ThinkPad X200 (7454-CTO)

Sat Jun 13 20:09:47 UTC 2009

Hello, I recently purchased a ThinkPad X200. I am attempting to run
FreeBSD 7.2-RELEASE (amd64) and have had some success. I have sound
working from the headphone port (snd_hda), but not the speakers.
Wireless is not operational, as it is not detected at all by the kernel.
X works fine using the intel video driver. Below is the output from dmesg:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p1 #2: Sat Jun 13 12:51:19 EDT 2009
    root at orion:/usr/obj/usr/src/sys/ORION
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz (2394.02-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 3148926976 (3003 MB)
avail memory  = 3038056448 (2897 MB)
ACPI APIC Table: <LENOVO TP-6D   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-6D> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bef00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf2000000-0xf23fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf2400000-0xf24fffff at device 2.1 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0x1828-0x182f,0x180c-0x180f,0x1820-0x1827,0x1808-0x180b,0x1810-0x181f irq 18 at device 3.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x1840-0x185f mem 0xf2600000-0xf261ffff,0xf2625000-0xf2625fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1f:16:1e:bf:09
uhci0: <UHCI (generic) USB controller> port 0x1860-0x187f irq 20 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1880-0x189f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 22 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf2826c00-0xf2826fff irq 23 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
ugen0: <Chicony Electronics Co., Ltd. product 0x480c, class 239/2, rev 2.00/31.34, addr 2> on uhub3
hdac0: <Intel 82801I High Definition Audio Controller> mem 0xf2620000-0xf2623fff irq 17 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
pci3: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib3
uhci3: <UHCI (generic) USB controller> port 0x18c0-0x18df irq 16 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x18e0-0x18ff irq 17 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0x1c00-0x1c1f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf2827000-0xf28273ff irq 19 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib4: <PCI-PCI bridge> at device 30.0 on pci0
pci13: <PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel AHCI controller> port 0x1c48-0x1c4f,0x183c-0x183f,0x1c40-0x1c47,0x1838-0x183b,0x1c20-0x1c3f mem 0xf2826000-0xf28267ff irq 16 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.20 controller with 4 ports detected
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 2> on atapci1
ata6: port not implemented
ata6: [ITHREAD]
ata7: <ATA channel 3> on atapci1
ata7: port not implemented
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0xffffff0003405080 [20070320]
ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU0._OSC] (Node 0xffffff0001428c80), AE_AML_INTERNAL
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0xffffff0003408800 [20070320]
ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU1._OSC] (Node 0xffffff0001428ba0), AE_AML_INTERNAL
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xde000-0xdf7ff,0xe0000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad8: 152627MB <HITACHI HTS723216L9SA60 FC2ZC50B> at ata4-master SATA150
hdac0: HDA Codec #0: Conexant CX20561 (Hermosa)
pcm0: <HDA Conexant CX20561 (Hermosa) PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Conexant CX20561 (Hermosa) PCM #1 Analog> at cad 0 nid 1 on hdac0
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad8s2 is ufsid/4a3170a4a1588784.
GEOM_LABEL: Label for provider ad8s1a is ufsid/4a3170a412bd0989.
GEOM_LABEL: Label for provider ad8s1d is ufsid/4a3170ac73ed9a67.
GEOM_LABEL: Label for provider ad8s1e is ufsid/4a3170a6f42ca34b.
GEOM_LABEL: Label for provider ad8s1f is ufsid/4a3170a6b8af46dc.
Trying to mount root from ufs:/dev/ad8s1a
GEOM_LABEL: Label ufsid/4a3170a412bd0989 removed.
GEOM_LABEL: Label for provider ad8s1a is ufsid/4a3170a412bd0989.
GEOM_LABEL: Label ufsid/4a3170a4a1588784 removed.
GEOM_LABEL: Label for provider ad8s2 is ufsid/4a3170a4a1588784.
GEOM_LABEL: Label ufsid/4a3170a6f42ca34b removed.
GEOM_LABEL: Label for provider ad8s1e is ufsid/4a3170a6f42ca34b.
GEOM_LABEL: Label ufsid/4a3170a6b8af46dc removed.
GEOM_LABEL: Label for provider ad8s1f is ufsid/4a3170a6b8af46dc.
GEOM_LABEL: Label ufsid/4a3170ac73ed9a67 removed.
GEOM_LABEL: Label for provider ad8s1d is ufsid/4a3170ac73ed9a67.
GEOM_LABEL: Label ufsid/4a3170a412bd0989 removed.
GEOM_LABEL: Label ufsid/4a3170a4a1588784 removed.
GEOM_LABEL: Label ufsid/4a3170a6f42ca34b removed.
GEOM_LABEL: Label ufsid/4a3170a6b8af46dc removed.
GEOM_LABEL: Label ufsid/4a3170ac73ed9a67 removed.
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
drm0: [ITHREAD]

I purchased the laptop with the following wireless card:

44C8733I SBB THINKPAD B/G/N 44C5194I SBB INTEGRWIRELESSWIDEAREANETW

This appears to be a RTL8192SE. I found a page from realtek describing
it:
http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&ProdID=230

I tried downloading the Windows XP and Vista drivers from Lenovo and
was able to get them compiled using ndisgen. However when I
attempted to load them (seperately) into the kernel nothing happens.
There is no output from dmesg and no new devices in the output of
ifconfig -a.

The following is the output from lshal regarding this device:
udi = '/org/freedesktop/Hal/devices/pci_10ec_8172'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2942'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8172'  (string)
  info.vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.freebsd.bus = 3  (0x3)  (int)
  pci.freebsd.device = 0  (0x0)  (int)
  pci.freebsd.function = 0  (0x0)  (int)
  pci.freebsd.secondary_bus = 0  (0x0)  (int)
  pci.product_id = 33138  (0x8172)  (int)
  pci.subsys_product_id = 57376  (0xe020)  (int)
  pci.subsys_vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  pci.subsys_vendor_id = 4332  (0x10ec)  (int)
  pci.vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  pci.vendor_id = 4332  (0x10ec)  (int)

uname -a follows:
FreeBSD orion 7.2-RELEASE-p1 FreeBSD 7.2-RELEASE-p1 #2: Sat Jun 13
12:51:19 EDT 2009     root at orion:/usr/obj/usr/src/sys/ORION  amd64

Does anyone know why the wireless card is not appearing, even though
the drivers successfully compile?

-- 
Alex