SD/MMC (ricoh) reader on Thinkpad T61

[Torfinn Ingolfsen]

On Fri, 16 May 2008 20:28:51 -0400
Yuri Lukin <lists at swaggi.com> wrote:

> Thanks for the updated driver and the patch, I can confirm it fixes
> the panic on 7.0-RELEASE. On my Thinkpad T61, loading the module I

With the patch, the updated driver also works on 7.0-stable:
May 17 13:21:31 testhost-1 kernel: sdshc0: <Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter> mem 0xf8101800-0xf81018ff irq 18 at device 0.2 on pci21
May 17 13:21:31 testhost-1 kernel: sdshc0: [ITHREAD]
May 17 13:21:31 testhost-1 kernel: sdshcbus0: <SD Standard Host Controller slot bus> on sdshc0
May 17 13:21:31 testhost-1 kernel: sdshcbus0: capability: 3.3V Suspend/Resume DMA High-Speed

root at testhost-1# uname -a
FreeBSD testhost-1.kg4.no 7.0-STABLE FreeBSD 7.0-STABLE #1: Sat May 10 01:56:29 CEST 2008     root at testhost-1.kg4.no:/usr/obj/usr/src/sys/GENERIC  i386

BTW, this is also a ThinkPad T61.

When I insert a card, I get:
May 17 13:22:59 testhost-1 kernel: sdshcbus0: card inserted in slot #0
May 17 13:22:59 testhost-1 kernel: sdshcbus0: Switched to High Speed mode
May 17 13:22:59 testhost-1 kernel: sd0: <Unknown TW TWTTI rev 1.0> on sdshcbus0
May 17 13:22:59 testhost-1 kernel: sd0: Ver 1.x SD memory card
May 17 13:22:59 testhost-1 kernel: sd0: 121MB (248320 x 512-byte blocks)
May 17 13:22:59 testhost-1 kernel: sd0: access time: read 5.0ms, write 160.0ms
May 17 13:22:59 testhost-1 kernel: sd0: speed class 0
May 17 13:22:59 testhost-1 kernel: sd0: max clock 50MHz, drive at 33.000MHz
May 17 13:22:59 testhost-1 kernel: sd0: 16.500MB/s transfers with 4-bit bus width

I also teste thast I could mount the card and read iles off it. Works nicely.

To the OP - Thanks for the updated driver and patch
-- 
Regards,
Torfinn Ingolfsen
Norway