bge and wpi do not function on aspire 5920

Mon May 12 20:48:50 UTC 2008

Hi list,
I've just bought ACER ASPIRE 5920 notebook and I've installed FreeBSD-7.0-AMD64 right the way
and I've noticed that neither the LAN card nor the WLAN card work
I'm not 100% sure what the LAN card is but it should of the BroadCom NetLink family
however I get the following in the boot messages

bge0: <BroadCom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> irq 17 at device 0.0 on pci8
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6

after I saw that I've tried the WLAN by kldload if_wpi and I got this:

wpi0: <Intel(R) PRO/Wireless 3945ABG> irq19 at device 0.0 on pci6
wpi0: 0x1000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
wpi0: could not allocate memory resource
device_attach: wpi0 attach returned 6

here is the full output of dmesg:

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
    root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     T5550  @ 1.83GHz (1833.48-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 2125094912 (2026 MB)
avail memory  = 2050707456 (1955 MB)
ACPI APIC Table: <INTEL  CRESTLNE>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
acpi_ec0: warning: EC done before starting event wait
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0000000-0xf00fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf0100000-0xf01fffff at device 2.1 on pci0
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf0704800-0xf0704bff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
ugen0: <SuYin Acer CrystalEye webcam, class 239/2, rev 2.00/1.00, addr 2> on uhub2
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci6: <ACPI PCI bus> on pcib2
pci6: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci8: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> irq 17 at device 0.0 on pci8
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf0704c00-0xf0704fff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib4
fwohci0: <1394 Open Host Controller Interface> mem 0xf0400000-0xf04007ff at device 9.0 on pci10
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:24:1b:00:62:18:d7:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7b784000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:24:1b:18:d7:00
fwe0: Ethernet address: 02:24:1b:18:d7:00
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:24:1b:00:62:18:d7:00 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci10: <base peripheral> at device 9.1 (no driver attached)
pci10: <base peripheral> at device 9.2 (no driver attached)
pci10: <base peripheral> at device 9.3 (no driver attached)
pci10: <base peripheral> at device 9.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel AHCI controller> port 0x1c00-0x1c07,0x18d4-0x18d7,0x18d8-0x18df,0x18d0-0x18d3,0x18e0-0x18ff mem 0xf0704000-0xf07047ff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 3 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM> at iomem 0xe0000-0xe17ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
hptrr: no controller detected.
acd0: DVDR <HL-DT-ST DVDRAM GSA-T40N/JP01> at ata0-master UDMA33
ad4: 305245MB <WDC WD3200BEVT-22ZCT0 11.01A11> at ata2-master SATA300
GEOM_LABEL: Label for provider ad4s1 is ntfs/PQSERVICE.
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s3a
acpi_ec0: wait timed out (response), forcing polled mode
wpi0: <Intel(R) PRO/Wireless 3945ABG> irq19 at device 0.0 on pci6
wpi0: 0x1000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
wpi0: could not allocate memory resource
device_attach: wpi0 attach returned 6
bge0: <BroadCom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> irq 17 at device 0.0 on pci8
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6

Could you guys help me please
thank you

Regards
MGP

-----------------------------------------------------------------
Всичко за Евро 2008 !!!
http://euro2008.sportni.bg/