unable to map IRQ for my pccard

[M. Warner Losh]

In message: <200707101518.59366.jhb at freebsd.org>
            John Baldwin <jhb at freebsd.org> writes:
: On Sunday 08 July 2007 08:54:40 pm Zhang Weiwu wrote:
: > >  > cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20822000-0x20822fff at
: > >  > device 2.0 on pci0 pccard0: <16-bit PCCard bus> on cbb0
: > >  > cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20821000-0x20821fff at
: > >  > device 2.1 on pci0 pccard1: <16-bit PCCard bus> on cbb1
: > >  > $PIR: ROUTE_INTERRUPT failed.
: > >  > cbb: Unable to map IRQ...
: > >  > device_attach: cbb1 attach returned 12
: 
: We tried to set the IRQ for your device and the BIOS choked.  Can you get the 
: output from /usr/src/tools/tools/pirtool for your machine?

Once upon a time, I encountered many BIOSes that would happily map the
first interrupt on an interrupt pin at the PIC.  Further ones would
result in an error, so I made the code ignore errors all the time.
Looks like they are no longer ignored.  I never found out if ignoring
the error was OK or not, since the documentation was a bit thin in
that area.

Warner