ath: unable to attach hardware; HAL status 3; attach returned 6

[Ashish Shukla आशीष शुक्ल]

Ian  writes:
> Goal:
> to have Wireless Atheros based NIC run on my Sony Vaio

> Background:

> The computer in question is a Sony Vaio PCG R505-JL w/ slimdock. The CD-ROM
> is broken.
> I used a second computer and installed it on the second computer, then
> transfered the
> hard drive to the vaio.

> This problem is not present on the computer I installed it on. The card
> works Out-of box.

> dmesg output:

[snip]

> ath0: <Atheros 2413> mem 0xf4110000-0xf411ffff irq 9 at device 0.0 on
> cardbus0
> ath0: [ITHREAD]
> ath0: unable to attach hardware; HAL status 3
> device_attach: ath0 attach returned 6

Above output indicates, wireless chip not accepting the HAL
firmware. You can try the latest HAL available from following URL:

http://people.freebsd.org/~sam/ath_hal-20080528.tgz

HTH
Ashish Shukla
-- 
·-- ·- ···· ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- --
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-mobile/attachments/20080813/e0da22de/attachment.pgp