mmc does not work on HP NC6220
ales-76 at seznam.cz
ales-76 at seznam.cz
Tue Aug 18 17:35:56 UTC 2009
Hello,
The mmc does not seem to work on my HP NC6220 notebook. I have the mmc, mmcsd and sdhci compiled as modules, all the modules get loaded properly. The system is FreeBSD 7.2, i386, specifically configured and compiled for this machine. If i set hw.mmc.debug=1 and hw.sdhci.debug=1 I see following in dmesg:
Aug 17 22:00:36 malka kernel: sdhci0: <TI XX21/XX11 SD> mem 0xd0104000-0xd01040ff,0xd0105000-0xd01050ff,0xd0106000-0xd01060ff irq 22 at device 6.4 on pci2
Aug 17 22:00:36 malka kernel: sdhci0-slot0: 16MHz 4bits 3.3V DMA
Aug 17 22:00:36 malka kernel: sdhci0-slot0: ============== REGISTER DUMP ==============
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Sys addr: 0x00000000 | Version: 0x00008400
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Present: 0x00020000 | Host ctl: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Power: 0x00000000 | Blk gap: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000002
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
Aug 17 22:00:36 malka kernel: sdhci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Caps: 0x01821090 | Max curr: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: ===========================================
Aug 17 22:00:36 malka kernel: sdhci0-slot1: 16MHz 4bits 3.3V DMA
Aug 17 22:00:36 malka kernel: sdhci0-slot1: ============== REGISTER DUMP ==============
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Sys addr: 0x00000000 | Version: 0x00008400
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Blk size: 0x00000000 | Blk cnt: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Argument: 0x00000000 | Trn mode: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Present: 0x00020000 | Host ctl: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Power: 0x00000000 | Blk gap: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Wake-up: 0x00000000 | Clock: 0x00000002
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Timeout: 0x00000000 | Int stat: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
Aug 17 22:00:36 malka kernel: sdhci0-slot1: AC12 err: 0x00000000 | Slot int: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Caps: 0x01821090 | Max curr: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: ===========================================
Aug 17 22:00:36 malka kernel: sdhci0-slot2: 24MHz 4bits 3.3V DMA
Aug 17 22:00:36 malka kernel: sdhci0-slot2: ============== REGISTER DUMP ==============
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Sys addr: 0x00000000 | Version: 0x00008400
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Blk size: 0x00000000 | Blk cnt: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Argument: 0x00000000 | Trn mode: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Present: 0x000a0000 | Host ctl: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Power: 0x00000000 | Blk gap: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Wake-up: 0x00000000 | Clock: 0x00000002
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Timeout: 0x00000000 | Int stat: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
Aug 17 22:00:36 malka kernel: sdhci0-slot2: AC12 err: 0x00000000 | Slot int: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Caps: 0x01821898 | Max curr: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: ===========================================
Aug 17 22:00:36 malka kernel: sdhci0: 3 slot(s) allocated
Aug 17 22:00:36 malka kernel: sdhci0: [ITHREAD]
That is form sdhci, mmc does not say anything at all. If I put a SD card inside the slot nothing happens - no message in dmesg, no device created in /dev. Seems that the mmc does not recognize the hw.
Lspci output is there:
02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0101000 (32-bit, non-prefetchable)
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
Memory window 0: fffff000-00000000 (prefetchable)
Memory window 1: fffff000-00000000 (prefetchable)
I/O window 0: 0000fffc-00000003
I/O window 1: 0000fffc-00000003
BridgeCtl: Parity- SERR- ISA+ VGA- MAbort- >Reset+ 16bInt- PostWrite+
16-bit legacy interface ports at 0001
02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d0102000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
02:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at d0104000 (32-bit, non-prefetchable)
Region 1: Memory at d0105000 (32-bit, non-prefetchable)
Region 2: Memory at d0106000 (32-bit, non-prefetchable)
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:06.5 Communication controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0107000 (32-bit, non-prefetchable)
Region 1: Memory at d0108000 (32-bit, non-prefetchable)
Region 2: Memory at d0109000 (32-bit, non-prefetchable)
Region 3: Memory at d010a000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
According to the entries in the driver the TI chipset is supported. I know the hardware is not broken, because it worked flawlessly under Linux. I have tried to play with hw.pci.do_power_resume and hw.pci_do_power_nodriver, but to no avail. Have I forgot something? Are there any dependencies that are not forced during compile time? I include full dmesg, lspci and kldstat.
Thanks for an advice
Ales Blaha
-------------- next part --------------
Aug 17 21:44:37 malka newsyslog[497]: logfile first created
Aug 17 21:44:37 malka syslogd: kernel boot file is /boot/kernel/kernel
Aug 17 21:44:37 malka kernel: Waiting (max 60 seconds) for system process `vnlru' to stop...done
Aug 17 21:44:37 malka kernel: Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Aug 17 21:44:37 malka kernel: Waiting (max 60 seconds) for system process `syncer' to stop...
Aug 17 21:44:37 malka kernel: Syncing disks, vnodes remaining...2 2 1 1 0 0 0 done
Aug 17 21:44:37 malka kernel: All buffers synced.
Aug 17 21:44:37 malka kernel: Uptime: 8m7s
Aug 17 21:44:37 malka kernel: Rebooting...
Aug 17 21:44:37 malka kernel: Copyright (c) 1992-2009 The FreeBSD Project.
Aug 17 21:44:37 malka kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Aug 17 21:44:37 malka kernel: The Regents of the University of California. All rights reserved.
Aug 17 21:44:37 malka kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Aug 17 21:44:37 malka kernel: FreeBSD 7.2-RELEASE #1: Sat Aug 15 06:10:01 CEST 2009
Aug 17 21:44:37 malka kernel: root at malka:/usr/obj/usr/src/sys/MALKA
Aug 17 21:44:37 malka kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Aug 17 21:44:37 malka kernel: CPU: Intel(R) Pentium(R) M processor 1.73GHz (798.09-MHz 686-class CPU)
Aug 17 21:44:37 malka kernel: Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Aug 17 21:44:37 malka kernel: Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Aug 17 21:44:37 malka kernel: Features2=0x180<EST,TM2>
Aug 17 21:44:37 malka kernel: AMD Features=0x100000<NX>
Aug 17 21:44:37 malka kernel: real memory = 1065156608 (1015 MB)
Aug 17 21:44:37 malka kernel: avail memory = 1033785344 (985 MB)
Aug 17 21:44:37 malka kernel: ACPI APIC Table: <HP 0944 >
Aug 17 21:44:37 malka kernel: This module (opensolaris) contains code covered by the
Aug 17 21:44:37 malka kernel: Common Development and Distribution License (CDDL)
Aug 17 21:44:37 malka kernel: see http://opensolaris.org/os/licensing/opensolaris_license/
Aug 17 21:44:37 malka kernel: ioapic0: Changing APIC ID to 1
Aug 17 21:44:37 malka kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Aug 17 21:44:37 malka kernel: acpi0: <HP 0944> on motherboard
Aug 17 21:44:37 malka kernel: acpi0: [ITHREAD]
Aug 17 21:44:37 malka kernel: acpi0: Power Button (fixed)
Aug 17 21:44:37 malka kernel: acpi0: reservation of 0, a0000 (3) failed
Aug 17 21:44:37 malka kernel: acpi0: reservation of 100000, 3f700000 (3) failed
Aug 17 21:44:37 malka kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
Aug 17 21:44:37 malka kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
Aug 17 21:44:37 malka kernel: acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
Aug 17 21:44:37 malka kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Aug 17 21:44:37 malka kernel: pci0: <ACPI PCI bus> on pcib0
Aug 17 21:44:37 malka kernel: vgapci0: <VGA-compatible display> port 0x5000-0x5007 mem 0xd0400000-0xd047ffff,0xc0000000-0xcfffffff,0xd0480000-0xd04bffff irq 16 at device 2.0 on pci0
Aug 17 21:44:37 malka kernel: agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
Aug 17 21:44:37 malka kernel: agp0: detected 7932k stolen memory
Aug 17 21:44:37 malka kernel: agp0: aperture size is 256M
Aug 17 21:44:37 malka kernel: vgapci1: <VGA-compatible display> mem 0xd0500000-0xd057ffff at device 2.1 on pci0
Aug 17 21:44:37 malka kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Aug 17 21:44:37 malka kernel: pci16: <ACPI PCI bus> on pcib1
Aug 17 21:44:37 malka kernel: pci0:16:0:0: invalid VPD data, remain 0xffff
Aug 17 21:44:37 malka kernel: bge0: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16
Aug 17 21:44:37 malka kernel: miibus0: <MII bus> on bge0
Aug 17 21:44:37 malka kernel: brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
Aug 17 21:44:37 malka kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Aug 17 21:44:37 malka kernel: bge0: Ethernet address: 00:14:c2:e2:be:54
Aug 17 21:44:37 malka kernel: bge0: [ITHREAD]
Aug 17 21:44:37 malka kernel: pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
Aug 17 21:44:37 malka kernel: pci32: <ACPI PCI bus> on pcib2
Aug 17 21:44:37 malka kernel: uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x2020-0x203f irq 20 at device 29.0 on pci0
Aug 17 21:44:37 malka kernel: uhci0: [GIANT-LOCKED]
Aug 17 21:44:37 malka kernel: uhci0: [ITHREAD]
Aug 17 21:44:37 malka kernel: usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
Aug 17 21:44:37 malka kernel: usb0: USB revision 1.0
Aug 17 21:44:37 malka kernel: uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
Aug 17 21:44:37 malka kernel: uhub0: 2 ports with 2 removable, self powered
Aug 17 21:44:37 malka kernel: uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x2040-0x205f irq 17 at device 29.1 on pci0
Aug 17 21:44:37 malka kernel: uhci1: [GIANT-LOCKED]
Aug 17 21:44:37 malka kernel: uhci1: [ITHREAD]
Aug 17 21:44:37 malka kernel: usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
Aug 17 21:44:37 malka kernel: usb1: USB revision 1.0
Aug 17 21:44:37 malka kernel: uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
Aug 17 21:44:37 malka kernel: uhub1: 2 ports with 2 removable, self powered
Aug 17 21:44:37 malka kernel: uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x2060-0x207f irq 18 at device 29.2 on pci0
Aug 17 21:44:37 malka kernel: uhci2: [GIANT-LOCKED]
Aug 17 21:44:37 malka kernel: uhci2: [ITHREAD]
Aug 17 21:44:37 malka kernel: usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
Aug 17 21:44:37 malka kernel: usb2: USB revision 1.0
Aug 17 21:44:37 malka kernel: uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
Aug 17 21:44:37 malka kernel: uhub2: 2 ports with 2 removable, self powered
Aug 17 21:44:37 malka kernel: ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd0580000-0xd05803ff irq 20 at device 29.7 on pci0
Aug 17 21:44:37 malka kernel: ehci0: [GIANT-LOCKED]
Aug 17 21:44:37 malka kernel: ehci0: [ITHREAD]
Aug 17 21:44:37 malka kernel: usb3: EHCI version 1.0
Aug 17 21:44:37 malka kernel: usb3: wrong number of companions (4 != 3)
Aug 17 21:44:37 malka kernel: usb3: companion controllers, 2 ports each: usb0 usb1 usb2
Aug 17 21:44:37 malka kernel: usb3: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
Aug 17 21:44:37 malka kernel: usb3: USB revision 2.0
Aug 17 21:44:37 malka kernel: uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
Aug 17 21:44:37 malka kernel: uhub3: 8 ports with 8 removable, self powered
Aug 17 21:44:37 malka kernel: pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Aug 17 21:44:37 malka kernel: pci2: <ACPI PCI bus> on pcib3
Aug 17 21:44:37 malka kernel: iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0100000-0xd0100fff irq 21 at device 4.0 on pci2
Aug 17 21:44:37 malka kernel: iwi0: Ethernet address: 00:15:00:43:e2:2e
Aug 17 21:44:37 malka kernel: iwi0: [ITHREAD]
Aug 17 21:44:37 malka kernel: cbb0: <TI6411 PCI-CardBus Bridge> mem 0xd0101000-0xd0101fff irq 18 at device 6.0 on pci2
Aug 17 21:44:37 malka kernel: cardbus0: <CardBus bus> on cbb0
Aug 17 21:44:37 malka kernel: cbb0: [ITHREAD]
Aug 17 21:44:37 malka kernel: pci2: <mass storage> at device 6.3 (no driver attached)
Aug 17 21:44:37 malka kernel: sdhci0: <TI XX21/XX11 SD> mem 0xd0104000-0xd01040ff,0xd0105000-0xd01050ff,0xd0106000-0xd01060ff irq 22 at device 6.4 on pci2
Aug 17 21:44:37 malka kernel: sdhci0: 3 slot(s) allocated
Aug 17 21:44:37 malka kernel: sdhci0: [ITHREAD]
Aug 17 21:44:37 malka kernel: pci2: <simple comms> at device 6.5 (no driver attached)
Aug 17 21:44:37 malka kernel: pcm0: <Intel ICH6 (82801FB)> port 0x2100-0x21ff,0x2200-0x223f mem 0xd0581000-0xd05811ff,0xd0582000-0xd05820ff irq 21 at device 30.2 on pci0
Aug 17 21:44:37 malka kernel: pcm0: [ITHREAD]
Aug 17 21:44:37 malka kernel: pcm0: <Analog Devices AD1981B AC97 Codec>
Aug 17 21:44:37 malka kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Aug 17 21:44:37 malka kernel: isa0: <ISA bus> on isab0
Aug 17 21:44:37 malka kernel: atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2240-0x224f irq 16 at device 31.1 on pci0
Aug 17 21:44:37 malka kernel: ata0: <ATA channel 0> on atapci0
Aug 17 21:44:37 malka kernel: ata0: [ITHREAD]
Aug 17 21:44:37 malka kernel: ata1: <ATA channel 1> on atapci0
Aug 17 21:44:37 malka kernel: ata1: [ITHREAD]
Aug 17 21:44:37 malka kernel: battery0: <ACPI Control Method Battery> on acpi0
Aug 17 21:44:37 malka kernel: battery1: <ACPI Control Method Battery> on acpi0
Aug 17 21:44:37 malka kernel: acpi_acad0: <AC Adapter> on acpi0
Aug 17 21:44:37 malka kernel: acpi_button0: <Sleep Button> on acpi0
Aug 17 21:44:37 malka kernel: acpi_lid0: <Control Method Lid Switch> on acpi0
Aug 17 21:44:37 malka kernel: acpi_tz0: <Thermal Zone> on acpi0
Aug 17 21:44:37 malka kernel: acpi_tz1: <Thermal Zone> on acpi0
Aug 17 21:44:37 malka kernel: acpi_tz2: <Thermal Zone> on acpi0
Aug 17 21:44:37 malka kernel: acpi_tz3: <Thermal Zone> on acpi0
Aug 17 21:44:37 malka kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Aug 17 21:44:37 malka kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Aug 17 21:44:37 malka kernel: kbd0 at atkbd0
Aug 17 21:44:37 malka kernel: atkbd0: [GIANT-LOCKED]
Aug 17 21:44:37 malka kernel: atkbd0: [ITHREAD]
Aug 17 21:44:37 malka kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Aug 17 21:44:37 malka kernel: psm0: [GIANT-LOCKED]
Aug 17 21:44:37 malka kernel: psm0: [ITHREAD]
Aug 17 21:44:37 malka kernel: psm0: model IntelliMouse, device ID 3
Aug 17 21:44:37 malka kernel: cpu0: <ACPI CPU> on acpi0
Aug 17 21:44:37 malka kernel: acpi_throttle0: <ACPI CPU Throttling> on cpu0
Aug 17 21:44:37 malka kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0
Aug 17 21:44:37 malka kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
Aug 17 21:44:37 malka kernel: sc0: <System console> at flags 0x100 on isa0
Aug 17 21:44:37 malka kernel: sc0: VGA <12 virtual consoles, flags=0x300>
Aug 17 21:44:37 malka kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Aug 17 21:44:37 malka kernel: WARNING: ZFS is considered to be an experimental feature in FreeBSD.
Aug 17 21:44:37 malka kernel: Timecounter "TSC" frequency 798085320 Hz quality 800
Aug 17 21:44:37 malka kernel: Timecounters tick every 10.000 msec
Aug 17 21:44:37 malka kernel: ad0: 38154MB <FUJITSU MHV2040AH 00830097> at ata0-master UDMA100
Aug 17 21:44:37 malka kernel: ZFS filesystem version 6
Aug 17 21:44:37 malka kernel: ZFS storage pool version 6
Aug 17 21:44:37 malka kernel: acd0: DVDROM <DVD-ROM A765/1.51> at ata0-slave PIO4
Aug 17 21:44:37 malka kernel: Trying to mount root from ufs:/dev/ad0s1a
Aug 17 21:44:37 malka savecore: no dumps found
Aug 17 21:44:37 malka kernel: fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
Aug 17 21:45:02 malka kernel: drm0: <Intel i915GM> on vgapci0
Aug 17 21:45:02 malka kernel: vgapci0: child drm0 requested pci_enable_busmaster
Aug 17 21:45:02 malka kernel: info: [drm] AGP at 0xc0000000 256MB
Aug 17 21:45:02 malka kernel: info: [drm] Initialized i915 1.6.0 20080730
Aug 17 21:45:03 malka kernel: drm0: [ITHREAD]
Aug 17 21:45:15 malka su: ales to root on /dev/ttyp3
Aug 17 21:50:04 malka kernel: sdhci0: detached
Aug 17 21:50:23 malka kernel: sdhci0: <TI XX21/XX11 SD> mem 0xd0104000-0xd01040ff,0xd0105000-0xd01050ff,0xd0106000-0xd01060ff irq 22 at device 6.4 on pci2
Aug 17 21:50:23 malka kernel: sdhci0: 3 slot(s) allocated
Aug 17 21:50:23 malka kernel: sdhci0: [ITHREAD]
Aug 17 21:59:01 malka kernel: pid 743 (Xorg), uid 0: exited on signal 11
Aug 17 21:59:10 malka login: ROOT LOGIN (root) ON ttyv0
Aug 17 21:59:14 malka reboot: rebooted by root
Aug 17 21:59:14 malka syslogd: exiting on signal 15
Aug 17 22:00:36 malka syslogd: kernel boot file is /boot/kernel/kernel
Aug 17 22:00:36 malka kernel: Waiting (max 60 seconds) for system process `vnlru' to stop...done
Aug 17 22:00:36 malka kernel: Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Aug 17 22:00:36 malka kernel: Waiting (max 60 seconds) for system process `syncer' to stop...
Aug 17 22:00:36 malka kernel: Syncing disks, vnodes remaining...2 2 1 1 0 0 0 done
Aug 17 22:00:36 malka kernel: All buffers synced.
Aug 17 22:00:36 malka kernel: Uptime: 15m8s
Aug 17 22:00:36 malka kernel: Rebooting...
Aug 17 22:00:36 malka kernel: Copyright (c) 1992-2009 The FreeBSD Project.
Aug 17 22:00:36 malka kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Aug 17 22:00:36 malka kernel: The Regents of the University of California. All rights reserved.
Aug 17 22:00:36 malka kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Aug 17 22:00:36 malka kernel: FreeBSD 7.2-RELEASE #1: Sat Aug 15 06:10:01 CEST 2009
Aug 17 22:00:36 malka kernel: root at malka:/usr/obj/usr/src/sys/MALKA
Aug 17 22:00:36 malka kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Aug 17 22:00:36 malka kernel: CPU: Intel(R) Pentium(R) M processor 1.73GHz (798.08-MHz 686-class CPU)
Aug 17 22:00:36 malka kernel: Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Aug 17 22:00:36 malka kernel: Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Aug 17 22:00:36 malka kernel: Features2=0x180<EST,TM2>
Aug 17 22:00:36 malka kernel: AMD Features=0x100000<NX>
Aug 17 22:00:36 malka kernel: real memory = 1065156608 (1015 MB)
Aug 17 22:00:36 malka kernel: avail memory = 1033785344 (985 MB)
Aug 17 22:00:36 malka kernel: ACPI APIC Table: <HP 0944 >
Aug 17 22:00:36 malka kernel: This module (opensolaris) contains code covered by the
Aug 17 22:00:36 malka kernel: Common Development and Distribution License (CDDL)
Aug 17 22:00:36 malka kernel: see http://opensolaris.org/os/licensing/opensolaris_license/
Aug 17 22:00:36 malka kernel: ioapic0: Changing APIC ID to 1
Aug 17 22:00:36 malka kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Aug 17 22:00:36 malka kernel: acpi0: <HP 0944> on motherboard
Aug 17 22:00:36 malka kernel: acpi0: [ITHREAD]
Aug 17 22:00:36 malka kernel: acpi0: Power Button (fixed)
Aug 17 22:00:36 malka kernel: acpi0: reservation of 0, a0000 (3) failed
Aug 17 22:00:36 malka kernel: acpi0: reservation of 100000, 3f700000 (3) failed
Aug 17 22:00:36 malka kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
Aug 17 22:00:36 malka kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
Aug 17 22:00:36 malka kernel: acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
Aug 17 22:00:36 malka kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Aug 17 22:00:36 malka kernel: pci0: <ACPI PCI bus> on pcib0
Aug 17 22:00:36 malka kernel: vgapci0: <VGA-compatible display> port 0x5000-0x5007 mem 0xd0400000-0xd047ffff,0xc0000000-0xcfffffff,0xd0480000-0xd04bffff irq 16 at device 2.0 on pci0
Aug 17 22:00:36 malka kernel: agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
Aug 17 22:00:36 malka kernel: agp0: detected 7932k stolen memory
Aug 17 22:00:36 malka kernel: agp0: aperture size is 256M
Aug 17 22:00:36 malka kernel: vgapci1: <VGA-compatible display> mem 0xd0500000-0xd057ffff at device 2.1 on pci0
Aug 17 22:00:36 malka kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Aug 17 22:00:36 malka kernel: pci16: <ACPI PCI bus> on pcib1
Aug 17 22:00:36 malka kernel: pci0:16:0:0: invalid VPD data, remain 0xffff
Aug 17 22:00:36 malka kernel: bge0: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16
Aug 17 22:00:36 malka kernel: miibus0: <MII bus> on bge0
Aug 17 22:00:36 malka kernel: brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
Aug 17 22:00:36 malka kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Aug 17 22:00:36 malka kernel: bge0: Ethernet address: 00:14:c2:e2:be:54
Aug 17 22:00:36 malka kernel: bge0: [ITHREAD]
Aug 17 22:00:36 malka kernel: pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
Aug 17 22:00:36 malka kernel: pci32: <ACPI PCI bus> on pcib2
Aug 17 22:00:36 malka kernel: uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x2020-0x203f irq 20 at device 29.0 on pci0
Aug 17 22:00:36 malka kernel: uhci0: [GIANT-LOCKED]
Aug 17 22:00:36 malka kernel: uhci0: [ITHREAD]
Aug 17 22:00:36 malka kernel: usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
Aug 17 22:00:36 malka kernel: usb0: USB revision 1.0
Aug 17 22:00:36 malka kernel: uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
Aug 17 22:00:36 malka kernel: uhub0: 2 ports with 2 removable, self powered
Aug 17 22:00:36 malka kernel: uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x2040-0x205f irq 17 at device 29.1 on pci0
Aug 17 22:00:36 malka kernel: uhci1: [GIANT-LOCKED]
Aug 17 22:00:36 malka kernel: uhci1: [ITHREAD]
Aug 17 22:00:36 malka kernel: usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
Aug 17 22:00:36 malka kernel: usb1: USB revision 1.0
Aug 17 22:00:36 malka kernel: uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
Aug 17 22:00:36 malka kernel: uhub1: 2 ports with 2 removable, self powered
Aug 17 22:00:36 malka kernel: uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x2060-0x207f irq 18 at device 29.2 on pci0
Aug 17 22:00:36 malka kernel: uhci2: [GIANT-LOCKED]
Aug 17 22:00:36 malka kernel: uhci2: [ITHREAD]
Aug 17 22:00:36 malka kernel: usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
Aug 17 22:00:36 malka kernel: usb2: USB revision 1.0
Aug 17 22:00:36 malka kernel: uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
Aug 17 22:00:36 malka kernel: uhub2: 2 ports with 2 removable, self powered
Aug 17 22:00:36 malka kernel: ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd0580000-0xd05803ff irq 20 at device 29.7 on pci0
Aug 17 22:00:36 malka kernel: ehci0: [GIANT-LOCKED]
Aug 17 22:00:36 malka kernel: ehci0: [ITHREAD]
Aug 17 22:00:36 malka kernel: usb3: EHCI version 1.0
Aug 17 22:00:36 malka kernel: usb3: wrong number of companions (4 != 3)
Aug 17 22:00:36 malka kernel: usb3: companion controllers, 2 ports each: usb0 usb1 usb2
Aug 17 22:00:36 malka kernel: usb3: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
Aug 17 22:00:36 malka kernel: usb3: USB revision 2.0
Aug 17 22:00:36 malka kernel: uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
Aug 17 22:00:36 malka kernel: uhub3: 8 ports with 8 removable, self powered
Aug 17 22:00:36 malka kernel: pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Aug 17 22:00:36 malka kernel: pci2: <ACPI PCI bus> on pcib3
Aug 17 22:00:36 malka kernel: iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0100000-0xd0100fff irq 21 at device 4.0 on pci2
Aug 17 22:00:36 malka kernel: iwi0: Ethernet address: 00:15:00:43:e2:2e
Aug 17 22:00:36 malka kernel: iwi0: [ITHREAD]
Aug 17 22:00:36 malka kernel: cbb0: <TI6411 PCI-CardBus Bridge> mem 0xd0101000-0xd0101fff irq 18 at device 6.0 on pci2
Aug 17 22:00:36 malka kernel: cardbus0: <CardBus bus> on cbb0
Aug 17 22:00:36 malka kernel: cbb0: [ITHREAD]
Aug 17 22:00:36 malka kernel: pci2: <mass storage> at device 6.3 (no driver attached)
Aug 17 22:00:36 malka kernel: sdhci0: <TI XX21/XX11 SD> mem 0xd0104000-0xd01040ff,0xd0105000-0xd01050ff,0xd0106000-0xd01060ff irq 22 at device 6.4 on pci2
Aug 17 22:00:36 malka kernel: sdhci0-slot0: 16MHz 4bits 3.3V DMA
Aug 17 22:00:36 malka kernel: sdhci0-slot0: ============== REGISTER DUMP ==============
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Sys addr: 0x00000000 | Version: 0x00008400
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Present: 0x00020000 | Host ctl: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Power: 0x00000000 | Blk gap: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000002
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
Aug 17 22:00:36 malka kernel: sdhci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: Caps: 0x01821090 | Max curr: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot0: ===========================================
Aug 17 22:00:36 malka kernel: sdhci0-slot1: 16MHz 4bits 3.3V DMA
Aug 17 22:00:36 malka kernel: sdhci0-slot1: ============== REGISTER DUMP ==============
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Sys addr: 0x00000000 | Version: 0x00008400
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Blk size: 0x00000000 | Blk cnt: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Argument: 0x00000000 | Trn mode: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Present: 0x00020000 | Host ctl: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Power: 0x00000000 | Blk gap: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Wake-up: 0x00000000 | Clock: 0x00000002
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Timeout: 0x00000000 | Int stat: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
Aug 17 22:00:36 malka kernel: sdhci0-slot1: AC12 err: 0x00000000 | Slot int: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: Caps: 0x01821090 | Max curr: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot1: ===========================================
Aug 17 22:00:36 malka kernel: sdhci0-slot2: 24MHz 4bits 3.3V DMA
Aug 17 22:00:36 malka kernel: sdhci0-slot2: ============== REGISTER DUMP ==============
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Sys addr: 0x00000000 | Version: 0x00008400
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Blk size: 0x00000000 | Blk cnt: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Argument: 0x00000000 | Trn mode: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Present: 0x000a0000 | Host ctl: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Power: 0x00000000 | Blk gap: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Wake-up: 0x00000000 | Clock: 0x00000002
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Timeout: 0x00000000 | Int stat: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
Aug 17 22:00:36 malka kernel: sdhci0-slot2: AC12 err: 0x00000000 | Slot int: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: Caps: 0x01821898 | Max curr: 0x00000000
Aug 17 22:00:36 malka kernel: sdhci0-slot2: ===========================================
Aug 17 22:00:36 malka kernel: sdhci0: 3 slot(s) allocated
Aug 17 22:00:36 malka kernel: sdhci0: [ITHREAD]
Aug 17 22:00:36 malka kernel: pci2: <simple comms> at device 6.5 (no driver attached)
Aug 17 22:00:36 malka kernel: pcm0: <Intel ICH6 (82801FB)> port 0x2100-0x21ff,0x2200-0x223f mem 0xd0581000-0xd05811ff,0xd0582000-0xd05820ff irq 21 at device 30.2 on pci0
Aug 17 22:00:36 malka kernel: pcm0: [ITHREAD]
Aug 17 22:00:36 malka kernel: pcm0: <Analog Devices AD1981B AC97 Codec>
Aug 17 22:00:36 malka kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Aug 17 22:00:36 malka kernel: isa0: <ISA bus> on isab0
Aug 17 22:00:36 malka kernel: atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2240-0x224f irq 16 at device 31.1 on pci0
Aug 17 22:00:36 malka kernel: ata0: <ATA channel 0> on atapci0
Aug 17 22:00:36 malka kernel: ata0: [ITHREAD]
Aug 17 22:00:36 malka kernel: ata1: <ATA channel 1> on atapci0
Aug 17 22:00:36 malka kernel: ata1: [ITHREAD]
Aug 17 22:00:36 malka kernel: battery0: <ACPI Control Method Battery> on acpi0
Aug 17 22:00:36 malka kernel: battery1: <ACPI Control Method Battery> on acpi0
Aug 17 22:00:36 malka kernel: acpi_acad0: <AC Adapter> on acpi0
Aug 17 22:00:36 malka kernel: acpi_button0: <Sleep Button> on acpi0
Aug 17 22:00:36 malka kernel: acpi_lid0: <Control Method Lid Switch> on acpi0
Aug 17 22:00:36 malka kernel: acpi_tz0: <Thermal Zone> on acpi0
Aug 17 22:00:36 malka kernel: acpi_tz1: <Thermal Zone> on acpi0
Aug 17 22:00:36 malka kernel: acpi_tz2: <Thermal Zone> on acpi0
Aug 17 22:00:36 malka kernel: acpi_tz3: <Thermal Zone> on acpi0
Aug 17 22:00:36 malka kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Aug 17 22:00:36 malka kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Aug 17 22:00:36 malka kernel: kbd0 at atkbd0
Aug 17 22:00:36 malka kernel: atkbd0: [GIANT-LOCKED]
Aug 17 22:00:36 malka kernel: atkbd0: [ITHREAD]
Aug 17 22:00:36 malka kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Aug 17 22:00:36 malka kernel: psm0: [GIANT-LOCKED]
Aug 17 22:00:36 malka kernel: psm0: [ITHREAD]
Aug 17 22:00:36 malka kernel: psm0: model IntelliMouse, device ID 3
Aug 17 22:00:36 malka kernel: cpu0: <ACPI CPU> on acpi0
Aug 17 22:00:36 malka kernel: acpi_throttle0: <ACPI CPU Throttling> on cpu0
Aug 17 22:00:36 malka kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0
Aug 17 22:00:36 malka kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
Aug 17 22:00:36 malka kernel: sc0: <System console> at flags 0x100 on isa0
Aug 17 22:00:36 malka kernel: sc0: VGA <12 virtual consoles, flags=0x300>
Aug 17 22:00:36 malka kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Aug 17 22:00:36 malka kernel: WARNING: ZFS is considered to be an experimental feature in FreeBSD.
Aug 17 22:00:36 malka kernel: Timecounter "TSC" frequency 798082932 Hz quality 800
Aug 17 22:00:36 malka kernel: Timecounters tick every 10.000 msec
Aug 17 22:00:36 malka kernel: ad0: 38154MB <FUJITSU MHV2040AH 00830097> at ata0-master UDMA100
Aug 17 22:00:36 malka kernel: ZFS filesystem version 6
Aug 17 22:00:36 malka kernel: ZFS storage pool version 6
Aug 17 22:00:36 malka kernel: acd0: DVDROM <DVD-ROM A765/1.51> at ata0-slave PIO4
Aug 17 22:00:36 malka kernel: Trying to mount root from ufs:/dev/ad0s1a
Aug 17 22:00:36 malka savecore: no dumps found
Aug 17 22:00:36 malka kernel: fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
Aug 17 22:00:53 malka kernel: drm0: <Intel i915GM> on vgapci0
Aug 17 22:00:53 malka kernel: vgapci0: child drm0 requested pci_enable_busmaster
Aug 17 22:00:53 malka kernel: info: [drm] AGP at 0xc0000000 256MB
Aug 17 22:00:53 malka kernel: info: [drm] Initialized i915 1.6.0 20080730
Aug 17 22:00:54 malka kernel: drm0: [ITHREAD]
-------------- next part --------------
Id Refs Address Size Name
1 49 0x80400000 361b7c kernel
Contains modules:
Id Name
160 shmget
177 aio_cancel
176 aio_error
175 aio_fsync
174 aio_read
173 aio_return
172 aio_suspend
171 aio_waitcomplete
170 aio_write
169 lio_listio
168 oaio_read
167 oaio_write
166 olio_listio
152 msgctl
151 msgget
158 semsys
157 __semctl
156 semget
155 semop
150 msgsnd
149 msgrcv
153 msgsys
164 shmsys
163 shmat
162 shmctl
161 shmdt
179 loop
144 elf32
145 shell
148 sysvmsg
154 sysvsem
159 sysvshm
165 aio
131 devfs
180 ufs
99 ata
95 cam
96 probe
98 da
97 xpt
125 uhub/ums
124 uhub/umass
143 isa/pnp
191 isa/pnpbios
190 scrndr-vga
189 scterm-sc
188 io
142 isa/orm
141 isa/isahint
187 atkbdc/psm
186 isa/psmcpnp
185 acpi/psmcpnp
123 uhub/ulpt
184 isa/atkbdc
183 acpi/atkbdc
182 atkbdc/atkbd
140 isab/isa
139 eisab/isa
122 uhub/ukbd
121 usb/uhub
120 uhub/uhub
119 uhub/uhid
118 pci/uhci
117 cardbus/uhci
116 uhub/ugen
115 pci/ehci
114 cardbus/ehci
227 hostb/agp_via
226 hostb/agp_sis
225 hostb/agp_nvidia
224 hostb/agp_intel
223 vgapci/agp_i810
222 hostb/agp_ati
221 hostb/agp_amd64
220 hostb/agp_amd
219 hostb/agp_ali
218 isa/vga
105 mem
217 isa/sc
113 pci/vgapci
216 legacy/pir
112 pci/pcib
215 legacy/pcib
214 isa/pcibus_pnp
213 pci/pcibios_pcib
212 vesa
211 nexus/npx
210 isa/npxisa
209 acpi/npxisa
208 isa/atdma
207 acpi/atdma
206 legacy/isa
205 vgapci/dpms
204 isa/attimer
203 acpi/attimer
111 pcib/pci
202 isa/atpic
201 acpi/atpic
102 atapci/ata
101 isa/ata
200 root/nexus
199 nexus/ram
198 isa/sysresource
104 ata/acd
197 legacy/mptable_pcib
196 pci/mptable_pcib
100 ata/ad
146 cpu/cpufreq
103 pci/atapci
110 pci/isab
109 pci/ignore_pci
130 watchdog
108 pci/hostb
195 nexus/legacy
194 legacy/cpu
107 pci/fixup_pci
106 null
129 ohci/usb
193 pci/ioapic
192 nexus/apic
128 uhci/usb
127 ehci/usb
126 slhci/usb
134 g_disk
138 g_part
137 g_vfs
181 g_class
147 rootbus
136 g_mbr
135 g_mbrext
133 g_dev
132 g_bsd
178 ether
2 1 0x80762000 a49c cd9660.ko
Contains modules:
Id Name
1 cd9660
3 1 0x8076d000 11a40 msdosfs.ko
Contains modules:
Id Name
2 msdosfs
4 1 0x8077f000 6828 procfs.ko
Contains modules:
Id Name
4 procfs
5 2 0x80786000 7360 pseudofs.ko
Contains modules:
Id Name
3 pseudofs
6 1 0x8078e000 b83b0 zfs.ko
Contains modules:
Id Name
6 zfsctrl
7 zfs
9 zfs_vdev
8 zfs_zvol
7 2 0x80847000 23bc opensolaris.ko
Contains modules:
Id Name
5 opensolaris
8 1 0x8084a000 11a38 if_bge.ko
Contains modules:
Id Name
39 pci/bge
38 bge/miibus
9 2 0x8085c000 23d50 miibus.ko
Contains modules:
Id Name
17 miibus/xlphy
16 miibus/e1000phy
15 miibus/ciphy
14 miibus/brgphy
13 miibus/bmtphy
12 miibus/atphy
11 miibus/amphy
10 miibus/acphy
37 miibus/xmphy
36 miibus/ukphy
35 miibus/truephy
34 miibus/tlphy
33 miibus/tdkphy
32 miibus/ruephy
31 miibus/rlphy
30 miibus/rgephy
29 miibus/qsphy
28 miibus/pnaphy
27 miibus/nsphyter
26 miibus/nsphy
25 miibus/nsgphy
24 miibus/mlphy
23 miibus/lxtphy
22 miibus/jmphy
21 miibus/ip1000phy
20 miibus/inphy
19 miibus/icsphy
18 miibus/gentbi
10 1 0x80880000 10258 if_iwi.ko
Contains modules:
Id Name
42 pci/iwi
11 8 0x80891000 2c114 wlan.ko
Contains modules:
Id Name
40 wlan
12 5 0x808be000 30c8 firmware.ko
Contains modules:
Id Name
41 firmware
13 2 0x808c2000 4a37c sound.ko
Contains modules:
Id Name
44 midi
43 sound
14 1 0x8090d000 6eb8 snd_ich.ko
Contains modules:
Id Name
45 pci/snd_ich
15 1 0x80914000 c348 random.ko
Contains modules:
Id Name
46 random
16 1 0x80921000 6a44c acpi.ko
Contains modules:
Id Name
65 cpu/acpi_throttle
64 acpi/acpi_smbat
63 cpu/acpi_perf
62 acpi/acpi_lid
61 acpi/acpi_hpet
60 acpi/acpi_ec
59 acpi/cpu
58 acpi/acpi_cmbat
57 acpi/acpi_acad
56 acpi/acpi_tz
55 acpi/acpi_pci_link
54 acpi/acpi_timer
53 acpi/acpi_sysresource
52 pci/acpi_pcib
51 acpi/acpi_pcib
50 pcib/acpi_pci
49 acpi/acpi_isab
48 acpi/acpi_button
47 nexus/acpi
17 1 0x8098c000 5638 cardbus.ko
Contains modules:
Id Name
66 cbb/cardbus
18 1 0x80992000 dacc cbb.ko
Contains modules:
Id Name
69 pci/cbb
68 isa/cbb
19 3 0x809a0000 3834 exca.ko
Contains modules:
Id Name
67 exca
20 1 0x809a4000 b904 cpufreq.ko
Contains modules:
Id Name
74 cpu/smist
73 cpu/powernow
72 cpu/p4tcc
71 cpu/est
70 cpu/ichss
21 1 0x809b0000 4cf4 ichsmb.ko
Contains modules:
Id Name
76 pci/ichsmb
75 ichsmb/smbus
22 2 0x809b5000 1bd0 smbus.ko
Contains modules:
Id Name
23 1 0x809b7000 30150 iwi_bss.ko
Contains modules:
Id Name
77 iwi_bss_fw
24 1 0x809e8000 2f298 iwi_ibss.ko
Contains modules:
Id Name
78 iwi_ibss_fw
25 1 0x80a18000 2f4a0 iwi_monitor.ko
Contains modules:
Id Name
79 iwi_monitor_fw
26 1 0x80a48000 4ec0 libiconv.ko
Contains modules:
Id Name
82 iconv_xlat16
81 iconv_xlat
80 iconv
30 1 0x80a63000 5354 sem.ko
Contains modules:
Id Name
87 sem
31 1 0x80a69000 ab30 zlib.ko
Contains modules:
Id Name
88 zlib
32 1 0x80a74000 1924 wlan_scan_ap.ko
Contains modules:
Id Name
89 wlan_scan_ap
33 1 0x80a76000 5200 wlan_scan_sta.ko
Contains modules:
Id Name
90 wlan_scan_sta
34 1 0x80a7c000 2e2c wlan_wep.ko
Contains modules:
Id Name
91 wlan_wep
35 1 0x80a7f000 6f84 wlan_ccmp.ko
Contains modules:
Id Name
92 wlan_ccmp
36 1 0x80a86000 431c wlan_tkip.ko
Contains modules:
Id Name
93 wlan_tkip
37 1 0x80a8b000 1b38 wlan_xauth.ko
Contains modules:
Id Name
94 wlan_xauth
38 1 0x83004000 f000 fuse.ko
Contains modules:
Id Name
228 fuse
39 1 0x83162000 9000 i915.ko
Contains modules:
Id Name
229 vgapci/i915
40 1 0x83183000 13000 drm.ko
Contains modules:
Id Name
41 1 0x83542000 4000 mmcsd.ko
Contains modules:
Id Name
230 mmc/mmcsd
42 1 0x83546000 8000 mmc.ko
Contains modules:
Id Name
232 at91_mci/mmc
231 sdhci/mmc
43 1 0x83575000 7000 sdhci.ko
Contains modules:
Id Name
233 pci/sdhci
-------------- next part --------------
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company NC6220
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0400000 (32-bit, non-prefetchable)
Region 1: I/O ports at 5000
Region 2: Memory at c0000000 (32-bit, prefetchable)
Region 3: Memory at d0480000 (32-bit, non-prefetchable)
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 308a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0500000 (32-bit, non-prefetchable)
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d0000000-d00fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 2, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Mask- 64bit- Count=1/1 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 0944
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 3, PowerLimit 16.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Mask- 64bit- Count=1/1 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 0944
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 2020
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 2040
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 2060
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0580000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d0100000-d03fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Hewlett-Packard Company Device 0944
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company Compaq NC6220
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 2100
Region 1: I/O ports at 2200
Region 2: Memory at d0581000 (32-bit, non-prefetchable)
Region 3: Memory at d0582000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 2240
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
Subsystem: Hewlett-Packard Company Device 12f5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0100000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0101000 (32-bit, non-prefetchable)
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
Memory window 0: fffff000-00000000 (prefetchable)
Memory window 1: fffff000-00000000 (prefetchable)
I/O window 0: 0000fffc-00000003
I/O window 1: 0000fffc-00000003
BridgeCtl: Parity- SERR- ISA+ VGA- MAbort- >Reset+ 16bInt- PostWrite+
16-bit legacy interface ports at 0001
02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d0102000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
02:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at d0104000 (32-bit, non-prefetchable)
Region 1: Memory at d0105000 (32-bit, non-prefetchable)
Region 2: Memory at d0106000 (32-bit, non-prefetchable)
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:06.5 Communication controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0107000 (32-bit, non-prefetchable)
Region 1: Memory at d0108000 (32-bit, non-prefetchable)
Region 2: Memory at d0109000 (32-bit, non-prefetchable)
Region 3: Memory at d010a000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
10:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
Subsystem: Hewlett-Packard Company Device 0944
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (64-bit, non-prefetchable)
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] MSI: Mask- 64bit+ Count=1/8 Enable-
Address: e3dcffbd9ffb7ffc Data: fffe
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <2us, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
More information about the freebsd-mobile
mailing list