Toshiba G900 Pocket PC

[Andrey Mikhailov]

Is it possible to add support for this device ?


# udesc_dump /dev/ugen0
Standard Device Descriptor:
  bLength            18
  bDescriptorType    01
  bcdUSB             0200
  bDeviceClass       ef
  bDeviceSubClass    01
  bDeviceProtocol    01
  bMaxPacketSize     16
  idVendor           0930
  idProduct          0d29
  bcdDevice          0000
  iManufacturer      1
  iProduct           2
  iSerialNumber      3
  bNumConfigurations 1

Configuration 0:
        Standard Configuration Descriptor:
          bLength             9
          bDescriptorType     02
          wTotalLength        62
          bNumInterface       2
          bConfigurationValue 1
          iConfiguration      0
          bmAttributes        c0 (self-powered)
          bMaxPower           250 (500 mA)

        Standard Interface Descriptor:
          bLength            9
          bDescriptorType    04
          bInterfaceNumber   0
          bAlternateSetting  0
          bNumEndpoints      1
          bInterfaceClass    ef
          bInterfaceSubClass 01
          bInterfaceProtocol 01
          iInterface         0

                Descriptor:
                  bLength            5
                  bDescriptorType    24
                  bDescriptorSubtype 01
                05 24 01 00 01

                Descriptor:
                  bLength            4
                  bDescriptorType    24
                  bDescriptorSubtype 02
                04 24 02 00

                Descriptor:
                  bLength            5
                  bDescriptorType    24
                  bDescriptorSubtype 02
                05 24 02 00 01

        Standard Endpoint Descriptor:
          bLength          7
          bDescriptorType  05
          bEndpointAddress 81 (in)
          bmAttributes     03 (Interrupt)
          wMaxPacketSize   8
          bInterval        1

        Standard Interface Descriptor:
          bLength            9
          bDescriptorType    04
          bInterfaceNumber   1
          bAlternateSetting  0
          bNumEndpoints      2
          bInterfaceClass    0a
          bInterfaceSubClass 00
          bInterfaceProtocol 00
          iInterface         0

        Standard Endpoint Descriptor:
          bLength          7
          bDescriptorType  05
          bEndpointAddress 82 (in)
          bmAttributes     02 (Bulk)
          wMaxPacketSize   64
          bInterval        0

        Standard Endpoint Descriptor:
          bLength          7
          bDescriptorType  05
          bEndpointAddress 03 (out)
          bmAttributes     02 (Bulk)
          wMaxPacketSize   64
          bInterval        0

Codes Representing Languages by the Device:
  bLength          4
  bDescriptorType  03
  wLANGID[0]       0409

String (index 1): Toshiba Corporation

String (index 2): Toshiba RNDIS

String (index 3): e6461300-3205-0801-3804-0dd0120906ff


And when I put em to mass storage mode i got the following message in dmesg
umass0: <Generic Manufacturer (PROTOTYPE--Remember to change idVendor) 
Generic Mass Storage (PROTOTYPE--Remember to change idVendor), class 
0/0, rev 2.00/0.00, addr 3> on uhub2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <  > Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 1964MB (4022272 512 byte sectors: 255H 63S/T 250C)


dmesg -a
FreeBSD fusion 7.0-BETA2 FreeBSD 7.0-BETA2 #11: Wed Nov  7 19:35:15 EET 
2007     root at fusion:/.1/.bsdstaff/obj/.1/.bsdstaff/src/sys/ZLOVRED  i386

Thanks in advance.