Management of Thermal
Norberto Meijome
freebsd at meijome.net
Thu Oct 11 08:02:50 PDT 2007
On Mon, 08 Oct 2007 15:41:16 +0200
Lars Engels <lme at FreeBSD.org> wrote:
> Do you have Windows installed on that Notebook? How warm does the CPU
> get there? Or with a Linux live CD?
hey :)
trying to follow up each suggestion as it arrived....
I tried Knoppix (5.1.1, 2007-01-04, kernel 2.6.19, after trying with knoppix
3.8 and realising it was a bit old...though not that much after all).
My knowledge of linux's default support is a bit
limited - it seems cpu throttling (the equivalent of powerd) is not enabled by
default, so the core temperature in my laptop was hovering around 80. (compared
to 54 right now under freebsd with some minimal configuration outside of
defaults)
Anyway, I found the following pages which are quite interesting:
http://www.thinkwiki.org/wiki/How_to_control_fan_speed ThinkPad Z60t, Z60m (fan
levels RPM: 1-2 = ~1700, 3-5 = ~2800, 6-7 = ~3500)
http://forum.thinkpads.com/viewtopic.php?p=158780&sid=f35af9a2972edda7460c433ffa75e75e
refers to pushing fans to 4.5K, and to what normal behaviour is
https://sourceforge.net/project/showfiles.php?group_id=153962 referred from the
previous post
http://www.thinkwiki.org/wiki/How_to_control_fan_speed
the last one was a great one. It describes the latest support for fan control
in linux' acpi_ibm. Including how to enable it in experimental mode for older
kernels (such as the one Knoppix runs). so, i tried this :
http://www.thinkwiki.org/wiki/How_to_control_fan_speed#Using_a_stock_kernel
and it worked a treat.
The fan kicked off nicely... and seriously aggressively
when disengaged (similar to how the fan goes when you just power up the laptop).
So it seems these guys + gals @ penguin land are onto something good.
Does anyone know if their work can be leveraged for *BSD ? or maybe this
support is already in -CURRENT?
Cheers,
B
_________________________
{Beto|Norberto|Numard} Meijome
"Build a system that even a fool can use, and only a fool will want to use it."
George Bernard Shaw
I speak for myself, not my employer. Contents may be hot. Slippery when wet.
Reading disclaimers makes you go blind. Writing them is worse. You have been
Warned.
More information about the freebsd-mobile
mailing list