Mono Develop 5.0.1_1 Not Launching?

Ivan Radovanovic radovanovic at gmail.com
Sun Aug 9 08:37:59 UTC 2015 

On 08/09/15 10:17, Russell Haley napisa:
> The REAL error is this:
> [ERROR] FATAL UNHANDLED EXCEPTION: System.IO.IOException: persistent
> kevent() error, error code = '22'
>    at System.IO.KqueueMonitor.Monitor () [0x00000] in <filename unknown>:0
>    at System.IO.KqueueMonitor.DoMonitor () [0x00000] in <filename unknown>:0
>
> I'm still stuck on this. I have no idea where KqueueMonitor is being called
> from. Any input would be helpful.
>
> Thanks,
>
> Russ
>
> On Mon, Aug 3, 2015 at 11:41 PM, Russell Haley <russ.haley at gmail.com> wrote:
>
>> Okay, last post, I promise. I need some sleep!
>>
>> So what I reported previously is not a real issue
>>
>> ERROR [2015-08-03 22:24:30Z]: GLib-Critical: Source ID 2077 was not found
>> when attempting to remove it
>> Stack trace:
>>     at GLib.Source.g_source_remove(UInt32 )
>>     at GLib.Source.Remove(UInt32 tag)
>>     at GLib.Timeout+TimeoutProxy.Dispose(Boolean disposing)
>>     at GLib.Timeout+TimeoutProxy.Finalize()
>>
>> Is only a warning apparently??? Anyway, are we running an old version of
>> gtk-sharp? Seems to be updated here:
>>
>> https://github.com/mono/gtk-sharp/commit/7ea0c4afaf405df2dfc5a42e098e9023ecc1c51c
>>
>> The REAL error is this:
>> [ERROR] FATAL UNHANDLED EXCEPTION: System.IO.IOException: persistent
>> kevent() error, error code = '22'
>>    at System.IO.KqueueMonitor.Monitor () [0x00000] in <filename unknown>:0
>>    at System.IO.KqueueMonitor.DoMonitor () [0x00000] in <filename unknown>:0
>>
>> I drilled into KqueueMonitor and found that in the Monitor() routine it
>> throws this exception if it retries three times with no success. '22' is
>> called fromMarshall.GetLastWin32Error, so it could be:
>>
>> 0x00000016 ERROR_BAD_COMMAND
>>
>> or
>>
>> 0x00000022 ERROR_WRONG_DISK
>>
>> Depending how you interpret '22'. :D
>>
>>
>> Once again, hope I'm helping more than hindering.
>>
>> Goodnight,
>>
>> Russ
>>
>> On Mon, Aug 3, 2015 at 10:30 PM, Russell Haley <russ.haley at gmail.com>
>> wrote:
>>
>>> Ha! So I worked through it and I installed the following ports:
>>>
>>> p5-XML-LibXML:
>>> cd /usr/ports/textproc/p5-XML-LibXML/ && make install clean
>>>
>>> gtk-sharp20 -> gtk-sharp30 doesn't work! oops
>>> /ports/x11-toolkits/gtk-sharp20/ && make install clean
>>>
>>> gnome-sharp20
>>> cd /usr/ports/x11-toolkits/gnome-sharp20/ && make install clean  -> had
>>> to run REinstall for this one???
>>>
>>> and finished the build, but I get a runtime error. When running
>>> monodevelop --no-redirect I get this:
>>>
>>> INFO [2015-08-03 22:24:26Z]: Add-in loaded: MonoDevelop.CBinding
>>> INFO [2015-08-03 22:24:26Z]:
>>> [MonoDevelop.DesignerSupport.Toolbox.ExternalLoader] Add-in loaded:
>>> MonoDevelop.CBinding
>>> INFO [2015-08-03 22:24:26Z]: Add-in loaded: MonoDevelop.GtkCore
>>> INFO [2015-08-03 22:24:26Z]:
>>> [MonoDevelop.DesignerSupport.Toolbox.ExternalLoader] Add-in loaded:
>>> MonoDevelop.GtkCore
>>> ERROR [2015-08-03 22:24:26Z]: GLib-Critical: Source ID 1927 was not found
>>> when attempting to remove it
>>> Stack trace:
>>>     at GLib.Source.g_source_remove(UInt32 )
>>>     at GLib.Source.Remove(UInt32 tag)
>>>     at GLib.Timeout+TimeoutProxy.Dispose(Boolean disposing)
>>>     at GLib.Timeout+TimeoutProxy.Finalize()
>>> ERROR [2015-08-03 22:24:26Z]: GLib-Critical: Source ID 1924 was not found
>>> when attempting to remove it
>>> Stack trace:
>>>     at GLib.Source.g_source_remove(UInt32 )
>>>     at GLib.Source.Remove(UInt32 tag)
>>>     at GLib.Timeout+TimeoutProxy.Dispose(Boolean disposing)
>>>     at GLib.Timeout+TimeoutProxy.Finalize()
>>> ERROR [2015-08-03 22:24:26Z]: GLib-Critical: Source ID 1923 was not found
>>> when attempting to remove it
>>>
>>> Ad-nausium. NOW I am out of my depth...
>>>
>>>
>>> Yay, I'm helping! :D
>>>
>>> Russ
>>>
>>>
>>> On Mon, Aug 3, 2015 at 9:35 PM, Russell Haley <russ.haley at gmail.com>
>>> wrote:
>>>
>>>> Okay, so this is where I am at:
>>>>
>>>> 1) built mono from /usr/ports/lang/mono (version 4.0.1.28)
>>>> 2) downloaded current Monodevelop from github.
>>>> 3) Tried to build, but ran into the following issues:
>>>> a) *%-recursive: $(CONFIG_MAKE)* -> Doesn't work with make. I called
>>>> gmake and got past this.
>>>> b) *DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"* -> This
>>>> fails in tcsh. Not sure what the repalcement is. Hard coded path got me
>>>> past this.
>>>> c) Monodevelop/main contains a (generated?) Makefile has a target called
>>>> restore-packages which has the following line: *nuget restore* (or
>>>> something like that) It fails for two reasons.
>>>> i) it needs to be replaces with *mono
>>>> /usr/home/rhaley/git/monodevelop/main/external/nuget-binary/NuGet.exe
>>>> restore*
>>>> ii) *mozroots --import --sync* -> NuGet.exe needs this run or download
>>>> fail with WARNING: Error: SendFailure (Error writing headers). Not sure
>>>> what it does
>>>>
>>>> Now I am getting build errors and i think it is because I don't have
>>>> mono-addins (gtk failing).
>>>>
>>>> When I try to run mono-addins from /usr/ports/devel/mono-addins, I get
>>>> the following error:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> *make install clean===>  Installing for mono-addins-1.1===>
>>>> mono-addins-1.1 depends on executable: mono - found===>   mono-addins-1.1
>>>> depends on file: /usr/local/libdata/pkgconfig/gtk-sharp-2.0.pc - not
>>>> found===>   mono-addins-1.1 depends on file:
>>>> /usr/local/libdata/pkgconfig/gtk-sharp-2.0.pc - not found*** Error code
>>>> 1Stop.make[1]: stopped in /usr/ports/devel/mono-addins*** Error code
>>>> 1Stop.make: stopped in /usr/ports/devel/mono-addins*
>>>>
>>>> Few! okay, that's as far as I got. Why is the mono-addins port not
>>>> fetching dependencies?
>>>>
>>>> Thanks,
>>>>
>>>> Russ
>>>>
>>>> On Mon, Aug 3, 2015 at 6:45 PM, Russell Haley <russ.haley at gmail.com>
>>>> wrote:
>>>>
>>>>> Very exciting. I would like to be involved if you need a tester. I
>>>>> just read about creating ports in BSD Journal and I started looking
>>>>> into why make was failing on the source from the github repository
>>>>> (some bash specific stuff, NuGet gets called incorrectly and fails
>>>>> etc) but that's as far as I got.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Russell
>>>>>
>>>>> On Mon, Aug 3, 2015 at 4:11 PM, Tony Narlock <tony at git-pull.com> wrote:
>>>>>> Thank you for posting this. I also am getting the same experience as
>>>>> you and
>>>>>> others on the thread.
>>>>>>
>>>>>> I made a bugzilla issue at
>>>>>> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=202067 and linked
>>>>> to the
>>>>>> thread here as well.
>>>>>>
>>>>>> Also, there is a patch to update monodevelop (to 5.5) at
>>>>>> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=194915. This was
>>>>> last
>>>>>> modified 2014-12-19 12:38 PST. Unfortunately no one caught it.
>>>>> Sergey, I am
>>>>>> CC'ing you on this.
>>>>>>
>>>>>> It being almost 9 months since, I think we may as well make a patch
>>>>> for the
>>>>>> newest monodevelop if possible (latest release as of August 3rd, 2015
>>>>> is
>>>>>> 5.9.5.5)
>>>>>>
>>>>>> On Wed, Jul 29, 2015 at 1:16 AM, Russell Haley <russ.haley at gmail.com>
>>>>> wrote:
>>>>>>>
>>>>>>> Hi there,
>>>>>>>
>>>>>>> I am trying to run Monodevelop on PC-BSD 10.1 release 25. First,
>>>>> ports
>>>>>>> wouldn't build any of the dependency files and then when I finally
>>>>> got
>>>>>>> it installed through the AppCafe using a binary, the application
>>>>> fails
>>>>>>> to start. There is no error or pop-up. It just fails to start.
>>>>>>>
>>>>>>> I'd really like to debug this and fix the issue. Is there any logging
>>>>>>> or any way I can figure out what the next step in debuggin this issue
>>>>>>> is?
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> Russ
>>>>>>> _______________________________________________
>>>>>>> freebsd-mono at freebsd.org mailing list
>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-mono
>>>>>>> To unsubscribe, send any mail to "
>>>>> freebsd-mono-unsubscribe at freebsd.org"
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
> _______________________________________________
> freebsd-mono at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mono
> To unsubscribe, send any mail to "freebsd-mono-unsubscribe at freebsd.org"
>

Hi Russ,

KqueueMonitor is class used to implement FileSystemWatcher using kqueue, 
so you should really look for calls of FileSystemWatcher methods.


(KqueueMonitor was relatively broken in 3.x but I patched it for 
FreeBSD, unfortunately I didn't have time to look at 4.x yet, so I don't 
have any clue if my code is still there - it was kinda suboptimal but it 
was working properly).

Kind regards,
Ivan

More information about the freebsd-mono mailing list