PVR-150?

[Michael Haro]

I got the PVR150 card, but I could use a few pointers as to what to look
at to get it working with 5.4-rc2.

I installed the multimedia/pvr250 port and when I load the device, dmesg
reports the following:

cxm0: <Conexant iTVC16 MPEG Coder> mem 0xc8000000-0xcbffffff irq 10 at
device 13.0 on pci0
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
cxm0: LG Innotek TAPC-H701F tuner
cxm0: could not initialize video decoder
iicbus0: detached
iicbb0: detached
cxm_iic0: detached
device_attach: cxm0 attach returned 6

pciconf -lv reports:

cxm0 at pci0:13:0: class=0x040000 card=0x80030070 chip=0x00164444 rev=0x01 hdr=0x00
    vendor   = 'Conexant Inc (Was: Globespan, ICompression Inc)'
    device   = 'iTVC16/CX23416 MPEG Codec'
    class    = multimedia
    subclass = video


Any tips as to which files I need to modify, or how to figure what I need
to do to make this card work with the cxm driver?

Thanks,

Michael

On Thu, Apr 14, 2005 at 09:54:15PM -0700, Julian Elischer wrote:
> Michael Haro wrote:
> >Is the PVR-150 supported by any FreeBSD drivers?
> >
> >Thanks,
> >
> >Michael
> 
> it should be possible to support it with the PVR240 driver.
> According to an article I just read it is basically the same but with one 
> chip different. But probabyl not out of the box..
>