Acer Aspire AS5672 - network card not properly detected
Torfinn Ingolfsen
torfinn.ingolfsen at broadpark.no
Sat Jul 15 02:10:59 UTC 2006
Hello,
I got a brand new laptop; an Acer Aspire AS5672WLMI. It has an
Intel Core Dua, 2GB memory and lots of good stuff. Network-wise it has
a Broadcom BCM5789 nic, and the wlan card is supposed to be an Intel
Pro/Wireless 3945ABG.
I have just finished installing FreeBSD 6.1-RELEASE on it.
Unfortunately, none of the network cards are properly detected. The
wlan card isn't reported in dmesg output at all.
I also tried a couple of PCcard nic's I have, but it seems that
the machine also have issues with those.
This leaves the machine offline, which is not good.
dmesg output and output from 'pciconf -lv' attached.
Any hints on what I can do to fix it so that I get the machine online
will be accepted gratefully.
--
Regards,
Torfinn Ingolfsen,
Norway
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May 7 04:42:56 UTC 2006
root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU T2250 @ 1.73GHz (1733.41-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc189<SSE3,MON,EST,TM2,<b14>,<b15>>
AMD Features=0x100000<NX>
Cores per package: 2
real memory = 2145910784 (2046 MB)
avail memory = 2094915584 (1997 MB)
ACPI APIC Table: <INTEL CALISTGA>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD RSDT> on motherboard
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e000 StartNode 0xc642e000 ReturnNode 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5789 Gigabit Ethernet, ASIC rev. 0x4201> irq 18 at device 0.0 on pci4
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xc8004000-0xc80043ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: OEM Camera, rev 2.00/1.00, addr 2
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> mem 0xc8404000-0xc8404fff irq 20 at device 9.0 on pci10
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xc8405000-0xc84057ff,0xc8400000-0xc8403fff irq 20 at device 9.1 on pci10
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:9a:84:d3
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:9a:84:d3
fwe0: Ethernet address: 02:c0:9f:9a:84:d3
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci10: <mass storage> at device 9.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 3 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
Searad0: 114473MB <SAMSUNG HM120JI YF100-10> at ata0-master UDMA33
chNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
acd0: DVDR <MATSHITADVD-RAM UJ-845S/D201> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s3a
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ed1: <Billionton LNA-100B> at port 0x300-0x31f irq 20 function 0 config 7 on pccard0
ed1: ccr_write of 0 to 0xa (0x3c0)
ed1: ccr_write of 0x3 to 0xc (0x3c0)
ed1: ccr_write of 0x4 to 0x2 (0x3c0)
ed1: Ethernet address: 00:10:60:f3:31:04
ed1: type AX88790 (16 bit)
miibus0: <MII bus> on ed1
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy1: <Generic IEEE 802.3u media interface> on miibus0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy2: <Generic IEEE 802.3u media interface> on miibus0
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy3: <Generic IEEE 802.3u media interface> on miibus0
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy4: <Generic IEEE 802.3u media interface> on miibus0
ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy5: <Generic IEEE 802.3u media interface> on miibus0
ukphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy6: <Generic IEEE 802.3u media interface> on miibus0
ukphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy7: <Generic IEEE 802.3u media interface> on miibus0
ukphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy8: <Generic IEEE 802.3u media interface> on miibus0
ukphy8: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy9: <Generic IEEE 802.3u media interface> on miibus0
ukphy9: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy10: <Generic IEEE 802.3u media interface> on miibus0
ukphy10: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy11: <Generic IEEE 802.3u media interface> on miibus0
ukphy11: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy12: <Generic IEEE 802.3u media interface> on miibus0
ukphy12: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy13: <Generic IEEE 802.3u media interface> on miibus0
ukphy13: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy14: <Generic IEEE 802.3u media interface> on miibus0
ukphy14: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy15: <Generic IEEE 802.3u media interface> on miibus0
ukphy15: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy16: <Generic IEEE 802.3u media interface> on miibus0
ukphy16: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed1: link state changed to DOWN
ukphy0: detached
ukphy1: detached
ukphy2: detached
ukphy3: detached
ukphy4: detached
ukphy5: detached
ukphy6: detached
ukphy7: detached
ukphy8: detached
ukphy9: detached
ukphy10: detached
ukphy11: detached
ukphy12: detached
ukphy13: detached
ukphy14: detached
ukphy15: detached
ukphy16: detached
miibus0: detached
ed1: detached
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
cbb alloc res fail
cardbus0: Can't get memory for IO ports
xl0: <3Com 3c575B Fast Etherlink XL> port 0-0x7f mem 0xc8407000-0xc840707f,0xc8408000-0xc840807f at device 0.0 on cardbus0
cbb alloc res fail
xl0: couldn't map ports/memory
device_attach: xl0 attach returned 6
ed1: <Billionton LNA-100B> at port 0x300-0x31f irq 20 function 0 config 7 on pccard0
ed1: ccr_write of 0 to 0xa (0x3c0)
ed1: ccr_write of 0x3 to 0xc (0x3c0)
ed1: ccr_write of 0x4 to 0x2 (0x3c0)
ed1: Ethernet address: 00:10:60:f3:31:04
ed1: type AX88790 (16 bit)
miibus0: <MII bus> on ed1
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy1: <Generic IEEE 802.3u media interface> on miibus0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy2: <Generic IEEE 802.3u media interface> on miibus0
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy3: <Generic IEEE 802.3u media interface> on miibus0
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy4: <Generic IEEE 802.3u media interface> on miibus0
ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy5: <Generic IEEE 802.3u media interface> on miibus0
ukphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy6: <Generic IEEE 802.3u media interface> on miibus0
ukphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy7: <Generic IEEE 802.3u media interface> on miibus0
ukphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy8: <Generic IEEE 802.3u media interface> on miibus0
ukphy8: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy9: <Generic IEEE 802.3u media interface> on miibus0
ukphy9: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy10: <Generic IEEE 802.3u media interface> on miibus0
ukphy10: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy11: <Generic IEEE 802.3u media interface> on miibus0
ukphy11: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy12: <Generic IEEE 802.3u media interface> on miibus0
ukphy12: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy13: <Generic IEEE 802.3u media interface> on miibus0
ukphy13: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy14: <Generic IEEE 802.3u media interface> on miibus0
ukphy14: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy15: <Generic IEEE 802.3u media interface> on miibus0
ukphy15: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy16: <Generic IEEE 802.3u media interface> on miibus0
ukphy16: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed1: link state changed to DOWN
ukphy0: detached
ukphy1: detached
ukphy2: detached
ukphy3: detached
ukphy4: detached
ukphy5: detached
ukphy6: detached
ukphy7: detached
ukphy8: detached
ukphy9: detached
ukphy10: detached
ukphy11: detached
ukphy12: detached
ukphy13: detached
ukphy14: detached
ukphy15: detached
ukphy16: detached
miibus0: detached
ed1: detached
module_register: module bge/miibus already exists!
Module bge/miibus failed to register: 17
module_register: module pci/bge already exists!
Module pci/bge failed to register: 17
-------------- next part --------------
hostb0 at pci0:0:0: class=0x060000 card=0x00941025 chip=0x27a08086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000088 chip=0x27a18086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
none0 at pci0:27:0: class=0x040300 card=0x00941025 chip=0x27d88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) High Definition Audio'
class = multimedia
pcib2 at pci0:28:0: class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib3 at pci0:28:1: class=0x060400 card=0x00000040 chip=0x27d28086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:28:2: class=0x060400 card=0x00000040 chip=0x27d48086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib5 at pci0:28:3: class=0x060400 card=0x00000040 chip=0x27d68086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCI Express Root Port'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x00941025 chip=0x27c88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x00941025 chip=0x27c98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2 at pci0:29:2: class=0x0c0300 card=0x00941025 chip=0x27ca8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3 at pci0:29:3: class=0x0c0300 card=0x00941025 chip=0x27cb8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
ehci0 at pci0:29:7: class=0x0c0320 card=0x00941025 chip=0x27cc8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib6 at pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xe2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x00941025 chip=0x27b98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM (ICH7-M) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:2: class=0x010180 card=0x00941025 chip=0x27c48086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller'
class = mass storage
subclass = ATA
none1 at pci0:31:3: class=0x0c0500 card=0x00941025 chip=0x27da8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) SMBus Controller'
class = serial bus
subclass = SMBus
none2 at pci1:0:0: class=0x030000 card=0x00941025 chip=0x71c51002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
class = display
subclass = VGA
none3 at pci3:0:0: class=0x028000 card=0x10018086 chip=0x42228086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
class = network
bge0 at pci4:0:0: class=0x020000 card=0x00941025 chip=0x169d14e4 rev=0x21 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5789 NetLink Gigabit Ethernet PCI Express'
class = network
subclass = ethernet
cbb0 at pci10:9:0: class=0x060700 card=0x00941025 chip=0x8039104c rev=0x00 hdr=0x02
vendor = 'Texas Instruments (TI)'
class = bridge
subclass = PCI-CardBus
fwohci0 at pci10:9:1: class=0x0c0010 card=0x00941025 chip=0x803a104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
class = serial bus
subclass = FireWire
none4 at pci10:9:2: class=0x018000 card=0x00941025 chip=0x803b104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
class = mass storage
More information about the freebsd-mobile
mailing list