Fujitsu P7010 drm problems.

[John Baldwin]

On Sunday 01 January 2006 03:43 pm, Peter Ankerstål wrote:
> I want to enable direct renering on my Fujitsu Siemens P7010PM but when I
> include the i915drm to the kernel I get the following messages at
> boot-time:
>
> drmsub0: <Intel i852GM/i855GM GMCH> port 0x2430-0x2437 mem
> 0xd8000000-0xdfffffff ,0xd0000000-0xd007ffff irq 11 at device 2.0 on pci0
> error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize
> AGP. device_attach: drmsub0 attach returned 12
> drmsub1: <Intel i852GM/i855GM GMCH> mem
> 0xe0000000-0xe7ffffff,0xd0080000-0xd00ff fff at device 2.1 on pci0
> error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize
> AGP. device_attach: drmsub1 attach returned 12
>
> Huh, really? THIS is the message I get when I don't have the i915drm in the
> kernel:
>
> agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0x2430-0x2437 mem
> 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 11 at device 2.0 on pci0
> detected 8060k stolen memory
> aperture size is 128M
>
> So, what I want to do is to "steal" more memory to enable drm and dri.
> What could be the problem?

This is fixed in HEAD.  I think the quick hack that might work is to change 
the i915_drm.c file to attach to drmsub rather than pci in the 
DRIVER_MODULE() line.

-- 
John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org