ral0 <--> wi0 (4.11) ?

[Lystopad Oleksandr]

Hi!

I need to build wireless link between FreeBSD 4.11 with wi0 (adhoc)
interface and FreeBSD 7.0 with ral0 interface. I try many modes and
mediaopts, but no luck. :(

Please, help me build wireless network with that environment.


[root at pavilion /etc]# uname -rs
FreeBSD 7.0-STABLE
[root at pavilion /etc]# ifconfig ral0
ral0: flags=c847<UP,BROADCAST,DEBUG,RUNNING,SIMPLEX,LINK2,MULTICAST> metric 0 mtu 1500
        ether 00:0f:66:74:8b:2b
        inet 192.168.126.2 netmask 0xfffffffc broadcast 192.168.126.3
        media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11b (DS/11Mbps <adhoc>)
        status: associated
        ssid 42bc9b channel 3 (2422 Mhz 11b) bssid 2a:05:70:ac:3f:fe
        authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
        bgscanintvl 300 bgscanidle 250 roam:rssi11b 7 roam:rate11b 1
[root at pavilion /etc]# grep ral /var/run/dmesg.boot
ral0: <Ralink Technology RT2560> mem 0xfdbfe000-0xfdbfffff irq 18 at device 10.0 on pci1
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
ral0: Ethernet address: 00:0f:66:74:8b:2b
ral0: [ITHREAD]
[root at pavilion /etc]#


unix# uname -rs
FreeBSD 4.11-STABLE
unix# ifconfig wi0
wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.126.1 netmask 0xfffffffc broadcast 192.168.126.3
        ether 00:02:2d:05:77:1e
        media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps <adhoc>)
        status: associated
        ssid 42bc9b 1:42bc9b
        stationname unix
        channel 3 authmode OPEN powersavemode OFF powersavesleep 100
        wepmode OFF weptxkey 1
unix#

PING 192.168.126.2 (192.168.126.2): 56 data bytes
ping: sendto: Host is down
ping: sendto: Host is down
^C
--- 192.168.126.2 ping statistics ---
8 packets transmitted, 0 packets received, 100% packet loss

Thanks.

-- 
 Oleksandr Lystopad