wpa and PRISM 2.5

[Sam Leffler]

Kevin Oberman wrote:
>> I can't get my PRISM-card to work with wpa. It is a minipci-card included
>> in my Thinkpad T30, wi driver:
>>
>> wi0 at pci2:2:0:   class=0x028000 card=0x25138086 chip=0x38731260 rev=0x01 
>> hdr=0x00
>>     vendor   = 'Intersil Americas Inc (Was: Harris Semiconductor)'
>>     device   = 'PRISM 2.5 802.11b 11Mbps Wireless Controller'
>>     class    = network
>>
>> I use FreeBSD 6.1-RELEASE, and has a simple WPA-PSK setup on my ap.
>>
>> Anyone have this working?
> 
> What is the firmware version? (It's in the dmesg.) Only newer versions of the 
> firmware have any chance of supporting WPA.
> 
> Also, make sure that you have the wlan_tkip module loaded if you expect to use 
> TKIP.

No wpa support for wi.

	Sam