6.0-STABLE, iwi0, wpa_supplicant and WEP networks...

Peter Losher plosher-keyword-freebsd.a36e57 at plosh.net
Fri Jan 6 20:22:26 PST 2006


I have had this Dell Insprion 700m for six months now, and the only 
thing I have yet to get working on a regular basis (other than the 
integrated SecureDigital card reader) is the integrated Intel Centrino 
Wireless support:

-=-
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xe0206000-0xe0206fff irq 10 
at device 1.0 on pci2
-=-

I am able for the most part to get it working with my WPA network at 
work using wpa_supplicant (I have noticed that it can't change to a 
closer access point, and tends to disassociate first)  However, at 
home, where I have no WAP or WEP, wpa_supplicant j:ust times out when 
associating with my home network (ploshnet) with the kernel spitting 
out numerous:

iwi0: fatal error

messages.  Here is a debug.log snippet from wpa_supplicant:
-=-
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Received 0 bytes of scan results (4 BSSes)
Scan results: 6
Selecting BSS from priority group 0
0: 00:90:4c:71:10:2d ssid='ploshnet' wpa_ie_len=0 rsn_ie_len=0
   skip - no WPA/RSN IE
1: 00:0f:66:41:a7:4b ssid='Gendotti' wpa_ie_len=0 rsn_ie_len=0
   skip - no WPA/RSN IE
2: 00:12:17:0e:fc:5b ssid='Zion' wpa_ie_len=0 rsn_ie_len=0
   skip - no WPA/RSN IE
3: 00:12:88:e0:67:71 ssid='2WIRE888' wpa_ie_len=0 rsn_ie_len=0
   skip - no WPA/RSN IE
   selected non-WPA AP 00:90:4c:71:10:2d ssid='ploshnet'
Trying to associate with 00:90:4c:71:10:2d (SSID='ploshnet' 
freq=2412 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=0
wpa_driver_bsd_associate: ssid 'TARDISnet Mark III' wpa ie len 0 
pairwise 0 group 0 key mgmt 2
wpa_driver_bsd_associate: set PRIVACY 0
Setting authentication timeout: 5 sec 0 usec
^?Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:00:00:00:00:00 blacklist count incremented to 3
No keys have been configured - skip key clearing
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
[...]
-=-

I have a trusty Atheros card that works just fine w/ the same 
wpa_supplicant.conf file, so I don't think the problem lies there.

Any ideas on where to go next?

Best WIshes - Peter
-- 
[ http://www.plosh.net/ ] - "Earth Halted: Please reboot to continue"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-mobile/attachments/20060106/950e8e07/attachment.bin


More information about the freebsd-mobile mailing list