ThinkPad 380ED - PC Card controller not supported in FreeBSd 7.0?

[Torfinn Ingolfsen]

I have an old IBM ThinkPad 380ED[1] on which I run FreeBSD[2].
FreeBSD 4.11 worls great, as long as I enable pccard and configure it
correctly.
So I tried FreeBSd 7.0-release, but it seems that the PC Card
controller (or bridge or whatever) isn't detected. from 'pciconf -lv':
none1 at pci0:0:19:0: class=0x060500 card=0x00000000 chip=0x11001013 rev=0x07 hdr=0x00
vendor = 'Cirrus Logic'
device = 'CL-PD6729 PCI-to-PC Card host adapter'
class = bridge
subclass = PCI-PCMCIA

Under FreeBSD 4.11 this is detected as:
pcic0 at pci0:19:0: class=0x060500 card=0x00000000 chip=0x11001013 rev=0x07 hdr=0x00
vendor = 'Cirrus Logic'
device = 'CL-PD6729 PCI-to-PC Card host adapter'
class = bridge
subclass = PCI-PCMCIA

And the man page for pcic(4) [3] under 4.11 documents it as supported.
The same man page for 7.0 is a bit confusing: [4]. It says that this is supported, 
but in the bugs section says that it doesnt work at all. pcic doesn't work at all in 7.0?

More info as well as normal and verbose dmesgoutputs in [2].
Any hints on getting this oldie working?

References:
1) http://tingox.googlepages.com/tp380ed
2) http://tingox.googlepages.com/tp380ed_freebsd
3) http://www.freebsd.org/cgi/man.cgi?query=pcic&manpath=FreeBSD+4.11-RELEASE
4) http://www.freebsd.org/cgi/man.cgi?query=pcic&manpath=FreeBSD+7.0-RELEASE
-- 
Regards,
Torfinn Ingolfsen