no sound with bktr driver
Eddie Dandrades
normal1 at gmail.com
Mon Sep 27 18:51:14 PDT 2004
I had the same issue with a Phillips FM Tuner Card and never got audio
out of it so I gave up :( - I truly hope you get a real answer and a
final solution.
Cheers!
On Mon, 27 Sep 2004 18:39:06 -0700, Scott Gasch <scott at wannabe.guru.org> wrote:
> Hello,
>
> Still no luck getting audio on this device. I read bktr_audio.c /
> bktr_carc.c and tried building a kernel with BKTR_OVERRIDE_MSP=1 with
> no luck (trying to bypass the audio mux code). Looking at the card
> (and knowing nothing about it) I do not see any obvious MSP or DPL
> looking audio chips. I do see an Altera FPGA, a Conexant Fusion 878A
> capture chip, and a VTech Kfir chip which I believe is an MPEG
> encoder.
>
> FWIW here is the verbose dmesg output (with me not force/overriding
> anything):
>
> bktr0: <BrookTree 878> mem 0xec100000-0xec100fff irq 17 at device 6.0
> on pci0
> brooktree0: PCI bus latency is 32.
> bktr0: buffer size 3555328, addr 0x5000000
> bktr0: GPIO is 0x00ffffff
> bktr0: subsystem 0x0070 0x4500
> bktr0: Hauppauge Model 45231 D323
> bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner.
> bktr0: msp34xx: init: chip=MSP34255?-?31, has NICAM support
> pci0: <multimedia> at device 6.1 (no driver attached)
>
> And here fxtv's -debug startup output:
>
> DETECTED CAPTURE CARD(S) [DRIVER PROBES]:
> bktr0: <BrookTree 878> mem 0xec100000-0xec100fff irq 17 at device
> 6.0 on pci0
> brooktree0: PCI bus latency is 32.
> bktr0: buffer size 3555328, addr 0x5000000
> bktr0: GPIO is 0x00ffffff
> bktr0: subsystem 0x0070 0x4500
> bktr0: Hauppauge Model 45231 D323
> bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner.
> bktr0: msp34xx: init: chip=MSP34255?-?31, has NICAM support
> bktr0: msp3400: thread started
> ata0-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
>
> SYSCTL MIB VALUES:
> kern.version: FreeBSD 5.2.1-RELEASE-p10 #7: Mon Sep 27 19:18:46
> PDT 2004
> root at jukebox.smg:/usr/src/sys/i386/compile/JUKEBOX
>
> hw.bt848.card: -1
> hw.bt848.tuner: -1
> hw.bt848.reverse_mute: -1
> hw.bt848.format: -1
> hw.bt848.slow_msp_audio: -1
> hw.bt848.stereo_once: 0
> hw.bt848.amsound: 0
> hw.bt848.dolby: 0
>
> TUNER SIGNATURE (0x01 - 0xff):
> 00 00 00 00 00 00 00 00 00 00 ff 00 02 00 00 00
>
> TUNER I2C DEVICES FOUND AT:
> 0xa0, 0xa2, 0xa4, 0xa6, 0xa8, 0xaa, 0xac, 0xae, 0xc2
>
> CAPTURE CARD EEPROM CONTENTS:
> Read 256 EEPROM bytes (0x00 - 0xff)
> 84 12 00 00 05 50 0e 7f 08 17 23 af b0 93 34 91
> 00 00 00 00 05 84 0a 00 01 01 20 77 00 40 20 fc
> 40 00 74 02 01 8a 03 79 4a 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 45 00 00 70
> 84 12 00 00 05 50 0e 7f 08 17 23 af b0 93 34 91
> 00 00 00 00 05 84 0a 00 01 01 20 77 00 40 20 fc
> 40 00 74 02 01 8a 03 79 4a 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 45 00 00 70
>
> SUPPORTED FREQUENCY SETS:
> 1 nabcst
> 2 cableirc
> 3 cablehrc
> 4 weurope
> 5 jpnbcst
> 6 jpncable
> 7 xussr
> 8 australia
> 9 france
>
> Supported RGB Capture Pixel Formats:
> bpp Bpp RGB Masks Swap
> --- --- ---------------------------- ----
> 15 2 00007c00, 000003e0, 0000001f NB
> 16 2 0000f800, 000007e0, 0000001f NB
> 24 3 00ff0000, 0000ff00, 000000ff B
> 24 4 00ff0000, 0000ff00, 000000ff NBWb
>
> Supported YUV Capture Pixel Formats:
> YUVSize HSamp VSamp Pack CompOrder T->B L->R YTrans
> ------- ----- ----- ------ --------- ---- ---- ------
> 8,8,8 1,2,2 1,1,1 PLANAR YUV Y Y N
> 8,8,8 1,2,2 1,1,1 PACKED YUYV Y Y N
> 8,8,8 1,2,2 1,2,2 PLANAR YUV Y Y N
>
> I'm out of ideas at this point. Any advice greatly appreciated.
>
> Scott
>
> On Mon, Sep 27, 2004 at 09:51:26PM +0200, Flemming Jacobsen wrote:
> ] Scott Gasch wrote:
> ] > I'm trying to get a Hauppauge WinTV PVR 45xxx card working under
> ] > FreeBSD 5.2.1. With the bktr driver I am able to get video but no
> ] > sound.
> ] >
> ] > [ ... ]
> ] > bktr0: <BrookTree 878> mem 0xec100000-0xec100fff irq 17 at device 6.0 on pci0
> ] > bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner.
> ] > pci0: <multimedia> at device 6.1 (no driver attached)
> ]
> ] I think I have the same card at home (being at SANE2004 I can't
> ] check).
> ] Try selecting something like "Audio internal" from the fxtv menu.
> ]
> ]
> ] Hyg'
> ] Flemming
> ]
> ] --
> ] Flemming Jacobsen Email: fj at batmule.dk
> ] ---=== If speed kills, Windows users may live forever. ===---
>
> --
> Scott Gasch
> scott at wannabe.guru.org
> _______________________________________________
> freebsd-multimedia at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
> To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe at freebsd.org"
>
--
-gabriel
More information about the freebsd-multimedia
mailing list