Two minute pause at acpi.ko message on old HP laptop with
7.0-RC1
Xn Nooby
xnooby at gmail.com
Tue Jan 8 20:01:15 PST 2008
The pause is right after the menu where I choose #5 Verbose Boot. It
hangs on the first message line of output which is:
/boot/kernel/acpi.ko text=0x52030...
\
In the dmesg log it looks like this is where it hangs:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RC1 #0: Mon Dec 24 12:18:24 UTC 2007
root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d93000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0d931c4.
The full verbose log is here:
=========================================================
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RC1 #0: Mon Dec 24 12:18:24 UTC 2007
root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d93000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0d931c4.
Calibrating clock(s) ... i8254 clock: 1193154 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3000119670 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.12-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,xTPR>
Logical CPUs per core: 2
Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64
byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size
L2 cache: 1024 kbytes, 8-way associative, 64 bytes/line
real memory = 1207369728 (1151 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x0000000046ae8fff, 1168904192 bytes (285377 pages)
avail memory = 1168392192 (1114 MB)
Table 'FACP' at 0x47f7ceed
Table 'APIC' at 0x47f7cf61
MADT: Found table at 0x47f7cf61
MP Configuration Table version 1.4 found at 0xc009fd70
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f64b0
bios32: Entry = 0xfd710 (c00fd710) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd710+0x258
pnpbios: Found PnP BIOS data at 0xc00f6530
pnpbios: Entry = f0000:b364 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ACPI: RSDP @ 0x0xf6500/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x47f79185/0x0030 (v 1 PTLTD RSDT 0x06040000 LTP
0x00000000)
ACPI: FACP @ 0x0x47f7ceed/0x0074 (v 1 HP Chinook 0x06040000 ATI
0x000F4240)
ACPI: DSDT @ 0x0x47f791b5/0x3D38 (v 1 HP SB200 0x06040000 INTL
0x20030509)
ACPI: FACS @ 0x0x47f7ffc0/0x0040
ACPI: APIC @ 0x0x47f7cf61/0x0068 (v 1 PTLTD APIC 0x06040000 LTP
0x00000000)
ACPI: SSDT @ 0x0x47f7cfc9/0x0037 (v 1 PTLTD ACPIHT 0x06040000 LTP
0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 21
ioapic0: intpin 9 disabled
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Dec 24 2007 12:17:58)
rr232x: RocketRAID 232x controller driver v1.02 (Dec 24 2007 12:18:02)
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd80d1000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a104
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=58331002)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.REGS -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.MREG -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2P_.CB3_.CIDS -> bus 2 dev 4 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.REGS -> bus 0 dev 20 func 3
acpi0: reservation of 100000, 47f00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 5 10 11
Validation 0 255 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 5 10 11
Validation 0 255 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 5 10 11
Validation 0 255 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 5 10 11
Validation 0 255 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1002, dev=0x5833, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Prefetchable Memory, range 32, base 0xd2000000, size 25, enabled
map[14]: type Memory, range 32, base 0xd0000000, size 12, enabled
found-> vendor=0x1002, dev=0x5838, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4347, revid=0x01
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xd0001000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4348, revid=0x01
domain=0, bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xd0002000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4353, revid=0x16
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x8040, size 4, enabled
map[14]: type Memory, range 32, base 0, size 10, enabled
found-> vendor=0x1002, dev=0x4349, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0a00, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type I/O Port, range 32, base 0x8060, size 4, enabled
found-> vendor=0x1002, dev=0x434c, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4342, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4341, revid=0x00
domain=0, bus=0, slot=20, func=5
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0420, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[10]: type Memory, range 32, base 0xd0003000, size 8, enabled
pcib0: matched entry for 0.20.INTB
pcib0: slot 20 INTB hardwired to IRQ 5
ioapic0: Changing trigger for pin 5 to level
ioapic0: Changing polarity for pin 5 to low
found-> vendor=0x1002, dev=0x434d, revid=0x01
domain=0, bus=0, slot=20, func=6
class=07-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0420, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[10]: type Memory, range 32, base 0xd0003400, size 8, enabled
pcib0: matched entry for 0.20.INTB
pcib0: slot 20 INTB hardwired to IRQ 5
agp0: <ATI RS300_200 AGP bridge> on hostb0
hostb0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xd2000000
hostb0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xd0000000
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xd0100000-0xd01fffff
pcib1: prefetched decode 0xe0000000-0x58381002efffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x5835, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0207, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 28, enabled
pcib1: requested memory range 0xe0000000-0xefffffff: good
map[14]: type I/O Port, range 32, base 0x9000, size 8, enabled
pcib1: requested I/O range 0x9000-0x90ff: in range
map[18]: type Memory, range 32, base 0xd0100000, size 16, enabled
pcib1: requested memory range 0xd0100000-0xd010ffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem
0xe0000000-0xefffffff,0xd0100000-0xd010ffff irq 16 at device 5.0 on
pci1
ohci0: <OHCI (generic) USB controller> mem 0xd0001000-0xd0001fff irq
19 at device 19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0001000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 49
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xd0002000-0xd0002fff irq
19 at device 19.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0002000
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP200 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8060-0x806f at device 20.1 on
pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8060
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 4
pcib2: I/O decode 0xa000-0xafff
pcib2: memory decode 0xd0200000-0xd02fffff
pcib2: no prefetched decode
pcib2: Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x104c, dev=0x8026, revid=0x00
domain=0, bus=2, slot=0, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd0208000, size 11, enabled
pcib2: requested memory range 0xd0208000-0xd02087ff: good
map[14]: type Memory, range 32, base 0xd0200000, size 14, enabled
pcib2: requested memory range 0xd0200000-0xd0203fff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x14e4, dev=0x4320, revid=0x03
domain=0, bus=2, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[10]: type Memory, range 32, base 0xd0204000, size 13, enabled
pcib2: requested memory range 0xd0204000-0xd0205fff: good
pcib2: matched entry for 2.2.INTA
pcib2: slot 2 INTA hardwired to IRQ 18
found-> vendor=0x10ec, dev=0x8139, revid=0x10
domain=0, bus=2, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xa000, size 8, enabled
pcib2: requested I/O range 0xa000-0xa0ff: in range
map[14]: type Memory, range 32, base 0xd0208800, size 8, enabled
pcib2: requested memory range 0xd0208800-0xd02088ff: good
pcib2: matched entry for 2.3.INTA
pcib2: slot 3 INTA hardwired to IRQ 19
found-> vendor=0x104c, dev=0xac54, revid=0x01
domain=0, bus=2, slot=4, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0, size 12, enabled
pcib2: matched entry for 2.4.INTA
pcib2: slot 4 INTA hardwired to IRQ 17
found-> vendor=0x104c, dev=0xac54, revid=0x01
domain=0, bus=2, slot=4, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0003, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0, size 12, enabled
pcib2: matched entry for 2.4.INTB
pcib2: slot 4 INTB hardwired to IRQ 16
found-> vendor=0x104c, dev=0x8201, revid=0x01
domain=0, bus=2, slot=4, func=2
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xa400, size 6, enabled
pcib2: requested I/O range 0xa400-0xa43f: in range
found-> vendor=0x1033, dev=0x0035, revid=0x43
domain=0, bus=2, slot=7, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd0206000, size 12, enabled
pcib2: requested memory range 0xd0206000-0xd0206fff: good
pcib2: matched entry for 2.7.INTA
pcib2: slot 7 INTA hardwired to IRQ 16
found-> vendor=0x1033, dev=0x0035, revid=0x43
domain=0, bus=2, slot=7, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd0207000, size 12, enabled
pcib2: requested memory range 0xd0207000-0xd0207fff: good
pcib2: matched entry for 2.7.INTB
pcib2: slot 7 INTB hardwired to IRQ 18
found-> vendor=0x1033, dev=0x00e0, revid=0x04
domain=0, bus=2, slot=7, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd0208c00, size 8, enabled
pcib2: requested memory range 0xd0208c00-0xd0208cff: good
pcib2: matched entry for 2.7.INTC
pcib2: slot 7 INTC hardwired to IRQ 19
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem
0xd0208000-0xd02087ff,0xd0200000-0xd0203fff irq 16 at device 0.0 on
pci2
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd0208000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 4c:3f:02:00:7d:30:40:58
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x46818000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 4e:3f:02:30:40:58
fwe0: bpf attached
fwe0: Ethernet address: 4e:3f:02:30:40:58
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 4c:3f:02:00:7d:30:40:58 @ 0xfffe00000000,
S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
pci2: <network> at device 2.0 (no driver attached)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa000
pcib2: rl0 requested I/O range 0xa000-0xa0ff: in range
pcib2: rl0 requested I/O range 0xa000-0xa0ff: in range
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem
0xd0208800-0xd02088ff irq 19 at device 3.0 on pci2
pcib2: rl0 requested I/O range 0xa000-0xa0ff: in range
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:0f:b0:45:d3:e3
rl0: [MPSAFE]
rl0: [ITHREAD]
cbb0: <PCI-CardBus Bridge> irq 17 at device 4.0 on pci2
pcib2: cbb0 requested memory range 0xd0200000-0xd02fffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0209000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 53
cbb0: [MPSAFE]
cbb0: [ITHREAD]
cbb0: PCI Configuration space:
0x00: 0xac54104c 0x02100007 0x06070001 0x00824008
0x10: 0xd0209000 0x020000a0 0x40040302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400111
0x40: 0x006b103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08449061 0x10000019 0x00030006 0x01111d22
0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <PCI-CardBus Bridge> irq 16 at device 4.1 on pci2
pcib2: cbb1 requested memory range 0xd0200000-0xd02fffff: good
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd020a000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: [ITHREAD]
cbb1: PCI Configuration space:
0x00: 0xac54104c 0x02100007 0x06070001 0x00824008
0x10: 0xd020a000 0x020000a0 0x40060502 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400210
0x40: 0x006b103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08449161 0x10000019 0x00030006 0x01111d22
0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci2: <base peripheral> at device 4.2 (no driver attached)
ohci2: <NEC uPD 9210 USB controller> mem 0xd0206000-0xd0206fff irq 16
at device 7.0 on pci2
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0206000
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 3 ports with 3 removable, self powered
ohci3: <NEC uPD 9210 USB controller> mem 0xd0207000-0xd0207fff irq 18
at device 7.1 on pci2
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0207000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 54
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <NEC uPD 9210 USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xd0208c00-0xd0208cff
irq 19 at device 7.2 on pci2
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xd0208c00
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 3 ports each: usb2 usb3
usb4: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 5 ports with 5 removable, self powered
pci0: <multimedia, audio> at device 20.5 (no driver attached)
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: strange result for test aux port (3).
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <floppy drive controller> on acpi0
fdc0: No FDOUT register!
device_attach: fdc0 attach returned 6
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
fdc0: <floppy drive controller> on acpi0
fdc0: No FDOUT register!
device_attach: fdc0 attach returned 6
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcefff,0xd0000-0xd5fff,0xd6000-0xd6fff,0xd7000-0xd77ff pnpid
ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 57
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1003 0x1003 0x1003 0x1003
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1003 0x1003 0x1003 0x1003
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1003 0x1003 0x1003 0x1003
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> on uhub2
ums0: 3 buttons and Z dir.
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 100003992 hz
Timecounter "TSC" frequency 3000119670 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
rr232x: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on IXP200 chip
ad0: setting UDMA100 on IXP200 chip
ad0: 76319MB <TOSHIBA MK8032GAX AD001A> at ata0-master UDMA100
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
acpi_acad0: acline initialization start
battery0: battery initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization done, tried 1 times
ad0: Silicon Image check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on IXP200 chip
acd0: <HL-DT-ST DVD-RW GWA-4080N/0C09> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xab93 (0)
kbdc: RESET_KBD return code:0098
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
More information about the freebsd-mobile
mailing list