associated to AP (WEP mode) && no IP addr via DHCP
Дмитрий Колосов
ivakras1 at gmail.com
Sat Mar 7 10:35:03 PST 2009
On Суббота 07 марта 2009 16:38:05 Matthias Apitz wrote:
> El día Friday, March 06, 2009 a las 04:10:25PM -0800, Sam Leffler escribió:
>
> > What does athstats show for crypto errors? If the WEP-encrypted packet
> > is dropped by the h/w then you will see the counter bump.
> >
> > Based on the above you are not running HEAD; if you can try that I can
> > help more.
>
> Sam, when I've built the HEAD kernel last year in August for my EeePC,
> my hints file says about:
>
> ...
> Sam's patch for HAL:
>
> # cd /usr/src/sys/contrib/dev
> # mv ath ath.RELENG_7
> # tar xzf ath_hal-20080528.tgz
> # mv ath_hal-20080528 ath
>
> Is this patch still required for RELENG_7, or already in the sourcen whe
> I now do 'cvs update -rRELENG_7 src/sys'? It seems so from the age of
> the files below /usr/src/sys/contrib/dev/ath after cvs update...
>
> Thx
>
> matthias
>
Just use mad-wifi hal to replace a system one. It worked fine to me.
After replacing /usr/src/sys/contrib/dev/ath/ with content of madwifi-hal-0.10.5.6-current.tar.gz/hal (and building a new kernel) my ath0
{
ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
ath0: <Atheros 5424/2424> mem 0xf4000000-0xf400ffff irq 16 at device 0.0 on pci2
ath0 at pci0:2:0:0: class=0x020000 card=0x04281468 chip=0x001c168c rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'AR5006 family 802.11abg Wireless NIC'
class = network
subclass = ethernet
}
working very fast - burst, dturbo, Atheros Fast Frames modes, and other atheros modes supported wery well! But hardware led not blinking (under u-know-what OS it is blinking when tx or rx is active).
More information about the freebsd-mobile
mailing list