0
smb0: <SMBus generic I/O> on smbus0
iicbb0: <I2C bit-banging driver> on bktr0
iicbus0: <Philips I2C bus> on iicbb0 master-only
ic0 on iicbus0
iic0: <I2C generic I/O> on iicbus0
iicsmb0: <SMBus over I2C bridge> on iicbus0
smbus1: <System Management Bus> on iicsmb0
smb1: <SMBus generic I/O> on smbus1
bktr0: MT2032: Companycode=3cbf Part=5a Revision=5a
bktr0: MT2032 not found or unknown type
bktr0: Detected a MSP3400 at -@0 at 0x80
bktr0: Pinnacle/Miro TV, msp3400c stereo.
------------------------------------------------

I've tried to use this configuration with mplayer
and xawtv (frequency table: 'russia', TV norm: SECAM/SECAMD).
Fxtv always crashes my system with page fault errors.

Regards,
Serguey.