Intel 3945: wpi0 after some time stops working

[Dennis Melentyev]

Just wild guess:
Linksys router send 255.255.255.255 as a netmask and routing go wild?
Just check routing, dhcp leases and resolve.conf

Then check corresponding tools.


2008/1/19, Vittorio De Martino <vittorio at de-martino.it>:
> Context: HP laptop DV6000, centrino duo, FreeBSD 7.0-BETA4
>
> Following your advice I was able to start the intel 3945 card of my notebook
> and establish a WPA connection with the AP by way of the following script:
> $$$$$$$$$$$$$$$$$$$$
> wpa_supplicant -i wpi0 -c /etc/wpa_supplicant.conf -Bw
> #ifconfig wpi0 up
> dhclient wpi0
> $$$$$$$$$$$$$$$$$$$$
>
> Now, the consequent connection is steady for 10-20 minutes than it stops
> working (ifconfig wpi0 doesn't seem to signal anything wrong!) and I cannot
> connect to anything . Following
> your advice I set sysctl debug.wpi=-2 and copied an extract of the
> resulting, quite long, /var/log/messages into
>
> http://www.de-martino.it/FreeBSD/log3945/log.txt
>
> What's wrong with my 3945?
>
> Ciao
> Vittorio
>
>
>
>
>
> _______________________________________________
> freebsd-mobile at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobile-unsubscribe at freebsd.org"
>


-- 
Dennis Melentyev