D-Link DWL-G650+ wireless pccard with ndis
Hrant Dadivanyan
ran at styx.aic.net
Mon Feb 20 00:44:50 PST 2006
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello,
I'm trying to setup D-Link DWL-G650+ wireless 802.11b/g card on laptop with
6.1-PRERELEASE cvsuped on yesterday, but without success. The laptop is
Sony Vaio GR300, the card is based on TI chip (0x9066) and not Atheros one.
There is some external work on driver for this family of chips (project
acx100), but this one isn't supported yet, so the only choice left is ndis.
Mailing lists give some success stories, but...
ndisgen GPlus.ins GPlus.sys (WinXP ones) produces GPlus_sys.ko module that
as soon as I try to load with card inserted or in reverse order freezes
the system. After changing HDD to one with WinXP and installing the same
drivers wireless works excellent.
The next thing I did - removed CPU type and flags from make.conf and tryed
with GENERIC kernel with the same results.
Verbose dmesg of GENERIC in both cases - with and without the card and
pciconf -lv are attached. kldstat and the message before the freeze are
included below (the message is manually written, because there is no serial
port on laptop).
Any help is apreciated.
Thank you,
Hrant
# kldstat
Id Refs Address Size Name
1 11 0xc0400000 656bb0 kernel
2 2 0xc0a57000 ca80 if_ndis.ko
3 3 0xc0a64000 1753c ndis.ko
4 1 0xc0a7c000 494b8 GPlus.ko
5 1 0xc0ac6000 58570 acpi.ko
pcib2: (null) requested memory range 0xd0200000-0xd02fffff: good
unknown: Lazy allocation of 0x20000 bytes rid 0x14 type 3 at 0xd0220000
cardbus0: Expecting link target, got 0x58
map[10]: type 1, range 32, base 00000000, size 13, enabled
pcib2: (null) requested memory range 0xd0200000-0xd02fffff: good
map[14]: type 1, range 32, base d0220000, size 17, enabled
pcib2: (null) requested memory range 0xd0220000-0xd023ffff: good
found-> vendor=0x104c, dev=0x9066, revid=0x00
bus=3, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
ndis0: <D-Link AirPlus XtremeG+ DWL-G650+ Wireless Cardbus Adapter> mem 0xd0220000-0xd023ffff,0xd0208000-0xd0209fff at device 0.0 on cardbus0
ndis0: Reserved 0x20000 bytes for rid 0x14 type 3 at 0xd0220000
ndis0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xd0208000
ndis0: [MPSAFE]
ndis0: NDIS API version: 5.1
- --
Hrant Dadivanyan (aka Ran d'Adi) ran(at)amnic.net
/* "Feci quod potui, faciant meliora potentes." */ ran(at)styx.aic.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (FreeBSD)
iQCVAwUBQ/mBZgxkJ3pY74jlAQIqhwP7BytAdj36+dd3V2t9QvDLTAgbcRNIokvn
C5LaFLpoz0MuK0Gf9Bx5q/jfo/QC2fq5Ov4K4Vv+UD9ztZjz/Jw/ZYbtJWO3n4CY
nBoq0gIIrD6QLU8IDqZ+c2AFm4yFmSNX9IAZsDjGI+BOICcwMsR6QxjkN8oPRIF9
CjCoCxWY7HA=
=tHz3
-----END PGP SIGNATURE-----
-------------- next part --------------
# pciconf -lv (with card, without ndis modules):
agp0 at pci0:0:0: class=0x060000 card=0x80e7104d chip=0x35758086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82830[MP] Host-Hub I/F Bridge / SDRAM Controller'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000000 chip=0x35768086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82830M/MP CPU to AGP Bridge'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x80e7104d chip=0x24828086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x80e7104d chip=0x24848086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller'
class = serial bus
subclass = USB
uhci2 at pci0:29:2: class=0x0c0300 card=0x80e7104d chip=0x24878086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller'
class = serial bus
subclass = USB
pcib2 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x41 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM LPC Interface or ISA bridge: see Notes'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:1: class=0x01018a card=0x80e7104d chip=0x248a8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller'
class = mass storage
subclass = ATA
none0 at pci0:31:3: class=0x0c0500 card=0x80e7104d chip=0x24838086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) SMBus Controller'
class = serial bus
subclass = SMBus
none1 at pci0:31:5: class=0x040100 card=0x80e7104d chip=0x24858086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller'
class = multimedia
subclass = audio
none2 at pci0:31:6: class=0x070300 card=0x80e7104d chip=0x24868086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller'
class = simple comms
subclass = generic modem
none3 at pci1:0:0: class=0x030000 card=0x80e7104d chip=0x4c591002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Mobility 6 Radeon Mobility M6 LY'
class = display
subclass = VGA
fwohci0 at pci2:2:0: class=0x0c0010 card=0x80e7104d chip=0x8021104c rev=0x02 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'TSB43AA22 1394a-2000 OHCI PHY/Link Layer Ctrlr'
class = serial bus
subclass = FireWire
cbb0 at pci2:5:0: class=0x060700 card=0x80e7104d chip=0x04761180 rev=0x80 hdr=0x02
vendor = 'Ricoh Co Ltd'
device = 'RL5c476 CardBus Controller'
class = bridge
subclass = PCI-CardBus
cbb1 at pci2:5:1: class=0x060700 card=0x80e7104d chip=0x04761180 rev=0x80 hdr=0x02
vendor = 'Ricoh Co Ltd'
device = 'RL5c476 CardBus Controller'
class = bridge
subclass = PCI-CardBus
fxp0 at pci2:8:0: class=0x020000 card=0x80e7104d chip=0x10318086 rev=0x41 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM (ICH3) PRO/100 VE (LOM) Network Connection'
class = network
subclass = ethernet
none4 at pci3:0:0: class=0x028000 card=0x3b051186 chip=0x9066104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'TNETW1130(ACX111) 802.11b/g Wireless Cardbus/PCI Adapter'
class = network
# dmesg (with card, without ndis modules):
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Sun Feb 19 20:37:11 AMT 2006
hrant at dadivanyan.net:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ab1000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ab11bc.
Calibrating clock(s) ... i8254 clock: 1193162 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 994258768 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz (994.26-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536346624 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f5c1fff, 513396736 bytes (125341 pages)
0x000000001ff00000 - 0x000000001ff77fff, 491520 bytes (120 pages)
avail memory = 515416064 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6d00
bios32: Entry = 0xfd871 (c00fd871) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd870+0x13a
pnpbios: Found PnP BIOS data at 0xc00f6d30
pnpbios: Entry = f0000:a456 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY C0> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 2 5 A 0x69 3
embedded 2 8 A 0x68 9
embedded 0 29 A 0x60 9
embedded 0 29 B 0x63 9
embedded 0 2 A 0x60 9
embedded 0 1 A 0x60 9
AcpiOsDerivePciId: bus 1 dev 0 func 0
acpi0: [MPSAFE]
AcpiOsDerivePciId: bus 2 dev 5 func 0
AcpiOsDerivePciId: bus 2 dev 5 func 1
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
acpi_ec0: info: new max delay is 20 us
acpi_ec0: info: new max delay is 100 us
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.29.INTA at func 0: 9
ACPI: Found matching pin for 0.29.INTB at func 1: 9
ACPI: Found matching pin for 0.29.INTC at func 2: 255
ACPI: Found matching pin for 0.31.INTB at func 3: 255
ACPI: Found matching pin for 0.31.INTB at func 5: 9
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3575, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x3576, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2482, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[20]: type 4, range 32, base 00001800, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0)
pcib0: slot 29 INTA routed to irq 9 via \\_SB_.LNKA
found-> vendor=0x8086, dev=0x2484, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0)
pcib0: slot 29 INTB routed to irq 9 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x2487, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
map[20]: type 4, range 32, base 00001840, size 5, enabled
found-> vendor=0x8086, dev=0x2448, revid=0x41
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248a, revid=0x01
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001860, size 4, enabled
map[24]: type 1, range 32, base d0000000, size 10, memory disabled
found-> vendor=0x8086, dev=0x2483, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[20]: type 4, range 32, base 00001880, size 5, enabled
found-> vendor=0x8086, dev=0x2485, revid=0x01
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[10]: type 4, range 32, base 00001c00, size 8, port disabled
map[14]: type 4, range 32, base 000018c0, size 6, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x2486, revid=0x01
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[10]: type 4, range 32, base 00002400, size 8, port disabled
map[14]: type 4, range 32, base 00002000, size 7, enabled
agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 228M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xd0100000-0xd01fffff
pcib1: prefetched decode 0xd8000000-0xdfffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 9
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4c59, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base d8000000, size 27, enabled
pcib1: (null) requested memory range 0xd8000000-0xdfffffff: good
map[14]: type 4, range 32, base 00003000, size 8, enabled
pcib1: (null) requested I/O range 0x3000-0x30ff: in range
map[18]: type 1, range 32, base d0100000, size 16, enabled
pcib1: (null) requested memory range 0xd0100000-0xd010ffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA:0)
pcib1: slot 0 INTA routed to irq 9 via \\_SB_.LNKA
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0)
pci_link2: Picked IRQ 9 with weight 8
pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x4000-0x4fff
pcib2: memory decode 0xd0200000-0xd02fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
ACPI: Found matching pin for 2.2.INTA at func 0: 255
ACPI: Found matching pin for 2.5.INTA at func 0: 3
pci_link5: BIOS IRQ 3 for 2.5.INTA is invalid
ACPI: Found matching pin for 2.5.INTB at func 1: 255
ACPI: Found matching pin for 2.8.INTA at func 0: 9
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x104c, dev=0x8021, revid=0x02
bus=2, slot=2, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base d0205000, size 11, enabled
pcib2: (null) requested memory range 0xd0205000-0xd02057ff: good
map[14]: type 1, range 32, base d0200000, size 14, enabled
pcib2: (null) requested memory range 0xd0200000-0xd0203fff: good
found-> vendor=0x1180, dev=0x0476, revid=0x80
bus=2, slot=5, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
pcib2: matched entry for 2.5.INTA (src \\_SB_.LNKF:0)
pci_link5: Picked IRQ 9 with weight 11
pcib2: slot 5 INTA routed to irq 9 via \\_SB_.LNKF
found-> vendor=0x1180, dev=0x0476, revid=0x80
bus=2, slot=5, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x8086, dev=0x1031, revid=0x41
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d0204000, size 12, enabled
pcib2: (null) requested memory range 0xd0204000-0xd0204fff: good
map[14]: type 4, range 32, base 00004000, size 6, enabled
pcib2: (null) requested I/O range 0x4000-0x403f: in range
pcib2: matched entry for 2.8.INTA (src \\_SB_.LNKE:0)
pcib2: slot 8 INTA routed to irq 9 via \\_SB_.LNKE
fwohci0: <Texas Instruments TSB43AA22> mem 0xd0205000-0xd02057ff,0xd0200000-0xd0203fff at device 2.0 on pci2
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd0205000
pcib2: matched entry for 2.2.INTA (src \\_SB_.LNKC:0)
pcib2: slot 2 INTA routed to irq 9 via \\_SB_.LNKC
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:46:03:00:d6:a0:ee
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:46:d6:a0:ee
fwe0: bpf attached
fwe0: Ethernet address: 0a:00:46:d6:a0:ee
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
cbb0: <RF5C476 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2
pcib2: cbb0 requested memory range 0xd0200000-0xd02fffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0206000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x06070080 0x00824000
0x10: 0xd0206000 0x020000dc 0x20040302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x04000109
0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a20001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <RF5C476 PCI-CardBus Bridge> at device 5.1 on pci2
pcib2: cbb1 requested memory range 0xd0200000-0xd02fffff: good
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0207000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: matched entry for 2.5.INTB (src \\_SB_.LNKG:0)
pci_link6: Picked IRQ 9 with weight 13
pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x06070080 0x00824000
0x10: 0xd0207000 0x020000dc 0x20060502 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x04000209
0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a20001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0204000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1031 104d 80e7 0041
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 08:00:46:4b:dc:b0
fxp0: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f mem 0xd0000000-0xd00003ff at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x01 err=0x04 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x209 0x219 0x209 0x209
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 1: ioport 0x1c00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
umass0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
umass0:1:0:-1: Attached to scbus1
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 994258768 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
battery1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
pcib2: (null) requested memory range 0xd0200000-0xd02fffff: good
unknown: Lazy allocation of 0x20000 bytes rid 0x14 type 3 at 0xd0220000
cardbus0: Expecting link target, got 0x58
map[10]: type 1, range 32, base 00000000, size 13, enabled
pcib2: (null) requested memory range 0xd0200000-0xd02fffff: good
map[14]: type 1, range 32, base d0220000, size 17, enabled
pcib2: (null) requested memory range 0xd0220000-0xd023ffff: good
found-> vendor=0x104c, dev=0x9066, revid=0x00
bus=3, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
cardbus0: <network> at device 0.0 (no driver attached)
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on ICH3 chip
ad0: setting UDMA100 on ICH3 chip
ad0: 57231MB <IC25N060ATMR04 0 MO3OAD4A> at ata0-master UDMA100
ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH3 chip
acd0: setting UDMA33 on ICH3 chip
acd0: <UJDA710/1.50> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe7:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe7:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe7:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe7:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe7:umass-sim0:0:0:0): (probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe7:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe7:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
Retrying Command (per Sense Data)
(probe7:umass-sim0:0:0:0): Retrying Command
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Sony MSC-U02 1.00> Removable Direct Access SCSI-0 device
pass0: Serial Number 3
pass0: 1.000MB/s transfers
GEOM: new disk da0
ATA PseudoRAID loaded
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony MSC-U02 1.00> Removable Direct Access SCSI-0 device
da0: Serial Number 3
da0: 1.000MB/s transfers
da0: 123MB (253696 512 byte sectors: 64H 32S/T 123C)
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
# dmesg (without card, with ndis modules):
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Sun Feb 19 20:37:11 AMT 2006
hrant at dadivanyan.net:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b20000.
Preloaded elf module "/boot/kernel/if_ndis.ko" at 0xc0b201bc.
Preloaded elf module "/boot/kernel/ndis.ko" at 0xc0b20268.
Preloaded elf module "/boot/kernel.orig/GPlus_sys.ko" at 0xc0b20314.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b203c8.
Calibrating clock(s) ... i8254 clock: 1193164 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 994258333 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz (994.26-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536346624 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f5c1fff, 513396736 bytes (125341 pages)
0x000000001ff00000 - 0x000000001ff77fff, 491520 bytes (120 pages)
avail memory = 515411968 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6d00
bios32: Entry = 0xfd871 (c00fd871) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd870+0x13a
pnpbios: Found PnP BIOS data at 0xc00f6d30
pnpbios: Entry = f0000:a456 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY C0> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 2 5 A 0x69 3
embedded 2 8 A 0x68 9
embedded 0 29 A 0x60 9
embedded 0 29 B 0x63 9
embedded 0 2 A 0x60 9
embedded 0 1 A 0x60 9
AcpiOsDerivePciId: bus 1 dev 0 func 0
acpi0: [MPSAFE]
AcpiOsDerivePciId: bus 2 dev 5 func 0
AcpiOsDerivePciId: bus 2 dev 5 func 1
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
acpi_ec0: info: new max delay is 50 us
acpi_ec0: info: new max delay is 100 us
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.29.INTA at func 0: 9
ACPI: Found matching pin for 0.29.INTB at func 1: 9
ACPI: Found matching pin for 0.29.INTC at func 2: 255
ACPI: Found matching pin for 0.31.INTB at func 3: 255
ACPI: Found matching pin for 0.31.INTB at func 5: 9
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3575, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x3576, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2482, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[20]: type 4, range 32, base 00001800, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0)
pcib0: slot 29 INTA routed to irq 9 via \\_SB_.LNKA
found-> vendor=0x8086, dev=0x2484, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0)
pcib0: slot 29 INTB routed to irq 9 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x2487, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
map[20]: type 4, range 32, base 00001840, size 5, enabled
found-> vendor=0x8086, dev=0x2448, revid=0x41
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248a, revid=0x01
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001860, size 4, enabled
map[24]: type 1, range 32, base d0000000, size 10, memory disabled
found-> vendor=0x8086, dev=0x2483, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[20]: type 4, range 32, base 00001880, size 5, enabled
found-> vendor=0x8086, dev=0x2485, revid=0x01
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[10]: type 4, range 32, base 00001c00, size 8, port disabled
map[14]: type 4, range 32, base 000018c0, size 6, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x2486, revid=0x01
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[10]: type 4, range 32, base 00002400, size 8, port disabled
map[14]: type 4, range 32, base 00002000, size 7, enabled
agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 228M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xd0100000-0xd01fffff
pcib1: prefetched decode 0xd8000000-0xdfffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 9
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4c59, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base d8000000, size 27, enabled
pcib1: (null) requested memory range 0xd8000000-0xdfffffff: good
map[14]: type 4, range 32, base 00003000, size 8, enabled
pcib1: (null) requested I/O range 0x3000-0x30ff: in range
map[18]: type 1, range 32, base d0100000, size 16, enabled
pcib1: (null) requested memory range 0xd0100000-0xd010ffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA:0)
pcib1: slot 0 INTA routed to irq 9 via \\_SB_.LNKA
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0)
pci_link2: Picked IRQ 9 with weight 8
pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x4000-0x4fff
pcib2: memory decode 0xd0200000-0xd02fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
ACPI: Found matching pin for 2.2.INTA at func 0: 255
ACPI: Found matching pin for 2.5.INTA at func 0: 3
pci_link5: BIOS IRQ 3 for 2.5.INTA is invalid
ACPI: Found matching pin for 2.5.INTB at func 1: 255
ACPI: Found matching pin for 2.8.INTA at func 0: 9
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x104c, dev=0x8021, revid=0x02
bus=2, slot=2, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base d0205000, size 11, enabled
pcib2: (null) requested memory range 0xd0205000-0xd02057ff: good
map[14]: type 1, range 32, base d0200000, size 14, enabled
pcib2: (null) requested memory range 0xd0200000-0xd0203fff: good
found-> vendor=0x1180, dev=0x0476, revid=0x80
bus=2, slot=5, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
pcib2: matched entry for 2.5.INTA (src \\_SB_.LNKF:0)
pci_link5: Picked IRQ 9 with weight 11
pcib2: slot 5 INTA routed to irq 9 via \\_SB_.LNKF
found-> vendor=0x1180, dev=0x0476, revid=0x80
bus=2, slot=5, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x8086, dev=0x1031, revid=0x41
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d0204000, size 12, enabled
pcib2: (null) requested memory range 0xd0204000-0xd0204fff: good
map[14]: type 4, range 32, base 00004000, size 6, enabled
pcib2: (null) requested I/O range 0x4000-0x403f: in range
pcib2: matched entry for 2.8.INTA (src \\_SB_.LNKE:0)
pcib2: slot 8 INTA routed to irq 9 via \\_SB_.LNKE
fwohci0: <Texas Instruments TSB43AA22> mem 0xd0205000-0xd02057ff,0xd0200000-0xd0203fff at device 2.0 on pci2
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd0205000
pcib2: matched entry for 2.2.INTA (src \\_SB_.LNKC:0)
pcib2: slot 2 INTA routed to irq 9 via \\_SB_.LNKC
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:46:03:00:d6:a0:ee
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:46:d6:a0:ee
fwe0: bpf attached
fwe0: Ethernet address: 0a:00:46:d6:a0:ee
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
cbb0: <RF5C476 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2
pcib2: cbb0 requested memory range 0xd0200000-0xd02fffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0206000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x06070080 0x00824000
0x10: 0xd0206000 0x020000dc 0x20040302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x04000109
0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a20001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <RF5C476 PCI-CardBus Bridge> at device 5.1 on pci2
pcib2: cbb1 requested memory range 0xd0200000-0xd02fffff: good
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0207000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: matched entry for 2.5.INTB (src \\_SB_.LNKG:0)
pci_link6: Picked IRQ 9 with weight 13
pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x06070080 0x00824000
0x10: 0xd0207000 0x020000dc 0x20060502 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x04000209
0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a20001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0204000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1031 104d 80e7 0041
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 08:00:46:4b:dc:b0
fxp0: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f mem 0xd0000000-0xd00003ff at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x01 err=0x04 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x209 0x219 0x209 0x209
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 1: ioport 0x1c00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
umass0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
umass0:1:0:-1: Attached to scbus1
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 994258333 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
battery1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on ICH3 chip
ad0: setting UDMA100 on ICH3 chip
ad0: 57231MB <IC25N060ATMR04 0 MO3OAD4A> at ata0-master UDMA100
ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH3 chip
acd0: setting UDMA33 on ICH3 chip
acd0: <UJDA710/1.50> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe7:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe7:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe7:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe7:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe7:umass-sim0:0:0:0): (probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe7:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe7:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
Retrying Command (per Sense Data)
(probe7:umass-sim0:0:0:0): Retrying Command
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Sony MSC-U02 1.00> Removable Direct Access SCSI-0 device
pass0: Serial Number 3
pass0: 1.000MB/s transfers
GEOM: new disk da0
ATA PseudoRAID loaded
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony MSC-U02 1.00> Removable Direct Access SCSI-0 device
da0: Serial Number 3
da0: 1.000MB/s transfers
da0: 123MB (253696 512 byte sectors: 64H 32S/T 123C)
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
More information about the freebsd-mobile
mailing list