Thinkpad T23 60 second stall on resuming 8.0-RELEASE/i386

[Nate Lawson]

Ian Smith wrote:
> Hi,
> 
> Precis: suspend by Fn-F4 or acpiconf -s3 works as usual.  When resuming 
> by hitting Fn or raising the lid, however, the screen comes back on but 
> then system freezes for pretty well exactly 60 seconds before responding 
> to anything, after which it seems to be fine, although top shows running 
> processes' TIME havig being reset to 00:00 (sometimes, not always)

> -wakeup from sleeping state (slept 00:00:07)
> +t_delta 15.f9ad99f01204edd8 too short                        <<<<<<<
> +t_delta 16.07bb5b66ef900000 too long                         <<<<<<<
> +t_delta 15.f9ad90918acc0000 too short                        <<<<<<<
> +ct_to_ts([2009-12-13 17:10:39]) = 1260724239.000000000
> +wakeup from sleeping state (slept 00:01:07)
>  ata0: reiniting channel ..
>  ata0: reset tp1 mask=03 ostat0=50 ostat1=00
>  ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
>  ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> -ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> +ata0: reset tp2 stat0=50 stat1=00 devices=0x1
>  ad0: setting PIO4 on ICH3 chip
>  ad0: setting UDMA100 on ICH3 chip
>  ata0: reinit done ..
> @@ -36,7 +37,7 @@
>  ata1: reset tp1 mask=03 ostat0=00 ostat1=00
>  ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
>  ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
> -ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
> +ata1: reset tp2 stat0=00 stat1=00 devices=0x10000

I think it's ATA timing out for some reason.

-- 
Nate