Dial-up Networking with Verizon and Treo
Kevin Oberman
oberman at es.net
Sun Apr 27 03:35:35 UTC 2008
> From: "Tuc at T-B-O-H.NET" <ml at t-b-o-h.net>
> Date: Fri, 25 Apr 2008 22:43:09 -0400 (EDT)
>
> >
> > I have a Verizon Wireless Palm 755p with which I can connect my laptop
> > to the Internet under Windows. I would really like to be able to do this
> > under FreeBSD, but I have no idea of what the appropriate USB driver
> > would be or how PPP would be configured for it. The Verizon software
> > does not even have an account name or password for the connection.
> >
> > Has anyone managed to get this to work? I suspect any Treo on Verizon
> > would connect in much the same manner.
> >
> I've tried a few times to get the Treos recognized in the OS,
> if your running a fairly new version it should be in there. It'll
> show up on ucom0 .
>
> When I ran USB, I put in /etc/ppp/pp.conf :
>
> vzwenusb:
> set phone "#777"
> set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
> \"\" AT OK-AT-OK ATZ OK AT\$QCMDR=3 OK AT\$QCQNC=0 OK \\dATDT\\T TIM
> EOUT 40 CONNECT"
> set authname 9175555505 at vzw3g.com
> set authkey vzw
> set device /dev/ucom0
> set speed 230400
> add default HISADDR
>
>
> Then invoke
>
> /usr/sbin/ppp -ddial vzwenusb
>
>
> I've also done it with bluetooth.
>
> In /etc/rc.local :
>
> /etc/rc.bluetooth start ubt0
> /usr/sbin/sdpd
> /usr/local/bin/sdptool add DUN
> /usr/sbin/rfcomm_pppd -s -C 1 -l rfcomm-server
> /sbin/sysctl net.inet.ip.forwarding=1
> /sbin/ipnat -C
> /sbin/ipnat -f /usr/local/etc/rfcomm_ppd.nat.conf
>
> (I think there was something special about the sdptool I
> used, it was from sdp-1.5, maybe even with a modification from
> one of the list people...)
>
> In /etc/ppp/ppp.conf :
>
> rfcomm-server:
> set timeout 0
> set lqrperiod 60
> set ifaddr 10.0.0.1 10.0.0.2 255.255.255.0
> enable lqr
> accept lqr
> # Do not use PPP authentication. Assume that
> # Bluetooth connection was authenticated already
> disable pap
> deny pap
> disable chap
> deny chap
> # Added by Tuc
> enable dns
>
>
> In /usr/local/etc/rfcomm_ppd.nat.conf:
>
> map wi0 10.0.0.2/32 -> 0/32 portmap tcp/udp auto
> map wi0 10.0.0.2/32 -> 0/32
>
>
> You'll need to change the interface as appropriate.
>
> Tuc
Thanks for the suggestions, but no joy.
I have not tried BT, but the USB idea is getting nowhere, so far.
First, the Treo is detected just fine, but the devices created are cuaU0
and ttyU0, not ucom0. I tried those, but had no success in getting the
Treo to dial. I just get an error setting the speed to 0. I tried
connecting to the port with kermit, but I could not get it to respond at
all.
Any other ideas? Guess I'll try the BT next.
Thanks again for taking the time to help.
--
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman at es.net Phone: +1 510 486-8634
Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 224 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-mobile/attachments/20080427/223f03d0/attachment.pgp
More information about the freebsd-mobile
mailing list